Display Warning: 2018 Cadillac XTS Screen Messages Guide
Imagine yourself relaxing in the opulent 2018 Cadillac XTS cabin, prepared to go out on a voyage of style and innovation. The svelte display screen welcomes you with a plethora of information as soon as you turn on the ignition, providing a thorough overview of the modern options at your disposal. The screen is your doorway to a world of ease and sophistication, offering everything from simple infotainment options to state-of-the-art safety features. In spite of the thrill of discovering these features, you should exercise caution when using them since they may improve your driving experience but also demand close attention to prevent distractions when operating a vehicle. Therefore, keep safety first above all else as you immerse yourself in the engaging interface of the 2018 Cadillac XTS. This will guarantee a flawless blend of luxury and responsibility during your trip.
2023 Cadillac XT5 Specs, Price, Features, Mileage (Brochure)
Information Displays
Driver Information Center (DIC)
The DIC is displayed in the instrument cluster. It shows the status of many vehicle systems.
Move SEL up or down to go to the previous or next selection.
Press to move between the interactive display zones in the cluster.
Press
to go back to the previous menu.
SEL: Press to open a menu or select a menu item. Press and hold to reset values on certain screens.
DIC Information Display Options
The info displayed on the DIC can be turned on or off through the Options menu.
- Press SEL while viewing the Options page in one of the interactive display zones on the cluster.
- Scroll to Info Pages and press SEL.
- Pressto moves through the list of possible info displays.
- Press SEL while an item is highlighted to select or deselect that item. When an item is selected, a checkmark will appear next to it.
DIC Information Displays
The following is the list of all possible DIC information displays. Some of the information displays may not be available for your particular vehicle.
Speed (Base Cluster): Shows the vehicle speed in either kilometers per hour (km/h) or miles per hour (mph).
Trip 1 or Trip 2 (Base Cluster) / Trip 1 or Trip 2 and Average Fuel Economy (Uplevel Cluster): The Trip display shows the current distance traveled, in either kilometer (km) or miles (mi), since the trip odometer was last reset. The trip odometer can be reset by pressing and holding SEL while this display is active.
The Average Fuel Economy display shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now, and will change as driving conditions change. The Average Fuel Economy can be reset along with the trip odometer by pressing and holding SEL while this display is active.
Fuel Range: This shows the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle’s fuel economy over recent driving history and the amount of fuel remaining in the fuel tank.
Average Fuel Economy (Base Cluster): Shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now and will change as driving conditions change. The Average Fuel Economy can be reset by pressing and holding SEL while this display is active.
Instantaneous Fuel Economy: Shows the current fuel economy in either liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy that the vehicle has right now and changes frequently as driving conditions change.
Average Speed: Shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing and holding SEL while this display is active.
Timer: This display can be used as a timer. To start the timer, press SEL while this display is active. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, press SEL briefly while this display is active and the timer is running. To reset the timer to zero, press and hold SEL while this display is active.
Compass (Base Cluster): Shows the direction the vehicle is driving.
Turn Arrow: Shows the next maneuver when using route guidance.
Estimated Time to Arrival: Shows the estimated time until arrival at your destination.
Distance to Destination: Shows the distance to the destination when using route guidance.
Speed Limit: Shows the current speed limit. The information for this page comes from a roadway database.
Speed Warning: Allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press SEL when the Speed Warning is displayed. Press
to adjust the value. This feature can be turned off by pressing and holding SEL while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed and a chime may sound.
Best Fuel Economy: Displays average fuel economy, the best fuel economy over the selected distance, and a bar graph showing instantaneous fuel economy.
Driver Assistance (Uplevel Cluster): Shows information for Lane Keep Assist (LKA), Lane Departure Warning (LDW), and Forward Collision Alert (FCA).
Performance Timer (V Sport Only): Shows the last performance time recorded. Press and hold SEL while viewing the performance timer to reset and stop the timer. Press SEL to enter the performance timer menu. In the menu, set the start speed, set the end speed, and reset the timer.
