Screen Messages Guide: Cadillac SRX 2012 Display Features
The Cadillac SRX 2012’s screen messages, displayed on the Driver Information Center (DIC), provide essential information and warnings for drivers. Located in the center of the instrument panel, the DIC can be accessed using the menu button on the turn signal lever. It displays system information, warning messages, gear position indicators, compass readings (if equipped), trip and fuel information, fuel range, fuel economy data, average vehicle speed, timer, navigation guidance, speed limits, tire pressure, battery voltage, and oil life notifications. Drivers can reset certain features like trip odometers and oil life indicators manually. The DIC offers a range of valuable data to enhance driving awareness and maintenance monitoring.
2023 Cadillac xt6 Specs, Price, Features, Mileage and Review
Information Displays
Driver Information Center (DIC)
The DIC displays information about the vehicle. It also displays warning messages if a system problem is detected. See Vehicle Messages on pages 5‑32 for more information. All messages appear in the DIC display located in the center of the instrument panel cluster.
The vehicle may also have features that can be customized through the controls on the radio. See Vehicle Personalization on pages 5‑40 for more information. The DIC may display an indicator when the Rainsense wipers are active.
DIC Operation and Displays
The DIC has different displays which can be accessed by using the DIC buttons on the turn signal lever located on the left side of the steering wheel. The DIC displays trip, fuel, vehicle system information, and warning messages if a system problem is detected. The bottom of the DIC display shows what position the shift lever is in and the odometer. The direction the vehicle is driving will be shown on the top of the display.
DIC Buttons
- SET/CLR (Set/Clear): Use this button to set or clear the menu item when it is displayed.
(Thumbwheel): Use the thumbwheel to scroll through the items in each menu. A small marker will move up or down the side of the display as you scroll through the items. This shows where each item is on the menu.- MENU: Press this button to get to the Trip/Fuel Information Menu and the Vehicle Information Menu.
Trip/Fuel Information Menu Items
Press the MENU button on the turn signal lever until the Trip/Fuel Information Menu is displayed. Use the thumbwheel to scroll through the following possible menu items:
- Trip
- Average Fuel Economy or Average Fuel Economy and Instantaneous Fuel Economy
- Fuel Range
- Fuel Used
- Average Vehicle Speed
- Timer
- Distance to Destination
- Navigation Turn by Turn
- Speed and Curve Assist
- Digital Speedometer
- Blank
Trip
The Trip display shows the current distance traveled, in either kilometer (km) or miles (mi), since the trip odometer was last reset. The trip odometer can be reset to zero by pressing the trip reset stem or the SET/CLR button while the trip odometer display is showing.
Average Fuel Economy or Average Fuel Economy and Instantaneous Fuel Economy
The Average Fuel Economy display shows the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. The Average Fuel Economy can be reset by pressing SET/CLR while the Average Fuel Economy display is showing.
The Instantaneous Fuel Economy display shows the current fuel economy in either liter per 100 kilometers (L/100 km) or miles per gallon (mpg). This number reflects only the fuel economy that the vehicle has right now and changes frequently as driving conditions change. Unlike the average economy, this display cannot be reset.
Fuel Range
The Fuel Range display shows the approximate distance the vehicle can be driven without refueling. The fuel range estimate is based on an average of the vehicle’s fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. The fuel range cannot be reset.
Fuel Used
The Fuel Used display shows the approximate liters (L) or gallons (gal) of fuel that have been used since the last reset. The fuel used can be reset by pressing the SET/CLR button while the Fuel Used display is showing.
Average Vehicle Speed
The Average Vehicle Speed display shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing the SET/CLR button while the Average Vehicle Speed the display is showing.
Timer
This display can be used as a timer. To start the timer, press SET/CLR while the Timer is displayed. The display will show the amount of time that has passed since the timer was last reset. To stop the timer, press SET/CLR briefly while Elapsed Time is displayed. To reset the timer to zero, press and hold SET/CLR.
