Instrument cluster: Cadillac CT6 2019 Warning Lights Guide
The 2019 Cadillac CT6’s cluster guide is an important link between the car and the driver; it tells them important things about the car’s state and performance. Among the many features built into this detailed guide are the indicators and warning symbols, which are very important for keeping the car safe and running smoothly. These marks are easy for the driver to understand and let them know when things are wrong, like when the engine isn’t working right or when the tire pressure is too low. Each symbol, from the well-known “check engine” light to more specialized ones like the “lane departure warning” or “adaptive cruise control status,” tells drivers important things that help them make decisions on the road. Understanding these indicators and reacting quickly to them can help keep the vehicle running at its best and improve overall driving safety. This is why the cluster guide is so important for getting around the Cadillac CT6’s complicated modern automotive technology.
2024 Cadillac CT5 Specs, Price, Features, Mileage And Review
Instrument Cluster (Base Level)
English Standard Theme Shown, Metric Similar
Cluster Menu
There is an interactive display area in the center of the instrument cluster. Use the right steering wheel control to open and scroll through the different items and displays.
Press S to access the cluster applications. Use y or z to scroll through the list of available applications. Not all applications will be available on all vehicles.
- Info App. This is where the selected Driver Information Center (DIC) displays can be viewed. See Driver Information Center (DIC) 0 150.
- Audio
- Phone
- Navigation
- Options
Audio
Press SEL to select the Audio app,
then press T to enter the Audio menu. In the Audio menu browse for music, select from the favorites,
or change the audio source. Use y or z to change the station or go to the next or previous track.
Phone
Press SEL to select the Phone app,
then press T to enter the Phone menu. In the Phone menu, if there is no active phone call, view recent calls, or scroll through contacts. If there is an active call, mute the phone or switch to handset operation.
Navigation
Press SEL to select the Navigation
app, then press T to enter the Navigation menu. If there is no active route, you can resume the last route and turn the voice prompts on/off.
If there is an active route, press SEL to cancel or resume route guidance or turn the voice prompts on or off.
Options
Press SEL to select the Options app, then press T to enter the Options
menu. Use y or z to scroll through the items.
Units: Press T while Units is displayed to enter the Units menu. Choose US or Metric by pressing SEL while the desired item is highlighted. A checkmark will be displayed next to the selected item.
Display Themes: There are two instrument cluster display configurations to choose from: Standard and Technology.
Info Pages: Press T while Info Pages is displayed to enter the Info Pages menu and select the items to be displayed in the Info app. See Driver Information Center (DIC) 0 150.
Speed Warning: The Speed Warning display allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press T when the Speed Warning is displayed. Press SEL when Enabled is highlighted. To set the speed, press T when Set Speed is highlighted. Press y or z to adjust the value. Press SEL to set the speed. Once the speed is set, this feature can be turned off by pressing SEL while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed with a chime.
Software Information: Displays open-source software information.
Instrument Cluster (Uplevel)
English Balanced Cluster Shown, Metric Similar
Reconfigurable Instrument Cluster
The cluster display layout can be changed.
The Balanced configuration has three interactive display zones: one in the center of each of the gauges.
The Enhanced configuration has three interactive display zones.
The Performance configuration has two interactive display zones.
Use the five-way control on the right side of the steering wheel to move between the different display zones and scroll through the different displays.
To change the cluster configuration:
- Find the Options page in one of the interactive display zones on the cluster.
- Press SEL to enter the
Options menu. - Scroll down to highlight Display Layout. Then press SEL to select it.
- Each layout in the menu is represented by a small preview image of the display layout. Scroll up or down and highlight the selection. Press SEL to select the desired cluster configuration.
- Exit the Display Layout menu by pressing S.
Cluster Application Displays
The cluster can display information regarding Navigation, Audio, and Phone.
Navigation
If there is no active route, a compass will be displayed. If there is an active route, press SEL to end route guidance or turn the voice prompts on or off.
Audio
While the Audio application page is displayed, press SEL to enter the Audio menu. In the Audio menu, search for music, select from favorites, or change the audio source.
Phone
While the Phone application page is displayed, press SEL to enter the Phone menu. In the Phone menu, if there is no active phone call, view recent calls, select from favorites, or scroll through contacts. If there is an active call, mute the phone or switch to handset operation.
Cluster Options Menu
To enter the cluster Options menu:
- Use the five-way control on the right side of the steering wheel to find the Options page in one of the interactive display zones on the cluster.
- Press SEL on the center of the five-way control to enter the Options menu.
Units: Press SEL while Units is highlighted to enter the Units menu. Choose U.S. or metric units by pressing SEL while the desired item is highlighted. A checkmark will be displayed next to the selected item.
Info Pages: Press SEL while Info Pages are highlighted to select the items to be displayed in the DIC info displays. See Driver Information Center (DIC) 0 150.
Display Layout: Press SEL while Display Layout is highlighted to change the configuration of the cluster. See “Reconfigurable Instrument Cluster” earlier in this section.
Speed Warning: Allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press SEL when the Speed Warning is
displayed. Press y or z to adjust the value. This feature can be turned off by pressing and holding SEL while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed and a chime may sound.
Head-up Display (HUD) Rotation: This feature allows for adjusting the angle of the HUD image. Press SEL on the steering wheel controls while the Head-up Display Rotation is highlighted to enter Adjust Mode. Press y or z to adjust the angle of the HUD display. Press S or T to highlight OK, then press SEL to save the setting. Cancel can also be selected to cancel the setting. The vehicle must be in P (Park).
Open Source Software: Press SEL while Open Source Software is highlighted to display open source software information.
Speedometer
The speedometer shows the vehicle’s speed in either kilometers per hour (km/h) or miles per hour (mph).