Cruise Set Speed: Shows the speed the cruise control or Adaptive Cruise Control is set to.
Follow Distance Indicator: When Adaptive Cruise Control (ACC) is not engaged, the current follow time to the vehicle ahead is displayed as a time value on this page. When ACC has been engaged, the display switches to the gap setting page. This page shows the current gap setting along with the vehicle ahead telltale.
Battery Voltage: Shows the current battery voltage.
Oil Life: Shows an estimate of the oil’s remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains.
When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should be changed as soon as possible. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended.
The Oil Life display must be reset after each oil change. It will not reset itself. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold SEL for several seconds while the Oil Life display is active.
Tire Pressure: Shows the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber..
Vehicle Odometer (Base Cluster): Shows the odometer.
Blank Page: Allows for no information to be displayed in the cluster info display areas.
Head-Up Display (HUD)
Warning
If the HUD image is too bright or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.
If equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The image is projected through the HUD lens on top of the instrument panel. The information appears as an image focused out toward the front of the vehicle.
Caution
If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle. Do not use the HUD image as a parking aid.
The HUD information can be displayed in various languages. The speedometer reading and other numerical values can be displayed in either English or metric units.
The language selection is changed through the radio and the units of measurement is changed through the instrument cluster.
The HUD may display some of the following vehicle information and vehicle messages or alerts:
- Speed
- Tachometer
- Audio
- Phone
- Navigation
- Collision Alert
- Adaptive Cruise Control
- Lane Departure or Lane Keep Assist
- Low Fuel
Some vehicle messages or alerts displayed in the HUD may be cleared by using the steering wheel controls.
The HUD control is to the left of the steering wheel.
To adjust the HUD image:
- Adjust the driver seat.
- Start the engine.
- Use the following settings to adjust the HUD
Press down or lift up to center the HUD image. The HUD image can only be adjusted up and down, not side to side.!: Press to select the display view.
INFO Each press will change the display view.
Lift up and hold to brighten the display. Press down and hold to dim the display. Hold down to turn the display off.
The HUD image will automatically dim and brighten to compensate for outside lighting. The HUD brightness control can also be adjusted as needed.
The HUD image can temporarily light up depending on the angle and position of the sunlight on the HUD display. This is normal.
Polarized sunglasses could make the HUD image harder to see.
Head-Up Display (HUD) Rotation Option
This feature allows for adjusting the angle of the HUD image.
Press SEL on the steering wheel controls while the Head-up Display Rotation is highlighted to enter Adjust Mode. Press
to adjust the angle of the HUD display. Press
to highlight OK, then press SEL to save the setting. CANCEL can also be selected to cancel the setting. The vehicle must be in P (Park).
HUD Views
There are four views in the HUD. Some vehicle information and vehicle messages or alerts may be displayed in any view.
Speed View: This display gives the speedometer reading (in English or metric units), speed limit, Adaptive Cruise Control speed, Lane Departure Warning/Lane Keep Assist, and Vehicle Ahead indicator. Some information only appears on vehicles that have these features, and when they are active.
Audio/Phone View: This displays the speed view along with audio/phone information. The current radio station, media type, and incoming calls may be displayed.
All HUD views may briefly display audio information when the driver uses the steering wheel controls to adjust the audio settings appearing in the instrument cluster.
Incoming phone calls appearing in the instrument cluster, may also display in any HUD view.
Navigation View: This displays the speed view along with Turn-by-Turn Navigation information. When navigation routing is not active “No Route Active” is displayed. Navigation Turn-by-Turn Alerts shown in the instrument cluster may also be displayed in any HUD view.
Performance View: This displays the speedometer reading, rpm reading, transmission positions, and gear shift indicator.
Care of the HUD
Clean the inside of the windshield to remove any dirt or film that could reduce the sharpness or clarity of the HUD image.
Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it.
HUD Troubleshooting
Check that:
- Nothing is covering the HUD lens.
- HUD brightness setting is not too dim or too bright.
- HUD is adjusted to the proper height.
- Polarized sunglasses are not worn.
