Ancel as100 Engine Code Reader Scanner User Manual | Usage Manual

Ancel as100 Engine Code Reader Scanner User Manual

For car maintenance and troubleshooting, Ancel offers an effective and user-friendly diagnostic instrument called the AS100 Engine Code Reader Scanner. This little gadget is especially useful for novice mechanics and car owners since it provides an easy-to-use method of locating problems with the engine and emissions systems of the vehicle. The AS100 offers extensive coverage for a range of automobile types and is compatible with the majority of OBD2-compliant vehicles, which are generally those made from 1996 onwards in the USA and 2001/2004 for gas and diesel vehicles in Europe. The scanner’s operation is straightforward: all you have to do is put it into your car’s OBD2 port, which is often located under the dashboard, and it will turn on immediately. Reading and clearing both manufacturer-specific and generic Diagnostic Trouble Codes (DTCs), it can assist in determining the reason why the Check Engine Light is on. In addition, the AS100 can display freeze frame data, which provides information on the state of the vehicle at the moment of a fault, and facilitates I/M readiness checks, which are necessary for emissions testing. Even individuals with limited knowledge in car diagnostics may easily navigate through the capabilities of the scanner thanks to its clear LCD and straightforward interface. For routine auto maintenance, the Ancel AS100 Engine Code Reader Scanner is a useful instrument that provides an affordable way to identify and fix engine-related problems.

Ancel as100 INFORMATION

Tool Description

1. LCD DISPLAY
2. Green LED: indicates correct engine operation, no DTC.
3. Yellow LED: indicates a possible problem. Some diagnostics could not be performed and/or a DTC is pending.
4. Red LED: indicates a problem with the engine. The”MIL(Malfunction Indicator Light)” may be on.
5. BACK BUTTON
6. OBDII CONNECTOR
7. UP BUTTON
8. OK BUTTON
9. DOWN BUTTON

Product Specifications

Function Description

1. Dual-system diagnostic, optional engine and transmission.
2. Quickly indicate engine faults, with green yellow I red LED indicators as fault lights.
3. Read or clear the engine fault code and view the DTC definition.
4. Display of sensor data stream information, supporting 249 types of parameters. View freeze frame data and 1/M status information.
5. Read vehicle information:
   vehicle identification number (VIN), calibration identification number(!Ds), calibration verification number(CVNs)
    
6. Multi-language.

How To Use Ancel as100

The Ancel AS100 is a simple OBD2 (On-Board Diagnostics) code reader tool that can help you figure out what’s wrong with your car’s engine. Here’s a general idea of how to use it:

1. Search for the OBD2 Port: The OBD2 port is usually under the dashboard on the car’s driver’s side. To get to it, you might have to take off a panel or cover, but it’s normally close to the steering column.
2. Turn Off the Car: Make sure the key is out of the ignition before you plug in the scanner.
3. Connect the Scanner: Plug the plug for the AS100 scanner into the OBD2 port. It should be simple to snap in place.
4. Turn on the Ignition: In some cars, you may need to turn the key to the “On” position before you can start the engine. Read the scanner’s manual to find out how to use it with your car.
5. Start the Scanner: To start the Ancel AS100, press the power button, if it has one. When you plug some scanners into the OBD2 port, they may turn on by themselves.
6. How to Use the Menu: The AS100 may have a simple menu system with buttons or a screen that you can use to move around. To choose from the menu items and move between them, use the arrow keys or buttons.
   To read the codes, choose “Read Codes” or “Scan for Codes.” The scanner will talk to the main computer of your car to get diagnostic trouble codes (DTCs).
7. Look at the codes: Any trouble numbers that the scanner gets from the car’s computer will be shown on the screen. These codes are made up of letters and numbers and tell you what’s wrong with your car. Note these numbers so that you can look at them more deeply.
   “Clear Codes” is an option that you can choose from the scanner menu if you have fixed the problem that caused the trouble codes and want to get rid of them from the car’s computer.
8. See Real-Time Data (Optional): Some scanners, like the AS100, may let you see real-time data from different sensors and factors. This can help you figure out what’s wrong or keep an eye on how the car is running.
9. Exit and Disconnect: When you’re done using the scanner, leave the screen, turn off the engine, and remove the scanner from the OBD2 port.
10. Fix the Problems: Now that you have the trouble codes, you can look into the specific problems that they are indicating and take the necessary steps to fix them.

FAQs of Ancel as100