AstroAI MF159 Jump Starter: Power Up Your Drive – User Manual

AstroAI MF159 Jump Starter: Power Up Your Drive – User Manual

The AstroAI MF159 Jump Starter is a strong, multifunctional tool made for vehicle emergencies, especially for jump-starting dead car batteries. It stands out because it can support a lot of different vehicles, like cars, motorcycles, and boats, and has a high power capacity. Along with different charging options, the MF159 has extra features like a built-in flashlight and USB ports for charging electronics. Its safety features, easy-to-use interface, and long life make it a reliable companion for drivers. It’s easy to carry because it’s small and light, making it a great choice for people who need a reliable solution for roadside emergencies.

How to operate AstroAI MF159

To operate the AstroAI MF159 Jump Starter, you should follow a general process similar to most car battery jump starters:

1. Ensure the jump starter is adequately charged.
2. Turn off all electronics in the vehicle.
3. Connect the positive (red) clamp to the positive terminal of the battery, and the negative (black) clamp to a grounded metal part of the vehicle.
4. Turn on the jump starter.
5. Try starting the vehicle.
6. Once the vehicle starts, turn off the jump starter.
7. Remove the clamps in reverse order (negative first, then positive).

WARNING

• Contains small accessories which are a choking hazard for young children. Keep out of reach of children.
• The inflation hose will heat up during use, be mindful of the heat.
• Do not overinflate the tire, high pressure may cause damage.
• Allow a 60-second interval between continuous operations to avoid overheating the product.
• Only use the included jumper clamps. Do not use the jumper clamps if the clamps or cables are damaged.
• Do not use the product in hot temperatures or high humidity. Store the product as instructed.
• Do not modify or disassemble the product.
• Keep the product away from flammable liquids and gases, dust, and corrosive liquids.
• The jump start function is only compatible with 12 V vehicles.
• Ensure the blue plug is fully inserted into the socket, or it may burn.
• Ensure the starter’s battery level exceeds 60% before attempting to jumpstart your car.
• Do not drop or toss the product. If the product is hit or damaged, it needs to be tested by a qualified battery technician.
• You may dispose of the lithium battery according to local guidelines when its service life has ended.
• Supervise the product while it is inflating.
• Please check the preset value and unit before use.
• Do not aim the nozzle at people or any part of a human body.
• Extended use is not recommended! Please cool down the product for at least 10 minutes after 10 minutes of continuous use.
• Do not store the product at temperatures above 70 °C/158 °F.
• Only charge this product at room temperatures between 32-113 ° F (0-45 °C).

AstroAI MF159 DIAGRAM 

1. Car Mode
2. Motorcycle Mode
3. Bicycle Mode
4. Basketball Mode
5. Battery Level
6. Units
7. Power Button
8. “+” Button
9. “-” Button
10. Light Button
11. Mode Button
12. Air Mattress Mode
13. Type-C Input Port
14. Output Port
15. LEO Light/SOS
16. Battery Clamp Port
17. Air Mattress Mode-Deflation Port
18. Tire Inflation Port
19. Air Mattress Mode-Inflation Port
20. Smart Battery Clamps
21. Charger
22. USB Charging Cable
23. Storage Box
24. 1-4 Air Mattress Nozzle
25. Air Hose
26. 2x Air Nozzles
27. Presta to Schrader Adapter
28. Needle Valve Adapter
29. Air Mattress Hose

PREPARATION

How to charge the product 

1. Connect the USB-C end of the USB charging cable to the charger.
2. Connect the USB-C end of the USB charging cable to the Type-C port of the product.

Note: The battery indicators will illuminate circularly while charging;
the illuminated indicators represent the current battery level. If all
four of the battery indicators are off, which means the charging is complete.

Ensure the pressure value is correct

To avoid overinflation, please confirm the maximum inflation pressure of the objects being inflated. Overinflating objects may cause damage and personal injuries.

Tires
The recommended tire pressure is usually noted on the tire’s sidewall. Tire pressure recommendations/maximums can also be found on the inside of the driver’s door.
Check your vehicle’s instructions/user manuals for information about the load-bearing capacity and recommended tire pressure.

Balls
The recommended pressure can be found on the air valve of soccer balls, basketballs, volleyballs, and most other balls.