- The windshield and HUD lens are clean.
If the HUD image is not correct, contact your dealer.
The windshield is part of the HUD system.
Vehicle Messages
Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may appear one after another.
The messages that do not require immediate action can be acknowledged and cleared by pressing 
The messages that require immediate action cannot be cleared until that action is performed.
All messages should be taken seriously; clearing the message does not correct the problem.
If a SERVICE message appears, see your dealer.
Follow the instructions given in the messages. The system displays messages regarding the following topics:
- Service Messages
- Fluid Levels
- Vehicle Security
- Brakes
- Ride Control Systems
- Driver Assistance Systems
- Cruise Control
- Lighting and Bulb Replacement
- Wiper/Washer Systems
- Doors and Windows
- Seat Belts
- Airbag Systems
- Engine and Transmission
- Tire Pressure
- Battery
Engine Power Messages ENGINE POWER IS REDUCED
This message displays when the vehicle’s propulsion power is reduced. Reduced propulsion power can affect the vehicle’s ability to accelerate. If this message is on, but there is no observed reduction in performance, proceed to your destination. The performance may be reduced the next time the vehicle is driven. The vehicle may be driven while this message is on, but maximum acceleration and
speed may be reduced. Anytime this message stays on, or displays repeatedly, the vehicle should be taken to your dealer for service as soon as possible.
Vehicle Speed Messages
SPEED LIMITED TO XXX KM/H (MPH)
This message shows that the vehicle speed has been limited to the speed displayed. The limited speed is protection for various propulsion and vehicle systems, such as lubrication, thermal, suspension, Teen Driver if equipped, or tires.
Vehicle Personalization
The following are all possible vehicle personalization features. Depending on the vehicle, some may not be available.
For System, Apps, and Personal features and functions, see “Settings” in the infotainment manual.
To access the vehicle personalization menu
- Touch the Settings icon on the Home Page of the infotainment display.
- Touch Vehicle to display a list of available options.
- Touch to select the desired feature setting.
- Touch
- to turn a feature off or on.
- Touch
to go to the top level of the Settings menu.
The menu may contain the following:
Rear Seat Reminder
This allows for a chime and a message when the rear door has been opened before or during the operation of the vehicle.
Select Off or On.
Climate and Air Quality
Touch and the following may display:
- Auto Fan Speed
- Air Quality Sensor
- Auto Cooled Seats
- Auto Heated Seats
- Auto Defog
- Auto Rear Defog
Auto Fan Speed
This setting specifies the amount of airflow when the climate control fan setting is Auto Fan.
Touch Low, Medium, or High.
Air Quality Sensor
This setting switches the system into Recirculation Mode based on the quality of the outside air.
Touch Off, Low Sensitivity, or High Sensitivity.
Auto Cooled Seats
This setting automatically turns on and regulates the ventilated seats when the cabin temperature is warm.
Touch Off or On.
Auto Heated Seats
This setting automatically turns on and regulates the heated seats when the cabin temperature is cool. The auto-heated seats can be turned off by using the heated seat buttons on the center stack.
Touch Off or On.
Auto Defog
This setting automatically turns the front defogger on when the engine is started.
Touch Off or On.
Auto Rear Defog
This setting automatically turns the rear defogger on when the engine is started.
Touch Off or On.
Collision / Detection Systems
Touch the Collision/Detection Systems menu and the following may display:
- Alert Type
- Forward Collision System
- Adaptive Cruise Go Notified
- Lane Change Alert
- Rear Camera Park Assist Symbols
- Rear Cross Traffic Alert
Alert Type
This setting specifies the type of vehicle feedback provided, either a beep or seat vibration when you are in danger of colliding with an object.
Touch Beeps or Safety Alert Seat.
Forward Collision System
This setting controls the vehicle response when detecting a vehicle ahead of you. The Off setting disables all FCA and FAB functions. With the Alert and Brake settings, both FCA and FAB are available. The Alert setting disables FAB.
Touch Off, Alert, or Alert and Brake.