Distance to Destination
This display will show the vehicle distance with the estimated time of arrival to the destination. The value can be cleared or reset by pressing the SET/CLR button. Move the thumbwheel up or down to increase or decrease the destination distance value. Once the distance value is set, press SET/CLR to confirm the value.
Turn-by-Turn
This display is used for the OnStar or Navigation System Turn-by-Turn guidance. See OnStar Overview on page 14‑1 or the navigation manual, if the vehicle has navigation, for more information.
Speed and Curve Assist
This display will show the speed limit or the advised speed as determined by the information provided by the navigation system. The map database loaded in the navigation system may need to be updated periodically to display accurate information. See “Maps” in the navigation manual for information on updating the map database.
Digital Speedometer
The speedometer shows how fast the vehicle is moving in either kilometers per hour (km/h) or miles per hour (mph). The speedometer cannot be reset.
Blank Display
This display shows no information.
Vehicle Information Menu Items
Press the MENU button on the turn signal lever until the Vehicle Information Menu is displayed. Use the thumbwheel to scroll through the following possible menu items:
- Unit
- Speed Warning
- Battery Voltage
- Remaining Oil Life
- Tire Pressure
- Blank
Unit
Move the thumbwheel up or down to switch between metric or English when the Unit display is active. Press SET/CLR to confirm the setting. This will change the displays on the cluster and DIC to either metric or English measurements.
Speed Warning
Speed Warning allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press SET/CLR when the Speed Warning is displayed. After selecting ON, use the thumbwheel to increase or decrease the desired speed limit. The value can be set from 0-250 km/h (0-160 mph). Press SET/CLR to confirm. If the selected speed limit is exceeded, a pop-up warning is displayed with a chime.
Battery Voltage
This display, available on some vehicles, shows the current battery voltage. If the voltage is in the normal range, the value will be displayed. For example, the display may read BATTERY VOLTAGE 15.0 VOLTS. The vehicle’s charging system regulates voltage based on the state of the battery. The battery voltage can fluctuate while viewing this information on the DIC. This is normal. See Charging System Light on pages 5‑18 for more information. If there is a problem with the battery charging system, the DIC will display a message. See Battery Voltage and Charging Messages on pages 5‑32.
Remaining Oil Life
This display shows an estimate of the oil’s remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains.
When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. See Engine Oil Messages on page 5‑35. The oil should be changed as soon as possible. See Engine Oil on page 10‑8.
In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule in this manual. See Maintenance Schedule on page 11‑4 for more information. Remember, the Oil Life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press the SET/CLR button while the Oil Life display is active. See Engine Oil Life System on pages 10‑10.
Tire Pressure
The display will show a vehicle with the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). See Tire Pressure Monitor System on page 10‑58 and Tire Pressure Monitor Operation on page 10‑59 for more information.
Blank Display
This display shows no information.
Compass
The vehicle may have a compass display in the Driver Information Center (DIC). See Compass on pages 5‑7.
Vehicle Messages
Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may be displayed one after the other.
The messages that do not require immediate action can be acknowledged and cleared by pressing SET/CLR. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem.
Battery Voltage and Charging Messages
BATTERY SAVER ACTIVE
This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery-saver system starts reducing certain features of the vehicle that you may be able to notice. At the point that features are disabled, this message is displayed. It means that the vehicle is trying to save the charge in the battery. Turn off unnecessary accessories to allow the battery to recharge.
LOW BATTERY
This message is displayed when the battery voltage is low. See Battery on page 10‑24.
SERVICE BATTERY CHARGING SYSTEM
This message is displayed when there is a fault in the battery charging system. Take the vehicle to your dealer for service.
Brake System Messages
BRAKE FLUID LOW
This message is displayed when the brake fluid level is low. See Brake Fluid on pages 10‑23.
BRAKES OVERHEATED
This message is displayed when the brakes are becoming overheated. You may see this when driving on hills. Shift to a lower gear.
STEP ON THE BRAKE TO RELEASE PARK BRAKE
This message is displayed if you attempt to release the Electric Parking Brake without the brake pedal applied. See Parking Brake on pages 9‑30 for more information.
