Warning Symbols: 2014 Cadillac Escalade Cluster Guide
The instrument cluster of the 2014 Cadillac Escalade functions as a sophisticated command center, fusing functionality and style to create a comprehensive and user-friendly interface for drivers. Located in the center of this opulent car, the dashboard symbols serve as visual representatives of the Escalade’s cutting-edge technological prowess and are essential for providing the driver with important information. Every symbol is a pixelated representation of the complex systems inside the car, converting complex information into clear and understandable visual cues. The instrument cluster transforms into a symphony of illuminated icons for everything from safety alerts to engine diagnostics, giving the driver a better understanding of the Escalade’s performance and enhancing their driving experience.
2023 Cadillac Escalade Specs, Price, Features, Mileage and Torque
Instrument Cluster
English Shown, Metric Similar
Speedometer
The speedometer shows the vehicle’s speed in either kilometres per hour (km/h) or miles per hour (mph).
Odometer
The vehicle’s odometer works together with the Driver Information
Center (DIC). The Trip odometer can be set. See “Trip Odometer” under Driver Information Center (DIC) for more information.
To check the odometer mileage while the vehicle is not running,
press the trip stem on the instrument panel cluster.
If the vehicle ever needs a new odometer installed, the new one will
be set to the correct mileage total of the old odometer.
Trip Odometer
The trip odometer can show how far the vehicle has been driven since the trip odometer was last set to zero.
For more information see “Trip Odometer” under Driver Information Center (DIC).
Tachometer
The tachometer displays the engine speed in revolutions per minute (rpm).
Fuel Gauge
When the ignition is on, the fuel gauge indicates about ut how much fuel is left in the tank.
An arrow on the fuel gauge indicates the side of the vehicle the fuel door is on.
The gauge will first indicate empty before the vehicle is out of fuel, but
the vehicle’s fuel tank should be filled soon.
Here are four things that some owners ask about. None of these show a problem with the fuel gauge:
- At the service station, the fuel pump shuts off before the gauge reads full.
- It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge may have indicated the tank was half full, but it took a little more or less than half the tank’s capacity to fill the tank.
- The gauge moves a little while turning a corner or speeding up.
- The gauge takes a few seconds to stabilize after the ignition is turned on, and goes back to empty when the ignition is turned off.
Engine Coolant Temperature Gauge
This gauge shows the engine coolant temperature.
If the indicator on the gauge moves towards the shaded area on the
thermostat, it means that the engine coolant has overheated. If the vehicle has been operating under normal driving conditions, pull off the road, stop the vehicle and turn off the engine as soon as possible
Safety Belt Reminders
Driver Safety Belt Reminder Light
There is a driver safety belt reminder light on the instrument cluster.
When the vehicle is started this light flashes and a chime comes on to remind drivers to fasten their safety belts. Then the light stays on solid until the belt is buckled. This cycle may continue several times if the driver remains or becomes unbuckled while the vehicle is moving.
If the driver safety belt is buckled, neither the light nor the chime comes on.
Passenger Safety Belt Reminder Light
There is a passenger safety belt reminder light near the passenger airbag status indicator.
When the vehicle is started this light flashes and a chime may come on to remind the front passenger to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle may continue several times if the passenger remains or becomes unbuckled while the vehicle is moving.
If the front passenger safety belt is buckled, neither the chime nor the light comes on.
The front passenger safety belt reminder light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop, or other electronic device. To turn off the reminder light and/or chime, remove the object from the seat or buckle the safety belt.
Airbag Readiness Light
This light shows if there is an electrical problem with the airbag system. The system check includes the airbag sensor(s), the passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module.
The airbag readiness light comes on for several seconds when the vehicle is started. If the light does not come on then, have it fixed immediately.
Warning
If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away.
If there is a problem with the airbag system, a Driver Information Center (DIC) message may also come on.
Passenger Airbag Status Indicator
This gauge shows the engine coolant temperature.
If the indicator on the gauge moves towards the shaded area on the
thermostat, it means that the engine coolant has overheated. If the
vehicle has been operating under normal driving conditions, pull off the road, stop the vehicle and turn off the engine as soon as possible
United States
Canada and Mexico
When the vehicle is started, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off, for several seconds as a system check. Then, after several more seconds, the status indicator will light either ON or OFF, or either the on or off symbol to let Do you know the status of the front outboard passenger frontal airbag.
If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the front outboard passenger frontal airbag is allowed to inflate.
If the word OFF or the off symbol is lit on the passenger airbag status indicator, it means that the passenger sensing system has turned off the front outboard passenger frontal airbag.
If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service.
Warning
If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness including important safety information.
Charging System Light
The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working.
If it does not, have the vehicle serviced by your dealer.
The light should go out once the engine starts. If it stays on, or comes on while driving, there could be a problem with the charging system. A charging system message in the Driver Information Center (DIC) can also appear. See Battery Voltage and Charging Messages for more information. This light could indicate that there are problems with a generator drive belt, or that there is an electrical problem. Have it checked right away. If the vehicle must be driven a short distance with the light on, turn off accessories, such as the radio and air conditioner.