Adaptive Cruise Go Notifier
This setting determines if an alert will appear when Adaptive Cruise Control brings the vehicle to a complete stop and the vehicle ahead of you starts moving again.
Touch Off or On.
Lane Change Alert
This setting specifies if an alert will display on the outside mirror to help you avoid crashing into a vehicle in your blind spot, or rapidly approaching your blind spot, during a lane change maneuver.
Touch Off or On.
Rear Camera Park Assist Symbols
This setting enables the Rear Camera Park Assist Symbols.
Touch Off or On.
Rear Cross Traffic Alert
This setting specifies if an alert will display when the vehicle detects approaching rear cross traffic when in R (Reverse).
Touch Off or On.
Comfort and Convenience
Touch and the following may display:
- Auto Memory Recall
- Easy Exit Options
- Chime Volume
- Reverse Tilt Mirror
- Auto Mirror Folding
- Rain Sense Wipers
Auto Memory Recall
This feature automatically recalls the previously stored 1 or 2 button positions when the ignition is changed from off to on or ACC/ACCESSORY. See Memory.
Touch Off or On.
Easy Exit Options
This feature automatically recalls the previously stored exit button position when exiting the vehicle.
Touch Off or On.
Chime Volume
This setting determines the chime volume level.
Touch the controls on the infotainment display to adjust the volume.
Reverse Tilt Mirror
When on, both the driver and passenger, driver, or passenger outside mirrors will tilt downward when the vehicle is shifted to R (Reverse) to improve visibility of the ground near the rear wheels. They will return to their previous driving position when the vehicle is shifted out of R (Reverse) or the engine is turned off. Touch Off, On-Driver and Passenger, On-Driver, or On – Passenger
Auto Mirror Folding
When on, the outside mirrors will automatically fold or unfold when the Remote Keyless Entry (RKE) transmitter
the button is pressed and held.
Touch Off or On.
Rain Sense Wipers
This setting automatically turns on the wipers when moisture is detected and the wiper switch is in intermittent mode.
Touch Disabled or Enabled.
Lighting
Touch and the following may display:
- Vehicle Locator Lights
- Exit Lighting
Vehicle Locator Lights
This setting flashes the vehicle’s headlamps when
is pressed on the Remote Keyless Entry (RKE) transmitter.
Touch Off or On.
Exit Lighting
This setting specifies how long the headlamps stay on after the vehicle is turned off and exited.
Touch Off, 30 Seconds, 60 Seconds, or 120 Seconds.
Power Door Locks
Touch and the following may display:
- Open Door Anti Lock Out
- Auto Door Unlock
- Delayed Door Lock
Open Door Anti Lock Out
This setting prevents the driver door from locking when the door is open. If this setting is on, the Delayed Door Lock menu will not be available.
Touch Off or On.
Auto Door Unlock
This setting allows the selection of which doors will automatically unlock when the vehicle is shifted into P (Park).
Touch Off, All Doors, or Driver Door
Delayed Door Lock
This setting delays the locking of the vehicle’s doors.
Touch Off or On
Remote Lock, Unlock, Start
Select and the following may display:
- Remote Unlock Light Feedback
- Remote Lock Feedback
- Remote Door Unlock
- Remote Start Auto Cool Seats
- Remote Start Auto Heat Seats
- Remote Window Operation
- Passive Door Unlock
- Passive Door Lock
- Remote Left in Vehicle Alert
Remote Unlock Light Feedback
This setting flashes the exterior lamps when the vehicle is unlocked with the RKE transmitter.
Touch Off or Flash Lights
Remote Lock Feedback
This setting specifies how the vehicle responds when the vehicle is locked with the RKE transmitter.
Touch Off, Lights and Horn, Lights Only, or Horn Only.
Remote Door Unlock
This setting specifies whether all doors or just the driver door, unlock when pressing
on the RKE transmitter.
Touch All Doors or Driver Door
Remote Start Auto Cool Seats
This setting automatically turns on the ventilated seats when using the remote start function on warm days.
Touch Off or On.