RELEASE PARKING BRAKE
This message is displayed if the Electric Parking Brake is on while the vehicle is in motion. Release it before you attempt to drive. See Parking Brake on pages 9‑30 for more information.
SERVICE BRAKE ASSIST
This message may be displayed when there is a problem with the brake boost assist system. When this message is displayed, the brake boost assist motor might be heard operating and you might notice pulsation in the brake pedal. This is normal under these conditions. Take the vehicle to your dealer for service.
SERVICE PARKING BRAKE
This message is displayed when there is a problem with the parking brake. Take the vehicle to your dealer for service.
Compass Messages CAL
This message is displayed when the compass needs to be calibrated. See Compass on pages 5‑7.
– – –
Three dashes will be displayed if the compass needs service. See your dealer for service.
Cruise Control Messages
APPLY BRAKE BEFORE CRUISE
If this message displays when attempting to activate cruise control, apply the brake pedal and try again.
CRUISE SET TO XXX
This message displays when the cruise control is set and shows the speed it was set to. See Cruise Control on pages 9‑36 for more information.
Door Ajar Messages
DOOR OPEN
A door open symbol will be displayed on the DIC showing which door is open. If the vehicle has been shifted out of P (Park), a DOOR OPEN message will also be displayed. Close the door completely.
HOOD OPEN
This message will display along with a hood open symbol when the hood is open. Close the hood completely.
REAR ACCESS OPEN
This message will display along with a symbol when the liftgate is open. Close the liftgate completely.
Engine Cooling System Messages
A/C OFF DUE TO HIGH ENGINE TEMP
This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the air conditioning compressor turns back on. You can continue to drive the vehicle. If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid damage to the engine.
COOLANT LEVEL LOW ADD COOLANT
This message will display if the coolant is low. See Engine Coolant on pages 10‑15.
ENGINE OVERHEATED— IDLE ENGINE
This message displays when the engine coolant temperature is too hot. Stop and allow the vehicle to idle until it cools down.
ENGINE OVERHEATED— STOP ENGINE
This message displays and a continuous chime sounds if the engine cooling system reaches unsafe temperatures for operation. Stop and turn off the vehicle as soon as it is safe to do so to avoid severe damage. This message clears when the engine has cooled to a safe operating temperature.
HIGH COOLANT TEMPERATURE
This message displays if the coolant temperature is hot. See Engine Overheating on pages 10‑18.
Engine Oil Messages
CHANGE ENGINE OIL SOON
This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the Oil Life System. See Engine Oil Life System on pages 10‑10, Driver Information Center (DIC) on page 5‑27, Engine Oil on page 10‑8, and Maintenance Schedule on page 11‑4.
ENGINE OIL HOT, IDLE ENGINE
This message displays when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down.
ENGINE OIL LOW — ADD OIL
This message displays when the engine oil level is too low. Check the oil level. See Engine Oil on page 10‑8.
OIL PRESSURE LOW — STOP ENGINE
This message displays if low oil pressure levels occur. Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check the oil as soon as possible and have the vehicle serviced by your dealer.
Engine Power Messages
ENGINE POWER IS REDUCED
This message is displayed when the vehicle’s engine power is reduced. Reduced engine power can affect the vehicle’s ability to accelerate. If this message is on, but there is no reduction in performance, proceed to your destination.
The performance may be reduced the next time the vehicle is driven. The vehicle may be driven at a reduced speed while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, the vehicle should be taken to your dealer for service as soon as possible.
Fuel System Messages
FUEL LEVEL LOW
This message displays when the vehicle is low on fuel. Refuel as soon as possible
TIGHTEN GAS CAP
This message displays when the fuel cap is not on tight. Tighten the fuel cap.
Key and Lock Messages
NO REMOTE DETECTED
This message displays when trying to start the vehicle if an RKE transmitter is not detected. The transmitter battery may be weak. See “Starting the Vehicle with a Low Transmitter Battery” under Remote Keyless Entry (RKE) System Operation on pages 2‑3.
NO REMOTE PRESS BRAKE TO RESTART
This message is displayed if the remote is no longer detected in the vehicle. Press the brake pedal to restart the vehicle.
