BOHISEN Dual Dash Cam User Manual

BOHISEN Dual Dash Cam

Take thorough notes while driving with the BOHISEN Dual Dash Cam. An indispensable tool for any driver’s safety and peace of mind, this cutting-edge system has dual wide-angle cameras for front and back coverage, guaranteeing high-quality film in full HD, day or night.

BOHISEN Dual Overview

1. The HDMI Interface
2. The USB Interface
3. The Tf Card Slot
4. Key
5. Menu
6. Key
7. The Ok Button
8. Mode Button
9. A Key Lock Key
10. Power Button
11. Display
12. Card Slot
13. Mic
14. Reset Button
15. Camera
16. The Speaker Hole
17. In-car Cameras (optional)

Keys function description

1. After recording the camera interface
2. 5 v de power supply interface
3. TF memory card slot, please according to the prompt right direction installation.
4. In the menu mode and file browsing mode, for page-turning capabilities. In standby or video mode, short-press the key switch after the pictures are shown.
5. In standby and take photos, playback mode, short press enter the menu Settings.
6. Menu mode and file browsing mode, for the next page function. In standby mode or video mode, press the button to open and close the recording.
7. In the recorder interface, short press the OK button to start/stop video recording. In other work set the interface to confirm key.
8. In standby mode, short press the M key can choose to switch to the function interface.
9. In video mode, short press a key lock to protect the video. (protect video from automatic cycle).
10. Long press on the on/off the phone; Under the state of standby or video short press for open/close the screen backlight.
11. 3.0 inches HD display
12. Mounting bracket
13. The recording
14. System to restart the reset button
15. Wide Angle lens
16. The speaker installation location
17. In-car cameras (optional)

Matters needing attention

1. insert the memory card
   Please according to the equipment on the memory card notch tip in the right direction to insert a memory card, according to the memory card until a click-sound, insert is in place so far. Due to the video recorder stored on the card of high running speed, pay attention to the storage card must be the card (CLASS10 above).
   Note: the new card for the first time use, must be in the native format.
2. remove the memory card: according to the memory card, a pop-up slot. Note: If the device is on, press don’t remove or insert the memory card, in order to avoid damage to the deposit Storage card or missing files.
3. installed in the car windscreen
   Will equipment support of 3 m gummed paper back to tear or chuck (optional), fixed on the front windshield
   On the can.
4. recorder installation
   Connect the power supply
   Basic original charger, please use the boot device as well as the built­in battery. Connect one end of the car charger to the USB interface equipment, on the other side of the car charger into the car cigarette lighter port, and the car engine once a device is automatically switched on.

Note: the wiring can be on-board charger extension along the car windshield at the top of the decoration Plate hidden installation, as shown in the above.

A key to manually lock the document function

In video mode press the lock key, which can be a key to lock the current video file, has locked files will not be covered, nor will locked files deleted (means only on a vehicle travelling data recorder file delete operation, if you choose to format the card, the card within all files contain lock file will be deleted.

Automatic lock document function
The machine built-in three-axis force sensor chip, and vehicles in traffic accidents occur in the process of driving, this function automatically when a vehicle is impacted the current video video locking is protected, Providing strong evidence for the accident investigation.

Warm prompt
Lock time is according to the video in the video recorder Settings menu Settings Associated, loop video menu “1/3/5” three gear, such as Fruit set the video time to 1 minute, then the lock time video for 1 minute.

AVin input function
Native support AVin video image input, matches after the shot, when using the machine support, according to the picture in picture, automatically switches to the reverse shot images and automatically after the full screen.

Warm prompt
Shot after reverse trigger line, the red line by reversing light anode, black line by reversing lamp cathode.

Recorder initial setup

Set the date and time

1. Standby mode, press the “M” to enter the Settings menu;
2. Through the “key” operation to choose the time setting, press the “OK ” button to confirm the Settings
3. By pressing the “key” to carry on the numerical control, after the completion date and time Settings, select confirm and then press the “OK button to save the date/time Settings;

Recorder camera operation

1. When the car engine and equipment are automatically turned on and start recording. When the engine will automatically stop recording.
2. The recorder in video mode can manually press the “OK” key to pause or to start the video.

Video playback operation

1. Standby mode, press the “mode” twice, into the video preview interface;
2. Press the “key” select play video, and press the “OK” key to playback video;
3. For video playback mode, press the “key switch” to play the video;
4. Playback mode, press the “M” into the playback menu Settings, lock/unlock protection can be deleted or video;

Parking monitoring function

This machine has the function of parking monitoring, parking on the monitoring function, when your car “crashes”, the recorder is automatically turned on and the video, recorded at the time of the image, is escorted to your car.

A key mute function
In standby mode or video mode, press the button to open or close the recording.

Special function

1. After reversing visual
   First, you must connect the car charger good recorder, and stay after the camera line connection backlight anode. Car starts, the device will automatically start the video state, in any state, if there is a reverse, a reversing image will be shown. After reversing visual machine automatically returns to video mode. (There are special vehicles reversing the control line to the cathode that should not use this feature)
2. RESET
   If in use process, the machine is abnormal or crashes, can the tiny needle touch through a small aperture in the shell system RESET operation according to the RESET button on the machine?
   1. Front of the camera
      Acute manual regulation within 30 degrees, camera Angle can be adjusted according to models.
   2. The car camera
      Manually adjusted 360 degrees, the side, right side, and the internal camera. Bring light night vision effect (with reverse after a choice).

Dual Dash Cam Specification Guide

Feature	Specification
Product Name	High-definition camera
Product Features	1296P, 12M, 3 inches screen
Video	Taking pictures
Screen Size	3 inches
Lens	Grade A+ high resolution wide angle lens
Language	Chinese, English + 10 other languages
Video File Format	AVI
Image File Format	JPG
Video Resolution	1296SHD / 14401080 / 1280720
Colour Effect	Standard
Continuous Loop Video	Seamless loop video, no leakage seconds
Accessory Switch Machine	Support (car idling lighter boot, shutdown)
After Recording the Lens	After the HD recording
Date	In (date) (month) (year) – specific date not provided
Lens Aperture	F2.0
Night Vision Function	Support
Motion Detecting Function	Support
Memory Card	TF card (support 8 GB – 64 GB)
Reversing Image	Support
Microphone	Support
Built-in Audio	Support
Shrink the Video	Does not support
Current Frequency	50 Hz / 60 Hz
USB Function	The power interface
Power Supply	5V
Battery	Built-in battery
Parking Monitoring	Support
Recorder	Support

Difficult to rule out Dual Dash Cam

Under normal operating conditions, such as product abnormal problems, please refer to the following solution:

• Unable to boot
  Check the line installation is correct, Or remove the memory card to boot.
• The camera automatically stops when the camera, does not cycle
  Due to high definition, video data is huge, likely because the memory card read-write speed can’t keep up. Please use the TF card such as a C10 card at a high speed.
• The film is not clear
  Please check the lens for stolen goods and fingerprints. Please clean the surface of the lens before filming, keep the lens clean and tidy.
• Clap a film sometimes affects good and bad.
  Camera effect has a lot to do with shooting the light environment, such as the strength of the light, down light, the light can cause such as shooting the video file to different effects.
• In the image interference stripes.
  This is due to setting the wrong “light source frequency under the fluorescent lamp, produced by the domestic frequency is 50 Hz.

FAQs of BOHISEN Dual