Malfunction Indicator Lamp (Check Engine Light)
A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors the operation of the vehicle to ensure emissions are at acceptable levels, helping to maintain a clean environment. The malfunction indicator lamp comes on when the vehicle is placed in
Service Only Mode, as a check to show it is working. If it does not, have the vehicle serviced by your dealer.
If the malfunction indicator lamp comes on while the engine is
running, this indicates that there is an OBD II problem, and diagnosis and service might be required.
Malfunctions often are indicated by the system before any problem is apparent. Being aware of the light can prevent more serious damage to the vehicle. This system also assists the service technician in correctly diagnosing any malfunction.
Notice:
If the vehicle is driven continually with this light on, the emission control system may not work as well, the fuel economy may be lower, and the vehicle may not run smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty.
Notice:
Modifications made to the engine, transmission, exhaust, intake, or fuel system of the
vehicle or the replacement of the original tires with other than those of the same Tire Performance Criteria (TPC) can affect the vehicle’s emission controls and can cause this light to come on. Modifications to these systems could lead to costly repairs not covered by the vehicle warranty. This could also result in a failure to pass a required Emission Inspection/ Maintenance test.
This light comes on during a malfunction in one of two ways:
Light Flashing: A misfire condition has been detected. A misfire increases vehicle emissions and could damage the emission control system on the vehicle. Diagnosis and service might be required.
This light comes on during a malfunction in one of two ways:
- Reduce vehicle speed.
- Avoid hard accelerations.
- Avoid steep uphill grades.
- If towing a trailer, reduce the amount of cargo being hauled as soon as it is possible.
If the light continues to flash, stop and park the vehicle. Turn the vehicle off, wait at least 10 seconds, and restart the engine. If the light is still flashing, follow the previous steps and see your dealer for service as soon as possible.
Light On Steady: An emission control system malfunction has been detected on the vehicle. Diagnosis and service might be required.
The following may correct an emission control system malfunction:
- Check that the fuel cap is fully installed. See Filling the Tank on The diagnostic system can determine if the fuel cap has been left off or improperly installed. A loose or missing fuel cap allows fuel to evaporate into the atmosphere. A few driving trips with the cap properly installed should turn the light off.
- Check that good quality fuel is used. Poor fuel quality causes the engine not to run as efficiently as designed and may cause stalling after start-up, stalling when the vehicle is changed into gear, misfiring, hesitation on acceleration, or stumbling on acceleration.
These conditions might go away once the engine is warmed up.
If none of the above have made the light turn off, your dealer can check the vehicle. The dealer has the proper test equipment and
diagnostic tools to fix any mechanical or electrical problems that might have developed.
Emissions Inspection and Maintenance Programs
Depending on where you live, your vehicle may be required to participate in an emission control system inspection and maintenance program. For the inspection, the emission system test equipment will likely connect to the vehicle’s Data Link Connector (DLC).
If none of the above have made the light turn off, your dealer can check the vehicle. The dealer has the proper test equipment and diagnostic tools to fix any mechanical or electrical problems that might have developed.
The vehicle may not pass inspection if:
- The malfunction indicator lamp is on with the engine running, or if the vehicle is placed in Service Only Mode and the malfunction indicator lamp does not come on. See your dealer for assistance in verifying the proper operation of the malfunctioning indicator lamp.
- The OBD II (On-Board Diagnostics) system determines that critical emission control systems have not been completely diagnosed. The vehicle would be considered not ready for inspection. This can happen if the 12-volt battery has recently been replaced or run down. The diagnostic system is designed to evaluate critical emission control systems during normal driving. This can take several days of routine driving. If this has been done and the vehicle still does not pass the inspection for lack of OBD II system readiness, your dealer can prepare the vehicle for inspection.
Brake System Warning Light
With the ignition on, the brake system warning light comes on
when the parking brake is set. If the vehicle is driven with the parking brake engaged, a chime sounds when the vehicle speed is greater than 5 km/h (3 mph).
The vehicle brake system consists of two hydraulic circuits. If one
circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need to
be working.
If the warning light comes on and a chime sounds there could be a brake problem. Have the brake system inspected by your dealer.
This light can also come on due to low brake fluid.
This light comes on briefly when the ignition is turned to ON/RUN. If it does not, have it fixed so it will be ready to warn if there is a problem. If the light comes on while driving, pull off the road and stop carefully.
The pedal could be harder to push or could go closer to the floor. It can take longer to stop. If the light is still on, have the vehicle towed for service.
Warning
The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service.
Antilock Brake System (ABS) Warning Light
For vehicles with the Antilock Brake System (ABS), this light comes on briefly when the engine is started.
If it does not, have the vehicle serviced by your dealer. If the system is working normally the indicator light then goes off.
