Cadillac XT4 2023 User Guide
I’m sorry, but I don’t know anything about the Cadillac XT4 for the year 2023 as of September 2021, which is when I last checked. But I can tell you what I know about the Cadillac XT4 in general based on what I knew at the time.
The Cadillac XT4 is a luxury small crossover SUV made by the General Motors brand Cadillac. It came out for the first time for the 2019 model year, so it is still pretty new. In Cadillac’s SUV range, the XT4 comes after the bigger XT5, but before the smaller XT3.
In terms of style, the XT4 has a bold, angular look on the outside that is typical of Cadillac. The cabin has a mix of high-quality materials, high-tech features, and comfort features that are usually found in luxury cars.
The 2021 Cadillac XT4 could be bought with a turbocharged 2.0-liter four-cylinder engine that made about 237 horsepower. It was easy to drive and had a smooth feel, and buyers could choose between front-wheel drive and all-wheel drive.
In terms of technology and features, the XT4 had a number of modern safety systems and driver assistance features, such as automatic emergency braking, lane-keeping assist, blind-spot monitoring, and a surround-view camera system. Most infotainment systems had an 8-inch tablet display, a way to connect a smartphone, and a high-quality sound system.
Since my information isn’t up-to-date, I suggest checking with official Cadillac sources or going to a Cadillac dealership to get the most correct and up-to-date information on the 2023 Cadillac XT4 model.
\
Instrument Panel Overview
- Air Vents 0 225.
- Exterior Lamp Controls 0 148.
Turn Signal Lever. See Turn and Lane-Change Signals 0 152.
IntelliBeam System Button (If Equipped). See Exterior Lamp Controls 0 148. - Tap Shift Controls. See Manual Mode 0 262 (If Equipped).
- Instrument Cluster 0 119. Driver Information Center (DIC) Display. See Driver Information Center (DIC) 0 136.
- Windshield Wiper/Washer 0 110. Rear Window Wiper/Washer 0 113.
- ENGINE START/STOP Button. See Ignition Positions 0 247.
- Light Sensor. See Automatic Headlamp System 0 151.
- Home Button. See Overview 0 157.
- Dual Automatic Climate Control System 0 221.
- Heated and Ventilated Front Seats 0 53 (If Equipped).
- Lane Keep Assist (LKA) 0 307 (If Equipped).
- Power Outlets 0 115.
- MODE Switch. See Driver Mode Control 0 269.
- Auto Stop Disable Switch. See Stop/Start System 0 249.
- Traction Control/Electronic Stability Control 0 267.
- Hazard Warning Flashers 0 152.
- USB Port 0 169.
- Infotainment Controls. See Overview 0 157.
- Shift Lever. See Automatic Transmission 0 257.
- Park Assist Button. See Assistance Systems for Parking or Backing 0 286. Automatic Parking Assist (APA) Button. See Assistance Systems for Parking or Backing 0 286.
- Steering Wheel Controls 0 159.
Driver Information Center (DIC) Controls. See Driver Information Center (DIC) 0 136. - Horn 0 110.
- Steering Wheel Adjustment 0 109 (Out of View).
- Cruise Control 0 270. Adaptive Cruise Control (Advanced) 0 273 (If Equipped).
Heated Steering Wheel 0 110 (If Equipped). Forward Collision Alert (FCA) System 0 297 (If Equipped). - Head-Up Display (HUD) 0 139 (Out of View) (If Equipped).
- Data Link Connector. See Malfunction Indicator Lamp (Check Engine Light) 0 126 (Out of View).
- Instrument Panel Illumination Control 0 153.
- Hood Release. See Hood 0 329 (Out of View).
- Electric Parking Brake 0 264.
Keys and Locks
WARNING:
Leaving children in a vehicle with a remote key is dangerous and children or others could be seriously injured or killed. They could operate the power windows or other controls or make the vehicle move. The windows will function with the remote key in the vehicle, and children or others could be caught in the path of a closing window. Do not leave children in a vehicle with a remote key.
