Instrument Cluster: 2016 Cadillac ATS Dashboard Guide
The 2016 Cadillac ATS boasts a finely designed dashboard that skillfully combines luxury and functionality. The centerpiece is the instrument cluster, which commands attention with its elegant appearance and simple, easy-to-use arrangement. Equipped with sharp, high-definition digital screens, it provides the driver with an all-encompassing perspective of crucial car data, like speed, fuel level, and navigational cues, right at their fingertips. Every detail radiates luxury, enhanced by high-end materials and tasteful accents, while state-of-the-art technology guarantees a flawless driving experience. Every trip is a luxurious one thanks to the ATS’s dashboard, which embodies Cadillac’s dedication to style and innovation whether driving on the open road or through urban areas.
2023 Cadillac XT5 Specs, Price, Features, Mileage (Brochure)
Instrument Cluster
English with Auto Stop Shown, Metric Similar
English V-Series Shown, Metric Similar
Cluster Application Displays
The cluster has three interactive display zones.
Use the five-way control on the right steering wheel control to move between the different display zones and scroll through the different displays.
The left and right zones display Driver Information Center (DIC) information.
The center zone displays application information for the digital speedometer, navigation, audio, phone, efficiency gauge, best fuel economy, or options.
Digital Speedometer
While the digital speedometer is displayed, press SEL to select speed limit information.
Navigation
If there is no active route, a compass will be displayed. If there is an active route, press SEL to end route guidance or turn the voice prompts on or off.
Audio
While the Audio application page is displayed, press SEL to enter the Audio menu. In the Audio menu search for music, select from favorites, or change the audio source.
Phone
While the Phone application page is displayed, press SEL to enter the Phone menu. In the Phone menu, if there is no active phone call, view recent calls, select from favorites, or scroll through contacts. If there is an active call, mute the phone or switch to handset operation.
Driver Efficiency Gauge
If equipped, this gauge is a guide to driving efficiently by keeping the ball green and in the center of the gauge. Hard braking or acceleration causes the ball to travel away from the center of the gauge.
Best Fuel Economy
This page displays average fuel economy, the best fuel economy over the selected distance, and a bar graph showing instantaneous fuel economy.
Options
Press SEL while the Options application page is displayed to enter the Options menu.
Units: Press SEL while Units is highlighted to enter the Units menu. Choose English or metric units by pressing SEL while the desired item is highlighted. A checkmark will be displayed next to the selected item.
Info Pages: Press SEL while Info Pages are highlighted to select the items to be displayed in the DIC information displays.
Fav Button Options: Press SEL while Fav Button Options is highlighted to select between FAV Primary and SEEK Primary. This selection allows for the configuration of the 
steering wheel controls. When FAV Primary is selected, pressing
will go to the next or previous favorite, and pressing and holding will seek. When SEEK Primary is selected, pressing
will seek, and pressing and holding
will go to the next or previous favorite.
Tire Loading: Press SEL while Tire Loading is highlighted to change the tire loading setting. Choose Light (for comfort pressure up to three people), Eco (for Eco pressure of up to three people), or Max (for full loading) by pressing SEL while the desired item is highlighted.
Open Source Software: Press SEL while Open Source Software is highlighted to display open source software information.
Speedometer
The speedometer shows the vehicle’s speed in either kilometers per hour (km/h) or miles per hour (mph).
Odometer
The odometer shows how far the vehicle has been driven, in either kilometers or miles.
Trip Odometer
The trip odometer shows how far the vehicle has been driven since the trip odometer was last reset. The trip odometer is accessed and reset through the Driver Information Center (DIC).
Tachometer
The tachometer displays the engine speed in revolutions per minute (rpm).
For vehicles with the Stop/Start system, when the ignition is in ON/ RUN, the tachometer indicates the vehicle status. When pointing to AUTO STOP, the engine is off but the vehicle is on and can move. The engine could auto-start at any time. When the indicator points to OFF, the vehicle is off.