If the ABS light stays on, turn the ignition off. If the light comes on while driving, stop as soon as it is safely possible and turn the ignition
off. Then start the engine again to reset the system. If the ABS light stays on, or comes on again while driving, the vehicle needs service.
If the regular brake system warning light is not on, the vehicle still has brakes, but not antilock brakes.
If the regular brake system warning light is also on, the vehicle does not have antilock brakes and there is a problem with the regular brakes.
See Brake System Warning Light For vehicles with a Driver Information Center (DIC).
Tow/Haul Mode Light
For vehicles with the Tow/Haul Mode feature, this light comes on when the Tow/Haul Mode has been activated.
StabiliTrak® OFF Light
This light comes on briefly while starting the engine.
If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off.
Press and release the Traction Control System (TCS)/StabiliTrak button to turn off TCS, and a message displays in the DIC.
Press and briefly hold the TCS/ StabiliTrak button to turn off the
StabiliTrak system; the StabiliTrak Off light comes on and a message appears in the Driver Information Center (DIC).
If the StabiliTrak/TCS system is off, the system does not assist in
controlling the vehicle. Turn on the StabiliTrak/TCS system and the
indicator light turns off.
See StabiliTrak® System and Ride Control System Messages o for more information.
Traction Control System (TCS)/StabiliTrak® Light
The TCS/StabiliTrak light comes on briefly when the engine is started.
If the light does not come on or stays on, have the vehicle serviced by the dealer. If the system is working normally, the indicator light turns off.
If the light comes on and stays on while driving, and a message displays in the Driver Information Center (DIC), have the vehicle serviced by the dealer. See Ride Control System Messages for more information.
If the light flashes while driving, this means that StabiliTrak or TCS is assisting in controlling the vehicle. See StabiliTrak® System for more information.
Tire Pressure Light
For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS.
When the Light Is On Steady
This indicates that one or more of the tires are significantly underinflated. A Driver Information Center (DIC) tire pressure message may also be displayed. Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label.
When the Light Flashes First and Then Is On Steady
If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on at every ignition cycle.
Engine Oil Pressure Light
Notice:
Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil low can also damage the engine. The repairs would not be covered by the vehicle warranty. Check the oil level as soon as possible. Add oil if required, but if the oil level is within the operating range and the oil pressure is still low, have the vehicle serviced. Always follow the maintenance schedule for changing engine oil.
This light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem.
Security Light
The security light should come on briefly as the engine is started. If it
does not come on, have the vehicle serviced by your dealer.
If the system is working normally, the indicator light turns off. If the light stays on and the engine does not start, there could be a problem with the theft-deterrent system.
This light is also used to indicate the status of the anti-theft alarm system when the ignition is turned off. The light will flash rapidly if the alarm system is arming and one or more of the monitored entry points is not closed. The light will stay on if the alarm is arming and all entry points are closed.
For information regarding this light and the vehicle’s security system,
see Vehicle Alarm System
High-Beam On Light
This light comes on when the high-beam headlamps are in use.
See Headlamp High/Low-Beam Changer for more information.
Front Fog Lamp Light
The front fog lamp light comes on when the fog lamps are in use.
The light goes out when the fog lamps are turned off. See Fog
Lamps for more information
Lamps On Reminder
This light comes on whenever the parking lamps are on.
Cruise Control Light
This light comes on when the cruise control is set.
This light goes out when the cruise control is canceled.
FAQs
The “2014 Cadillac Escalade” symbol is a general status indicator that usually denotes that the vehicle’s systems are functioning.
The oil pressure warning light indicates low oil pressure and warns you to take quick action to avoid damaging the engine.
The check engine light might point to a problem with the car’s engine or emissions system. To find and fix the exact issue, it is advised that the car be diagnosed by a qualified mechanic.
The battery light indicates a problem with the charging system. Verify the alternator belt and battery connections. To avoid a potential breakdown, get professional help if the light continues to appear.
The ABS light suggests that there might be a problem with the anti-lock braking system. It is recommended that a trained technician inspect the braking system.
An overheating engine is indicated by the temperature warning light. Once you’ve safely stopped, turn off the engine and let it cool. Inspect the coolant levels and, if necessary, seek expert assistance.
Which typically requires a combination of key turns and button presses.
There may be a problem with the airbag system as indicated by the airbag warning light. To guarantee appropriate functionality, professional diagnosis and repair are necessary.
It means that the traction control system is actively attempting to keep the vehicle in motion. If it remains lit, there might be a problem that needs to be fixed.
When the car is parked and locked, the security system light blinking is typical.
Check the brake system warning light as soon as the vehicle starts up. If it stays lit while you’re driving, get the braking system checked out right away.
Overheating is indicated by the transmission temperature warning light. Check fluid levels, let the transmission cool, and safely stop.
Useful Links
View Full PDF: 2014 Cadillac Escalade Owner’s Manual | Auto User Guide
2014 Cadillac Escalade Display Warning Messages Guide
2023 Cadillac Escalade Specs, Price, Features, Mileage and Torque