Instrument Cluster: 2013 Cadillac ATS Setting Instructions
The 2013 Cadillac ATS’s Instrument Cluster will take you on a trip into the heart of high-tech car design. As we learn more about this amazing piece of technology, you’ll find a world of customizable controls and cutting-edge features that are meant to make your driving experience better. The Instrument Cluster is more than just a dashboard; it’s your command center while you’re on the road. It has displays that you can change to fit your needs, safety features that put your health first, and seamless smartphone interaction. To get the most out of the Cadillac ATS’s Instrument Cluster, follow this guide. It’s where innovation meets luxury to make a driving experience that is both exciting and unique to you. Get ready to change the way you interact with the road as we go over the many settings and features that make the 2013 Cadillac ATS Instrument Cluster a shining example of high-tech excellence in the car world.
Instrument Cluster
Cluster Application Displays
The cluster has three interactive display zones.
Use the five-way control on the right steering wheel control to move between the different display zones and scroll through the different displays.
The left and right zones display Driver Information Center (DIC) information. See Driver Information Center (DIC) on page 5‑26.
The center zone displays application information for navigation, audio, phone, or settings.
Navigation
If there is no active route, a compass will be displayed. If there is an active route, press SEL to end route guidance or turn the voice prompts on or off.
Audio
While the Audio application page is displayed, press SEL to enter the Audio menu. In the Audio menu search for music or change the audio source.
Phone
While the Phone application page is displayed, press SEL to enter the Phone menu. In the Phone menu, if there is no active phone call, view recent calls or scroll through contacts. If there is an active call, mute the phone or switch to handset operation.
Settings
Press SEL while the Settings application page is displayed to enter the Settings menu.
- Units: Press SEL while Units is highlighted to enter the Units menu. Choose English or metric units by pressing SEL while the desired item is highlighted. A checkmark will be displayed next to the selected item.
- Info Pages: Press SEL while Info Pages is highlighted to select the items to be displayed in the DIC information displays. See Driver Information Center (DIC) on page 5‑26.
Open Source Software: Press SEL while Open Source Software is highlighted to display open source software information.
Speedometer
The speedometer shows the vehicle’s speed in either kilometres per hour (km/h) or miles per hour (mph).
Odometer
The odometer shows how far the vehicle has been driven, in either kilometers or miles.
This vehicle has a tamper-resistant odometer. If the vehicle needs a new cluster installed, the new odometer is set to the mileage of the old odometer. If this is not possible, it is set at zero and a label is put on the driver door to show the old mileage reading.
Trip Odometer
The trip odometer can show how far the vehicle has been driven since the trip odometer was last reset The trip odometer is accessed and reset through the Driver Information Center (DIC). See Driver
Information Center (DIC) on page 5‑26.
Tachometer
The tachometer displays the engine speed in revolutions per minute (rpm).
Notice: If the engine is operated with the tachometer in the shaded warning area, the vehicle could be damaged, and the damages would not be covered by the vehicle warranty. Do not operate the engine with the tachometer in the shaded warning area.
Fuel Gauge
When the ignition is on, the fuel gauge indicates how much fuel is left in the tank. There is an arrow near the fuel gauge pointing to the side of the vehicle the fuel door is on. When the indicator is empty, the low fuel light comes on. There still is a little fuel left, but the vehicle should be refueled soon.
Here are four things that some owners ask about. None of these show a problem with the fuel gauge:
- At the service station, the fuel pump shuts off before the gauge reads full.
- It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge may have indicated the tank was half full, but it took a little more or less than half the tank’s capacity to fill the tank.
- The gauge moves a little while turning a corner or speeding up.
- The gauge takes a few seconds to stabilize after the ignition is turned on, and goes back to empty when the ignition is turned off.
Engine Coolant Temperature Gauge
This gauge measures the temperature of the vehicle’s engine.
While driving under normal operating conditions, if the needle moves into the shaded area, the engine is too hot. Pull off the road, stop the vehicle, and turn off the engine as soon as possible.
FAQ’s
The instrument cluster in the 2013 Cadillac ATS serves as the central display for crucial vehicle information such as speed, RPM, fuel levels, and warning indicators.
You can typically reset the instrument cluster on your 2013 Cadillac ATS through the vehicle’s settings menu or by disconnecting the battery for a few minutes.
Common issues with the instrument cluster in the 2013 Cadillac ATS may include display malfunctions, inaccurate readings, and intermittent backlighting problems.
If your instrument cluster displays incorrect information, it’s recommended to have it inspected by a certified technician to diagnose and address any underlying issues.
Depending on the model and trim of your 2013 Cadillac ATS, it may be possible to upgrade the instrument cluster display to a more advanced or customizable option.
Warranty coverage for the instrument cluster in the 2013 Cadillac ATS may vary depending on factors such as the vehicle’s warranty status and the specific terms and conditions of the warranty.
The lifespan of the instrument cluster in the 2013 Cadillac ATS can vary depending on factors such as usage, maintenance, and environmental conditions.
Troubleshooting steps for a malfunctioning instrument cluster in the 2013 Cadillac ATS may include checking fuse connections, ensuring proper electrical connections, and performing diagnostic scans with specialized equipment.
Yes, if the instrument cluster in the 2013 Cadillac ATS is malfunctioning beyond repair, it can typically be replaced with a new unit or repaired by a qualified technician.
The warning indicators on the instrument cluster of the 2013 Cadillac ATS include alerts for low fuel, low oil pressure, engine temperature, and various system malfunctions.
The brightness of the instrument cluster display in the 2013 Cadillac ATS can usually be adjusted using controls located on the dashboard or through the vehicle’s settings menu.
Yes, the instrument cluster in the 2013 Cadillac ATS typically features a night mode that reduces screen brightness and adjusts colors for improved visibility in low-light conditions.
The instrument cluster of the 2013 Cadillac ATS provides access to various information, including vehicle speed, fuel level, odometer readings, trip information, and system warnings.
Replacement instrument clusters for the 2013 Cadillac ATS can be sourced from authorized dealerships, certified auto parts retailers, or online marketplaces specializing in automotive components.
Useful Links:
2023 Cadillac XT5 Specs, Price, Features, Mileage (Brochure)