Ancel DP500 Car key programmer User Manual

Ancel DP500 Car key programmer User Manual

Ancel DP500 Car Key Programmer is a locksmith and automotive professional’s specialist tool. Because of its sophisticated key programming features, it’s a great help when it comes to car security and access. This gadget is capable of programming key fobs, making duplicate keys, and resetting immobilizers, among other related activities. The DP500 offers versatility in its application and compatibility with a broad range of vehicle makes and models. Its clear display and user-friendly interface make complicated programming processes easier to understand. The gadget supports contemporary car key technology and can handle a variety of key kinds, including transponder, remote, and smart keys. It can also be used to enable or disable keys, read key data, and extract PIN codes. In addition to being a key programmer, the Ancel DP500 is a complete solution for car security and keys, providing accuracy, dependability, and efficiency in key programming and associated diagnostics. For automotive locksmiths and technicians who frequently handle with vehicle keys and security systems, this tool is indispensable due to its sophisticated capabilities and user-friendly interface.

How to Use Ancel DP500

A set of procedures is needed to program, duplicate, or alter car keys for different automobile models when using the Ancel DP500 Car Key Programmer.

This is how to apply it:

1. Assemble Your Equipment: Make sure the Ancel DP500 is powered on or charged. assemble all required tools and keys, including any current keys that require duplication or reprogramming.
2. Car Preparation: Park the car in a safe and secure area. Make sure you turn it off before you start the programming.
3. Link the DP500: Switch on the Ancel DP500 and link it to the car’s OBDII port, which is often found next to the steering wheel under the dashboard.
4. Start the Device: Permit the DP500 to get started and connect to the car’s internal computer system. This could require a short while.
5. Choose Vehicle Make and Model: To choose the precise make and model of the car you are working with, navigate the DP500’s menu. Make sure you select the appropriate options for precise programming.
6. Select the Programming Function: The DP500 may be used for a number of tasks, including reading PIN codes, programming keys, duplicating keys, and resetting immobilizers. Choose the function that is right for the job at hand.
7. Put the Key or Fob in: As directed by the DP500, either put the key in the ignition or the key fob in the programming area, depending on the task you are completing.
8. Observe On-Screen Directions: The DP500 will display comprehensive instructions on screen. Pay close attention to these directions in order to program or reset the key.
9. Test the Key: Make sure the key or fob functions properly by testing it after programming. This could include opening doors, firing up the engine, or checking out remote controls.
10. Disconnect the DP500: Unplug the DP500 from the OBDII port and turn it off when the programming has been successfully tested.
11. Refer to the handbook: Refer to the Ancel DP500 user handbook for more information, including advanced functions and troubleshooting procedures. Certain vehicles could have particular protocols or demands.
12. Safety and Precautions: When programming keys, always make sure you follow automobile safety regulations and don’t harm the car’s electronic system.

Given its complexity, the Ancel DP500 calls for a high degree of technical proficiency and comprehension of automotive essential systems. Consider speaking with an expert if you’re not familiar with key programming or the particular specifications of your car.

FEATURES

1. Diagnostic function:
   Classify special functions: ABS, Battery match, CVT learning, EPB, Gear learning, Immobilizer, Cluster calibrate, steering angle reset etc. Specially designed for the Android platform with a clear and user-friendly interface;
2. Maintenance database:
   Equipped with a powerful database.
3. One Key Upgrade:
   Built-in WIFI mode can realize application downloading and diagnostic functions with one key upgrade.
4. System setting:
   Set VCI formation, language, unit, data logging, user information etc.
5. Remote assistance:
   Achieve remote assistance with this function.

KNOWLEDGE OF THIS DEVICE

The whole set
This device is composed of a tablet computer, main test cable and kinds of connectors.

The tablet computer

TECHNICAL PARAMETER

• Operation system: Android 5.1.1
• CPU: RK3128 Quad-Core， ARM Cortex A7@1.2Ghz
• Battery: 3800mA, rechargeable polymer lithium battery
• Extension memory card: 32G Micro SD (TF) card supported
• Memory capacity: 16GB
• LCD: 7.0 inches
• LCD resolution: 800*480
• Touch screen: Capacitive touch screen
• Wi-Fi: Supported
• Working temperature: -20℃~55℃（14℉~131℉）
• Storage temperature: -20℃~70℃（-4℉~158℉）
• Weight: about 1kg
• Dimension: 245*149*35 mm

ACCESSORY（Standard Configuration）

Main test cable Pack different main cables according to different configurations

OBD Connector
OBD I connector to connect the diagnosis port of non-OBD II vehicles. To choose the connector according to the vehicle brand and model.

Common connectors are as below:

Note: Different configuration accessories may have different options

FAQs of Ancel DP500