AstroAI AHET118GY Car Jump Starter Installation Guide
The AstroAI AHET118GY Car Jump Starter is a small but powerful emergency tool that can help drivers get their cars started when the battery dies. You can use this portable jump starter with a lot of different 12V vehicles, like cars, motorcycles, and even boats. A lot of the time, it comes with extras like an LED flashlight, USB ports for charging electronics, and advanced safety features to keep it from overcharging, short-circuiting, and reverse polarity. Because it is portable and can do many things, the AstroAI AHET118GY is not only an important tool for roadside emergencies, but it’s also useful for outdoor activities and meeting different power needs.
WARNING
- Contains small accessories which are a choking hazard for young children.
- Keep out of reach of children.
- The inflation hose will heat up during use, be mindful of the heat.
- Do not over-inflate the tire, high pressure may cause damage.
- Allow a 60-second interval between continuous operations to avoid overheating the product.
- Only use the included jumper clamps. Do not use the jumper clamps if the clamps or cables are damaged.
- Do not use the product in hot temperatures or high humidity.
- Store the product as instructed.
- Do not modify or disassemble the product.
- Keep the product away from flammable liquids and gases dust, and corrosive liquids.
- The jump-start function is only compatible with 12V vehicles.
- Ensure the blue plug is fully inserted into the socket, or it may burn.
- Ensure the starter’s battery life exceeds 60% before jumpstarting your car.
- Do not drop/toss the product. If the product is hit or damaged, it needs to be tested by a qualified battery technician.
- You may dispose of the lithium battery according to local guidelines when its service life has ended.
- Supervise the pump while it is inflating.
- Please check the preset value and unit before use.
- Do not aim the nozzle at people or any part of a human body.
- Extended use is not recommended! Please cool down the product for at least 10 minutes after 1 0 minutes of continuous use.
How to operate AstroAI AHET118GY
To operate the AstroAI AHET118GY Car Jump Starter, you typically need to follow these general steps. However, I strongly recommend consulting the user manual for specific instructions and safety guidelines provided by the manufacturer. Here’s a basic outline of how to use most car jump starters:
- Prepare the Jump Starter: Ensure that the jump starter is fully charged before use.
- Turn Off Your Vehicle: Make sure that your vehicle is turned off and the keys are removed from the ignition.
- Connect the Clamps: Attach the red clamp to the positive terminal of your car battery and the black clamp to a grounded metal surface away from the battery. It’s important to connect to a ground point rather than the negative terminal of the battery in some cases.
- Power On the Jump Starter: Turn on the AstroAI jump starter. Some models may have an indicator to show a successful connection or readiness to jump-start.
- Start Your Vehicle: Try to start your vehicle. It should crank and start if the battery is the issue. If it doesn’t start immediately, wait a few minutes and try again.
- Disconnect the Jump Starter: Once the vehicle starts, turn off the jump starter. Remove the black clamp first, followed by the red clamp.
- Recharge the Jump Starter: After use, recharge your jump starter to prepare it for the next use.
Remember, safety is crucial when dealing with car batteries and electrical systems. Wear protective gear, and avoid touching the clamps together or letting them touch other metal surfaces when they are connected to the battery. If you are unsure or uncomfortable with the process, it is advisable to seek assistance from someone experienced with car batteries and jump starters.
Car Jump Starter Uses
The AstroAI AHET118GY Car Jump Starter is primarily used for jump-starting vehicles like cars, motorcycles, and boats when their batteries are dead. Additionally, it serves as a portable power source, capable of charging electronic devices such as smartphones and tablets through its USB ports. Its built-in LED flashlight, with various modes including SOS and strobe, is useful in emergencies or low-light conditions. The device’s safety features also provide users with protection against common electrical hazards. These versatile uses make it a valuable tool for both emergency situations and everyday convenience.
Features
The AstroAI AHET118GY Car Jump Starter is a versatile and powerful device for vehicle emergencies. Key features include:
- Power Capacity and Peak Current: It has a robust power capacity, suitable for jump-starting cars, motorcycles, and boats.
- Charging Options: Offers multiple charging options such as USB, wall charger, and car charger.
- Additional Features: Equipped with a built-in flashlight and USB ports for charging electronic devices. It also includes safety protections like reverse polarity, over-current, and short-circuit protection.
- Performance: Efficient in starting vehicles, user-friendly design, and fast charging capabilities with long battery life.
- Portability and Durability: Compact and lightweight, made with high-quality materials for durability. Some models come with carrying cases or accessories for convenience.
- Safety Features: Includes reverse polarity protection and spark-proof technology, and meets stringent safety certifications like UL certification.
These features make the AstroAI AHET118GY a reliable and convenient tool for various vehicle-related emergencies.
Specifications
The AstroAI AHET118GY Car Jump Starter is characterized by its robust power capacity, suitable for jump-starting various vehicles, including cars, motorcycles, and boats. It offers versatile charging options through USB, wall charger, and car charger. The device features a built-in flashlight and additional USB ports for charging electronic devices. It also includes important safety protections like reverse polarity, over-current, and short-circuit protection. Additionally, it is compact, lightweight, and made with durable materials, making it portable and reliable for emergencies and everyday use. For more detailed specifications, please refer to the product manual or the manufacturer’s website.
FAQs of AstroAI AHET118GY
The AstroAI AHET118GY has a battery capacity of 20000mAh, making it capable of jump-starting most vehicles.
It can typically jump-start a car up to 20 times on a full charge, depending on the vehicle’s engine size and battery condition.
This jump starter is suitable for cars, motorcycles, boats, RVs, and light-duty trucks with gasoline engines up to 8.0L and diesel engines up to 6.5L.
It takes approximately 5-6 hours to fully charge the jump starter.
Yes, it can charge smartphones, tablets, and other USB devices via its USB ports.
Yes, it comes with a built-in LED flashlight with multiple modes including SOS and strobe.
While it’s designed for rugged use, it is not fully water-resistant and should be kept dry.
The jump starter has indicator lights that show the charging level, with all lights lit indicating a full charge.
It operates effectively in a wide range of temperatures, from -20°C to 60°C (-4°F to 140°F).
Store it in a cool, dry place and recharge it every three months to maintain the battery’s health.
It includes over-current, overload, over-voltage, and short-circuit protection.
Yes, it typically comes with a 1-year warranty, but it’s advisable to check the specific terms upon purchase.
It can hold its charge for up to 6-12 months when not in use, but it’s recommended to recharge every 3 months.
No, it’s designed for jump-starting and charging electronic devices, not for inflating tires.
It typically comes with jumper cables, a USB charging cable, and a carrying case.