When the engine is on, the tachometer will indicate the engine’s revolutions per minute (rpm). The tachometer may vary by several hundred rpm’s, during the auto-stop mode, when the engine is shutting off and restarting.
A slight bump may be felt when the transmission is determining the most fuel-efficient operating range.
Caution
If the engine is operated with the rpm’s in the warning area at the high end of the tachometer, the vehicle could be damaged, and the damage would not be covered by the vehicle warranty. Do not operate the engine with the rpm’s in the warning area.
Fuel Gauge
When the ignition is on, the fuel gauge indicates how much fuel is left in the tank.
There is an arrow near the fuel gauge pointing to the side of the vehicle the fuel door is on.
When the indicator is empty, the low fuel light comes on. There still is a little fuel left, but the vehicle should be refueled soon.
Here are four things that some owners ask about. None of these show a problem with the fuel gauge:
- At the service station, the fuel pump shuts off before the gauge reads full.
- It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge may have indicated the tank was half full, but it took a little more or less than half the tank’s capacity to fill the tank.
- The gauge moves a little while turning a corner or speeding up.
- The gauge takes a few seconds to stabilize after the ignition is turned on, and goes back to empty when the ignition is turned off.
Engine Coolant Temperature Gauge
Metric
English
This gauge measures the temperature of the vehicle’s engine.
While driving under normal operating conditions, if the needle moves into the shaded area, the engine is too hot. Pull off the road, stop the vehicle, and turn off the engine as soon as possible.
FAQs
The 2016 Cadillac ATS’s instrument cluster shows the car’s speed, engine RPM, fuel level, and warning lights, among other information.
Find the brightness control button, which is usually found next to the headlight switch or in the dashboard display’s settings menu, to change the brightness of the instrument cluster in your 2016 Cadillac ATS.
Find the trip button, which is usually located on the dashboard next to the speedometer, to reset the trip odometer on your 2016 Cadillac ATS instrument cluster. To reset the trip odometer to zero, press and hold the button.
Yes, you may usually alter the instrument cluster display layout in the 2016 Cadillac ATS by using the car settings menu, which is accessed through the dashboard display screen.
The 2016 Cadillac ATS’s instrument cluster’s hues frequently denote different car statuses. For instance, the color green can denote regular operation, whereas the colors yellow or red might represent alarms or warnings.
Use the controls on the dashboard or steering wheel to browse through the menu selections until you locate the TPMS screen to get TPMS information on the instrument cluster of your 2016 Cadillac ATS.
Yes, you can usually use the vehicle settings menu to modify the units shown on the instrument cluster of your 2016 Cadillac ATS. This enables you to alternate, at your convenience, between metric and imperial units.
The presence of the check engine light on your 2016 Cadillac ATS’s instrument panel suggests that there might be a problem with the engine or emissions system.
Yes, a maintenance reminder system that can send out alerts through the instrument cluster when scheduled maintenance is needed is installed in several 2016 Cadillac ATS models.
Use the steering wheel controls to scroll through the audio menu selections displayed on the instrument cluster of your 2016 Cadillac ATS to access the audio system controls.
First, make sure the 2016 Cadillac ATS is parked on a level surface if the fuel gauge on the instrument cluster seems to be off. Have a trained technician examine the fuel system if the problem continues.
Basic navigation instructions can be shown on the instrument cluster display on certain 2016 Cadillac ATS models, however the main infotainment screen usually shows extensive maps and directions.
Make sure the car is moving at the correct pace before utilizing the steering wheel controls to engage the cruise control system on your 2016 Cadillac ATS. This can be done through the instrument cluster.
Yes, a system check capability that can be accessed through the instrument cluster is present in several 2016 Cadillac ATS models. This enables you to rapidly evaluate the condition of critical car components including the brakes, lights, and fluid levels.
Useful Links
View Full PDF: 2016 Cadillac ATS Owner’s Manual| Auto User Guide
2023 Cadillac XT5 Specs, Price, Features, Mileage (Brochure)