Odometer
The odometer shows how far the vehicle has been driven, in either kilometers or miles.
Trip Odometer
The trip odometer shows how far the vehicle has been driven since the trip odometer was last reset.
The trip odometer is accessed and reset through the Driver Information Center (DIC). See Driver Information Center (DIC) 0 150.
Tachometer
The tachometer displays the engine speed in revolutions per minute (rpm). For vehicles with the Stop/Start system, when the ignition is on, the tachometer indicates the vehicle status. When pointing to AUTO STOP, the engine is off but the vehicle is on and can move. The engine could auto-start at any time. When the indicator points to OFF, the vehicle is off.
When the engine is on, the tachometer will indicate the engine’s revolutions per minute (rpm). The tachometer may vary by several hundred rpm, during Auto Stop mode, when the engine is shutting off and restarting.
Caution
If the engine is operated with the rpm’s in the warning area at the high end of the tachometer, the vehicle could be damaged, and the damage would not be covered by the vehicle warranty. Do not operate the engine with the rpm’s in the warning area.
Fuel Gauge
Base Level Standard Theme
Uplevel Balanced Configuration
When the ignition is on, the fuel gauge indicates how much fuel is left in the tank.
There is an arrow near the fuel gauge pointing to the side of the vehicle the fuel door is on.
When the indicator is empty, the low fuel light comes on. There still is a little fuel left, but the vehicle should be refueled soon.
Here are four things that some owners ask about. None of these show a problem with the fuel gauge:
- At the service station, the fuel pump shuts off before the gauge reads full.
- It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge may have indicated the tank was half full, but it took a little more or less than half the tank’s capacity to fill the tank.
- The gauge moves a little while turning a corner or speeding up.
- The gauge takes a few seconds to stabilize after the ignition is turned on, and goes back to empty when the ignition is turned off.
Engine Oil Pressure Gauge (Base Level Cluster Only)
Metric, Standard Theme Shown
English, Standard Theme Shown
The engine oil pressure gauge shows the engine oil pressure in kPa (kilopascals) when the engine is running.
Oil pressure can vary with engine speed, outside temperature, and oil viscosity.
On some models, the oil pump will vary engine oil pressure according to engine needs. Oil pressure may change quickly as the engine speed or load varies. This is normal.
If the oil pressure warning light or Driver Information Center (DIC) message indicates oil pressure outside the normal operating range, check the vehicle’s oil as soon as possible. See Engine Oil 0 299.
2024 Cadillac CT5 Specs, Price, Features, Mileage And Review
Caution
Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil low can also damage the engine. The repairs would not be covered by the vehicle warranty. Check the oil level as soon as possible. Add oil if required, but if the oil level is within the operating range and the oil pressure is still low, have the vehicle serviced. Always follow the maintenance schedule for changing engine oil.
Engine Coolant Temperature Gauge
Base Level Metric Standard Theme
Base Level English Standard Theme
Uplevel Metric Balanced Configuration
Uplevel English Balanced Configuration
This gauge measures the temperature of the vehicle’s engine coolant. While driving under normal operating conditions, if the needle moves into the red area, the engine is too hot. Pull off the road, stop the vehicle, and turn off the engine as soon as possible.
Voltmeter Gauge (Base Level Cluster Only)
Standard Theme
When the ignition is on, this gauge indicates the battery voltage. When the engine is running, this gauge shows the condition of the charging system. The gauge can transition from a higher to lower or a lower to higher reading. This is normal. If the vehicle is operating outside the normal operating range, the charging system light comes on. See Charging System Light 0 139.
Readings outside the normal operating range can also occur when a large number of electrical accessories are operating in the vehicle and the engine is left idling for an extended period. This condition is normal since the charging system is not able to provide full power at the engine idle. As engine speeds are increased, this condition should correct itself as higher engine speeds allow the charging system to create maximum power.
The vehicle can only be driven for a short time with the readings outside the normal operating range. If the vehicle must be driven, turn off all accessories, such as the radio and air conditioner, and unplug all chargers and accessories.
Readings outside the normal operating range indicate a possible problem in the electrical system. Have the vehicle serviced as soon as possible.
FAQs
The check engine light typically signifies an issue with the engine or emissions system. It’s recommended to have it diagnosed by a mechanic.
This light indicates low oil pressure, which can lead to engine damage if not addressed promptly. Stop the vehicle and check the oil levels immediately.
The battery light indicates a problem with the charging system. It could be an issue with the alternator or battery.
This light suggests a fault in the braking system. It’s crucial to have it inspected to ensure safe braking.
The TPMS light indicates low tire pressure in one or more tires. Inflate the tires to the recommended pressure as soon as possible.
The ABS light indicates a problem with the anti-lock braking system. It’s important to have it checked as soon as possible for safe braking.
The TCS light indicates a fault in the traction control system. It may affect vehicle stability in certain driving conditions.
The airbag light indicates a fault in the airbag system. It’s essential to have it inspected, as airbags may not deploy in the event of a collision.
This light reminds occupants to fasten their seatbelts for safety.
The coolant temperature light indicates that the engine is overheating. Stop the vehicle immediately and allow it to cool down.
The low fuel light indicates that the fuel level is low and it’s time to refuel.
This light indicates low washer fluid levels, prompting a refill to ensure clear visibility through the windshield.
The door ajar light indicates that one or more doors are not fully closed.
The engine oil life indicator displays the remaining life of the engine oil before it needs to be changed.
The LDW light indicates when the vehicle is drifting out of its lane without signaling, alerting the driver to correct their course.
Useful Link:
View full PDF: Cadillac CT6 2019 User Manual | Auto User Guide
2024 Cadillac CT5 Specs, Price, Features, Mileage And Review