Air Pressure Reference Table
Bicycles

INSTRUCTIONS

How to jumpstart 

1. Turn on the product and plug in the smart battery clamps.
   1. Illuminated red
   2. Cause: Low voltage
   3. Solution: Charge it
2. Connect the smart battery clamps to the vehicle’s battery.
   Illuminated red, buzzer long beeping
   1. Cause: Short circuit
   2. Solution: Check the circuit or try step 1
      Illuminated red, buzzer emitting a short beep sound Cause:
   3. Reversed polarities
   4. Solution: Reverse the clamps
3. Start your engine.
   Flashing red light
   1. Cause: Failed to jumpstart in 30s
   2. Solution: Remove the clamps, try step 1

Note

• A red light illuminating the smart battery clamps indicates the jump starter has a low battery level.
• Connect the red clamp to the battery’s positive terminal(+) and the black clamp to the battery’s negative terminal(-).

How to inflate tyres of AstroAI MF159

1. Turn on the product and connect the air hose to the product.
2. Choose the appropriate nozzle for your inflatable.
   Note: Firmly flip the small lever to ensure a secure connection.
3. Use the “Mode” Button to select inflation mode. Use the “+” & “-” buttons to adjust the pressure value.
4. Connect the other end of the air hose to the tire valve.
5. Press the Power Button to start inflating.
6. Disconnect the hose from the tire.
   Tip: The maximum pressure of the custom mode is 150 PSI, while the other four modes’ values are fixed to avoid damage or safety hazards.

• Car: 58 PSl/4 Bar
• Motorcycle: 51 PSl/3.5 Bar
• Bicycle: 150 PSl/10.3 Bar
• Basketball: 14 PSl/1 Bar

Note: The air hose will heat up during inflation; do not touch the air hose directly. Doing so may cause burns.

How to inflate/deflate air mattresses

1. Turn on the product. Connect the air mattress hose to the air mattress mode inflation/deflation port.
2. Choose a nozzle based on the items being inflated or deflated, horizon­tally align the hose and accessory nozzle, and twist them clockwise along the threads.
3. Press the “Mode” Button to choose the air mattress mode. Press the”+” & “-” buttons to adjust inflation/deflation time. The default time is 300 seconds.
4. Connect the air mattress hose to your air mattress (es).
5. Press the Power Button to start inflating/deflating.
6. Disconnect the hose from the air mattress.

Tip

1. Connect the air hose to the air mattress mode inflation port for inflation or the air mattress mode deflation port for deflation.
2. The default inflation time is 300s, press once to adjust the time by 30 seconds.
3. Let the product cool down for 15 minutes after 10 minutes of continuous operation.

Power bank function

1. Insert the USB charging cable into the USB output port of the product.
2. Connect the other end of the USB charging cable to the device being charged.

LED illumination function

Press and hold the Light Button for 2 seconds to turn on the illumination function. Press the Light Button again to choose between Flashlight mode, Strobe mode, SOS mode, and OFF.

MAINTENANCE

To maximize the battery’s performance and service life, please charge the product when its battery level is lower than 75%. Please fully charge the product if it is going to be idle for a long time. Charge it every three months to extend its service life.

SPECIFICATIONS

• Model: MF159
• Capacity: 54760 mWh (54.76 Wh)
• Jumpstart Current: 800 A (15) 500 A (35)
• Peak Current: 2500 A
• Tire inflator Pressure: 3-150 PSI, 0.2-10.3 Bar
• Tire inflator Accuracy: ±1 PSI
• Inflation Speed: 220 L/Min
• USB Output: USB-A 5 V≅2 A
• Type-C Input: Maximum PD 20 W
• Operation Temperature: -4~ 1 22 °F; -20~50 °C
• Charge Temperature: 14~113 °F; -10~45 °C
• Time to Fully Charge: Approximately 4 hours for 20 W, 3 hours for 30W

PACKAGE INCLUDES

• Jump Starter with Air Compressor X 1
• Air Nozzle X 1
• Presta-Schrader Adapter X 1
• Air Hose X 1
• 1-4 Air Mattress Nozzle X 1
• USB Charging Cable X 1
• Smart Battery Clamps X 1
• Charger X 1
• Air Mattress Hose X 1
• Storage Box X 1
• Needle Valve Adapter X 2
• User Manual X 1

WARRANTY PERIOD

2-Year Limited Warranty from AstroAI
Each AstroAl Jump Starter with Air Compressor will be free from
defects in material and craftsmanship. This warranty does not cover damage from neglect, misuse, contamination, alteration, accident, or abnormal conditions of operation or handling. This warranty covers the original purchaser only and is not transferable.

FAQs for AstroAI MF159