NUMBER OF KEYS PROGRAMMED
This message displays when programming new keys to the vehicle.
REMOTE LEFT IN VEHICLE
This message displays when leaving the vehicle with the RKE transmitter still inside.
REPLACE BATTERY IN THE REMOTE KEY
This message displays when the battery in the RKE transmitter needs to be replaced.
Lamp Messages
AFL (ADAPTIVE FORWARD LIGHTING) LAMPS NEED SERVICE
This message displays when the Adaptive Forward Lighting (AFL) system is disabled and needs service. See your dealer. See Adaptive Forward Lighting (AFL) on pages 6‑3 for more information.
AUTOMATIC LIGHT CONTROL ON
This message is displayed when the exterior lamp control is in AUTO and the lights have turned on. See Twilight Sentinel on pages 6‑4.
AUTOMATIC LIGHT CONTROL OFF
This message is displayed when the exterior lamp control is in AUTO and the lights have turned off. See Twilight Sentinel on pages 6‑4.
XXX TURN INDICATOR FAILURE
When one of the turn signals is out, this message displays to show which bulb needs to be replaced. See Bulb Replacement on pages 10‑32 and Replacement Bulbs on pages 10‑40 for more information on the turn signal bulb replacement.
TURN SIGNAL ON
This message is displayed if the turn signal has been left on. Turn off the turn signal.
Object Detection System Messages
PARK ASSIST OFF
This message displays when the park assist system has been turned off or when there is a temporary condition causing the system to be disabled. See Ultrasonic Parking Assist on pages 9‑38.
SERVICE PARKING ASSIST
This message displays if there is a problem with the Ultrasonic Front and Rear Parking Assist (UFRPA) system. Do not use this system to help you park. See Ultrasonic Parking Assist on pages 9‑38 for more information. See your dealer for service.
Ride Control System Messages
SERVICE REAR AXLE
This message displays when there is a problem with the All-Wheel Drive (AWD) System. See your dealer for service.
SERVICE STABILITRAK
This message displays if there is a problem with the StabiliTrak system. See StabiliTrak® System on pages 9‑34.
SERVICE SUSPENSION SYSTEM
This message displays if there is a problem with the selective ride control. See Selective Ride Control on pages 9‑35.
SERVICE TRACTION CONTROL
This message displays when there is a problem with the Traction Control System (TCS). See Traction Control System (TCS) on pages 9‑32.
SPORT MODE ON
This message displays when Sport Mode has been activated. See Selective Ride Control on pages 9‑35 and Manual Mode on pages 9‑26 for more information.
Airbag System Messages
SERVICE AIRBAG
This message displays if there is a problem with the airbag system. Take the vehicle to your dealer for service.
Safety Belt Messages
BUCKLE SEATBELT
This message is displayed as a reminder when the safety belt is not buckled.
Anti-theft Alarm System Messages
THEFT ATTEMPTED
This message displays if the vehicle detects a tamper condition.
Service Vehicle Messages SERVICE AC SYSTEM
This message is displayed if there is a problem with the air conditioning system. Take the vehicle to your dealer for service.
SERVICE POWER STEERING
This message is displayed if there is a problem with the power steering system. Take the vehicle to your dealer for service.
SERVICE VEHICLE SOON
This message is displayed if there is a problem with the vehicle. Take the vehicle to your dealer for service.
Starting the Vehicle Messages
PRESS THE BRAKE TO START THE VEHICLE
This message is displayed when attempting to start the vehicle without first pressing the brake pedal.
SERVICE KEYLESS START SYSTEM
This message is displayed if there is a problem with the pushbutton start system. Take the vehicle to your dealer for service.
Tire Messages
SERVICE TIRE MONITOR SYSTEM
This message displays if there is a problem with the Tire Pressure Monitor System (TPMS). See Tire Pressure Monitor Operation on pages 10‑59 for more information.
TIRE LEARNING ACTIVE
This message displays when the system is learning new tires. See Tire Pressure Monitor Operation on pages 10‑59 for more information.