Keyless Unlocking/Locking from the Driver Door
When the doors are locked and the remote key is within 1 m (3 ft) of the driver door handle, pressing the lock/unlock button on the driver door handle will unlock the driver door. If the lock/unlock button is pressed again within five seconds, all passenger doors will unlock.
Disabling Keyless Unlocking:
With the vehicle off, press and hold Q and K on the remote key at the same time for approximately three seconds. The turn signal lamps will flash four times quickly to indicate access is disabled. Using any exterior handle to unlock the doors or open the liftgate will cause the turn signal lamps to flash four times quickly, indicating access is disabled. If disabled, disarm the alarm system before starting the vehicle.
Enabling Keyless Unlocking:
With the vehicle off, press and hold Q and K on the remote key at the same time for approximately three seconds. The turn signal lamps will flash twice quickly to indicate access is enabled.
Passive Locking
With Keyless Access this vehicle will lock several seconds after all doors are closed if the vehicle is off and at least one remote key has been removed or none remain in the interior.
If other electronic devices interfere with the remote key signal, the vehicle may not detect the remote key inside the vehicle. If passive locking is enabled, the doors may lock with the remote key inside the vehicle. Do not leave the remote key in an unattended vehicle.
To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Power Door Locks”.
Temporary Disable of Passive Locking
Temporarily disable passive locking by pressing and holding K on the interior door switch with a door open for at least four seconds, or until three chimes are heard. Passive locking will then remain disabled until Q on the interior door is pressed, or until the vehicle is turned on.
Programming with Recognized Remote Keys
A new remote key can be programmed to the vehicle when there are two recognized remote keys. To program, the vehicle must be off and all of the remote keys, both currently recognized and new, must be with you.
- Remove the key from the remote key.
- Place the two recognized remote keys into the front cupholder.
- Remove the key lock cylinder cap on the driver door handle. See Door Locks 0 20. Insert the vehicle key of the remote key into the key lock cylinder on the driver door and turn e key counterclockwise, to the unlock position, five times within 10 seconds. The DIC displays READY FOR REMOTE #3, 4, 5, ETC.
- Place the new remote key into the front cupholder.
- Press ENGINE START/STOP. When the remote key is learned the DIC display will show that it is ready to program the next remote key.
- Remove the remote key from the front cupholder. and press the remote key K or Q button. To program additional remote keys, repeat Steps 3–5. When all additional remote keys are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
- Return the key back to the remote key.
- Replace the key lock cylinder cap. See Door Locks 0 20.
Battery Replacement
WARNING:
Never allow children to play with the remote key. The remote key contains a small battery, which can be a choking hazard. If swallowed, internal burns can occur, resulting in severe injury or death. Seek medical attention immediately if a battery is swallowed.
To avoid personal injury, do not touch metal surfaces on the remote key when it has been exposed to extreme heat. These surfaces can be hot to the touch at temperatures above 59 °C (138 °F).
CAUTION:
When replacing the battery, do not touch any of the circuitry on the remote key. Static from your body could damage the remote key. Always replace the battery with the correct type. Replacing the battery with an incorrect type could potentially create a risk of battery explosion. Dispose of used batteries according to instructions and local laws. Do not attempt to burn, crush, or cut the used battery, and avoid exposing the battery to environments with extremely low air pressures or high temperatures.
If the remote key is not reassembled properly, liquids could enter the housing and damage the circuitry, resulting in a remote key malfunction and/or failure. To prevent damage, always follow the steps for remote key reassembly in this manual to ensure the remote key is sealed properly whenever the remote key is opened.
Canceling a Remote Start
To cancel a remote start, do any of the following:
- Press and hold / until the parking lamps turn off.
- Turn on the hazard warning flashers.
- Turn the vehicle on and then off.
Reference Links
Download Manuals: https://www.cadillac.com/support/vehicle/manuals-guides