Remote Start Auto Heat Seats
This setting automatically turns on the heated seats when using the remote start function on cold days.
If equipped with Auto Heated Steering Wheel, this feature will turn on when the Remote Start Auto Heated Seats turn on.
Touch Off or On.
Remote Window Operation
This setting allows the vehicle’s windows to open remotely by pressing and holding K on the RKE transmitter.
Touch Off or On.
Passive Door Unlock
This setting specifies which doors unlock when using the button on the driver door handle to unlock the vehicle.
Touch All Doors or Driver Door Only.
Passive Door Lock
This setting specifies if the vehicle will automatically lock, or lock and provide an alert after all the doors are closed, and you walk away from the vehicle with the RKE transmitter.
Touch Off, On with Horn Chirp, or On.
Remote Left in Vehicle Alert
This feature sounds an alert when the RKE transmitter is left in the vehicle. This menu also enables Remote No Longer in Vehicle Alert.
Touch Off or On.
Teen Driver
See “Teen Driver” under “Settings” in the infotainment manual.
Valet Mode
This will lock the infotainment system and steering wheel controls. It may also limit access to vehicle storage locations, if equipped.
To enable valet mode:
- Enter a four-digit code on the keypad.
- Touch Enter to go to the confirmation screen.
- Re-enter the four-digit code.
Touch Lock or Unlock to lock or unlock the system. Touch Back to go back to the previous menu.
FAQs
The tire pressure monitoring system is having problems, as shown by this warning. It is advised to check tire sensors and pressures. See your authorized Cadillac service center if the problem continues.
This signifies a low level of engine oil. After parking the car on a level area and giving it a few minutes to settle, use the dipstick to check the oil level. If needed, add more oil. Consult with your Cadillac dealer for assistance if the warning continues.
This signifies a malfunction inside the blind zone surveillance mechanism. Make sure there is no debris or obstruction obstructing the sensors. Have the system examined by a certified Cadillac technician if the notice continues to appear.
This suggests a problem with the sensors for the rear park assist. Examine the area around the sensors for any obstacles. Should the notice continue to appear, have a Cadillac service expert examine the system.
This signifies a potential issue with the power steering mechanism. After bringing the car to a safe stop, kill the engine. Verify the power steering fluid levels and belt integrity. Seek assistance from your authorized Cadillac service location if the message continues.
This suggests a problem with the stability control system, StabiliTrak. Slow down and exercise caution when driving. Steer clear of sudden movements. As soon as possible, have a Cadillac technician evaluate the system.
This suggests a problem with the system that warns of lane departure. Make sure there are no objects blocking the camera’s vision and that the windshield is clear. Have the system examined by your authorized Cadillac service center if the message continues to appear.
This suggests that there is an issue with the adaptive forward lighting setup. Examine the area around the headlights for any impediments. Should the notice continue to appear, have a Cadillac service expert examine the system.
This suggests that the airbag system is malfunctioning. To guarantee occupant safety, the system must be examined right away by a certified Cadillac technician.
This could mean that there is a problem with the battery or charging system of the car. Have your authorized Cadillac service center inspect the battery and charging system.
This suggests that there is an issue with the electronic throttle control mechanism. Slow down and exercise caution when driving. As soon as possible, have a Cadillac technician evaluate the system.
This notification suggests that the gasoline cap might not have been tightened all the way. Once the car is stopped in a secure area, tighten the gasoline cap until it clicks. Check the fuel cap for damage or replace it if needed if the notice continues.
This suggests that there might be a transmission system problem. To stop additional damage, the transmission must be examined right away by a certified Cadillac mechanic.
This suggests that there is a brake system issue. To guarantee safe operation, it is imperative that the brakes be tested right away by a certified Cadillac mechanic.
This suggests a problem with the suspension setup. To guarantee optimum vehicle performance and safety, it is advised that the suspension system be inspected by your authorized Cadillac service shop.
Useful Links
View Full PDF: 2018 Cadillac XTS Owner’s Manual| Auto User Guide
2023 Cadillac XT5 Specs, Price, Features, Mileage (Brochure)