TIRE LOW ADD AIR TO TIRE
This message displays when the pressure in one or more of the tires is low.
This message also displays LEFT FRONT, RIGHT FRONT, LEFT REAR, or RIGHT REAR to indicate the location of the low tire. The low tire pressure warning light will also come on. See Tire Pressure Light on pages 5‑24.
If a tire pressure message appears on the DIC, stop as soon as you can. Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire and Loading Information label. See Tires on page 10‑49, Vehicle Load Limits on page 9‑10, and Tire Pressure on page 10‑56. You can receive more than one tire pressure message at a time. The DIC also shows the tire pressure values. See Driver Information Center (DIC) on page 5‑27.
Transmission Messages
SERVICE TRANSMISSION
This message displays if there is a problem with the transmission. See your dealer.
SHIFT DENIED
This message displays when using the Driver Shift Control (DSC) and attempting to shift to a gear not appropriate for the vehicle speed and engine revolutions per minute (rpm). See Manual Mode on page 9‑26 for more information.
SHIFT TO PARK
This message displays when the transmission needs to be shifted to P (Park). This may appear when attempting to remove the key from the vehicle if the vehicle is not in P (Park).
TRANSMISSION HOT — IDLE ENGINE
This message displays and a chime sounds if the transmission fluid in the vehicle gets hot. Driving with the transmission fluid temperature high can cause damage to the vehicle. Stop the vehicle and let it idle to allow the transmission to cool.
This message clears when the fluid temperature reaches a safe level.
Vehicle Reminder Messages
ICE POSSIBLE DRIVE WITH CARE
This message is displayed when ice conditions are possible.
TURN WIPER CONTROL TO INTERMITTENT FIRST
This message is displayed when attempting to adjust the intermittent wiper speed without intermittent selected on the wiper control. See Windshield Wiper/Washer on pages 5‑4.
Vehicle Speed Messages
SELECTED SPEED LIMIT EXCEEDED
This message is displayed when the vehicle speed is greater than the set speed. See “Speed Warning” under Driver Information Center (DIC) on page 5‑27.
Washer Fluid Messages
WASHER FLUID LOW ADD FLUID
This message may display when the washer fluid level is low. See Washer Fluid on pages 10‑21.
FAQs
In the 2012 Cadillac SRX, common screen messages include warnings for low fuel, tire pressure monitoring system (TPMS) alerts, service reminders, and system malfunctions.
The warning symbols and messages in the 2012 Cadillac SRX provide vital information about the vehicle’s status and any potential issues that require attention.
If you encounter a screen message indicating a system malfunction in the 2012 Cadillac SRX, it’s essential to address the issue promptly by consulting a qualified technician or visiting a Cadillac dealership for diagnosis and repairs.
Yes, certain screen messages in the 2012 Cadillac SRX, such as warnings for low oil pressure or engine overheating, require immediate action to prevent potential damage to the vehicle. Pull over safely and shut off the engine if you encounter such messages.
Screen messages in the 2012 Cadillac SRX can typically be cleared or dismissed by acknowledging the message using the appropriate button on the steering wheel or touchscreen interface.
Yes, the 2012 Cadillac SRX may store a history of past screen messages, which can be accessed through the vehicle’s diagnostic system or by consulting a service technician.
Yes, the 2012 Cadillac SRX may display screen messages to remind drivers of scheduled maintenance intervals, such as oil changes, tire rotations, or inspections.
Yes, the 2012 Cadillac SRX may offer language customization options for screen messages, allowing users to select their preferred language for display.
Yes, the 2012 Cadillac SRX may display screen messages related to vehicle performance or driving dynamics, such as traction control warnings or alerts for slippery road conditions.
If screen messages appear intermittently in the 2012 Cadillac SRX, it’s advisable to check for loose connections or faulty sensors.
Yes, the 2012 Cadillac SRX may display screen messages related to vehicle security or anti-theft systems, such as warnings for unauthorized entry or attempted theft. Ensure these systems are properly activated and functioning.
Useful Links
2023 Cadillac xt6 Specs, Price, Features, Mileage and Review
