Instrument Cluster: 2013 Cadillac XTS Dashboard Setting Guide
The 2013 Cadillac XTS has an instrument cluster that can be rearranged. This is called the Driver Information Center (DIC), and it shows different types of information about the car and lets the driver interact with menus and features for audio, phone, and navigation apps. The DIC is a 5.7-inch electroluminescent gauge cluster with three windows. It can be set up to show a lot of the same information that is shown on a setter radio display screen in the middle window of the DIC. The five-way controller on the steering wheel lets the driver move between windows and choose to see different types of information and tasks in the center display window. The left and right DIC windows show information about the vehicle’s state, and the centre window lets the driver use audio, phone, and navigation apps by navigating through menus and choices.
2023 Cadillac XT4 Specs, Price, Features, Mileage and Torque (Review)
Instrument Cluster
Reconfigurable Instrument Cluster
There are four uplevel instrument cluster display configurations to choose from: Simple, Performance, Balanced, or Enhanced.
The Simple configuration has one interactive display zone in the center.
The Performance configuration has two interactive display zones: one in the center of the speedometer and one in the lower left of the cluster screen.
The Balanced configuration has three interactive display zones: one in the center of each of the gauges.
The Enhanced configuration has three interactive display zones.
Use the five-way control on the right side of the steering wheel to move between the different display zones and scroll through the different displays.
To change the cluster configuration:
- Find the Settings page in one of the interactive display zones on the cluster.
- Press SEL to enter the Settings menu.
- Scroll down to highlight Display Layout. Then press SEL to select it.
- Each layout in the menu is represented by a small preview image of the display layout. Scroll up or down and highlight the selection. Press SEL to select the desired cluster configuration.
- Exit the Display Layout menu by pressing
.
Cluster Application Displays
The cluster can display information regarding Navigation, Audio, and Phone.
Navigation
If there is no active route, a compass will be displayed. If there is an active route, press SEL to end route guidance or turn the voice prompts on or off.
Audio
While the Audio application page is displayed, press SEL to enter the Audio menu. In the Audio menu, search for music or change the audio source.
Phone
While the Phone application page is displayed, press SEL to enter the Phone menu. In the Phone menu, if there is no active phone call, view recent calls or scroll through contacts. If there is an active call, mute the phone or switch to the handset operation.
Cluster Settings Menu
To enter the cluster settings menu:
- Use the five-way control on the right side of the steering wheel to find the Settings page in one of the interactive display zones on the cluster.
- Press SEL on the center of the five-way control to enter the Settings menu.
- Units: Press SEL while Units is highlighted to enter the Unit menu.
Choose English or metric units by pressing SEL while the desired item is highlighted. A checkmark will be displayed next to the selected item. - Info Pages: Press SEL while Info Pages is highlighted to select the items to be displayed in the DIC info displays. See Driver Information Center (DIC) on page 5‑28. Display Layout: Press SEL while Display Layout is highlighted to change the configuration of the uplevel cluster. See “Reconfigurable Instrument Cluster” earlier in this section.
- Open Source Software: Press SEL while Open Source Software is highlighted to display open source software information.
Speedometer
The speedometer shows the vehicle’s speed in either kilometres per hour (km/h) or miles per hour (mph).
Odometer
The odometer shows how far the vehicle has been driven, in either kilometres or miles.
This vehicle has a tamper-resistant odometer. If the vehicle needs a new cluster installed, the new odometer is set to the mileage of the old odometer. If this is not possible, it is set at zero and a label is put on the driver’s door to show the old mileage reading.
Trip Odometer
The trip odometer can show how far the vehicle has been driven since the trip odometer was last reset. The trip odometer is accessed and reset through the Driver Information Center (DIC). See Driver Information Center (DIC) on page 5‑28.
Tachometer
The tachometer displays the engine speed in revolutions per minute (rpm).
Notice: If the engine is operated with the tachometer in the shaded warning area, the vehicle could be damaged, and the damages would not be covered by the vehicle warranty. Do not operate the engine with the tachometer in the shaded warning area.
Fuel Gauge
When the ignition is on, the fuel gauge indicates about how much fuel is left in the tank. There is an arrow near the fuel gauge pointing to the side of the vehicle the fuel door is on. When the indicator is empty, the low fuel light comes on. There still is a little fuel left, but the vehicle should be refueled soon.
Here are four things that some owners ask about. None of these show a problem with the fuel gauge:
- At the service station, the fuel pump shuts off before the gauge reads full.
- It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge may have indicated the tank was half full, but it took a little more or less than half the tank’s capacity to fill the tank.
- The gauge moves a little while turning a corner or speeding up.
- The gauge takes a few seconds to stabilize after the ignition is turned on, and goes back to empty when the ignition is turned off.
Engine Coolant Temperature Gauge
This gauge measures the temperature of the vehicle’s engine. While driving under normal operating conditions, if the needle moves into the shaded area, the engine is too hot. Pull off the road, stop the vehicle, and turn off the engine as soon as possible.
FAQs
The Driver Information Center (DIC) on the 2013 Cadillac XTS can be accessed through the instrument cluster.
The reconfigurable instrument cluster of the 2013 Cadillac XTS displays various vehicle information and allows interaction with audio, phone, and navigation applications.
The DIC in the 2013 Cadillac XTS is controlled using a five-way controller on the steering wheel to navigate between windows and select information in the center display window.
The Driver Information Center (DIC) in the 2013 Cadillac XTS features a 5.7-inch three-window electroluminescent gauge cluster.
The DIC in the 2013 Cadillac XTS allows access to menus and functions related to audio, phone, and navigation applications.
Navigation between different windows on the DIC of the 2013 Cadillac XTS is done using a five-way controller located on the steering wheel.
Additional button presses are needed to change settings on the DIC of a 2013 Cadillac XTS.
The instrument cluster in a 2013 Cadillac XTS enhances the driver experience by providing easy access to vital vehicle information and interactive features.
The reconfigurable instrument cluster in modern vehicles like the 2013 Cadillac XTS serves as a central hub for displaying and interacting with various vehicle functions and applications.
Familiarity with dashboard settings for owners of a 2013 Cadillac XTS enhances driving comfort and safety by allowing quick access to important vehicle information without distraction
Technology has evolved significantly in dashboard settings over time, especially in luxury vehicles like the 2013 Cadillac XTS, offering more intuitive interfaces, customization options, and integration with advanced vehicle systems.
Useful Link:
2023 Cadillac XT4 Specs, Price, Features, Mileage and Torque (Review)