Boss Audio Systems PV3700 POWER AMPLIFIERS User Manual

Boss Audio Systems PV3700 POWER AMPLIFIERS User Manual

Any car audio system can benefit from the Boss Audio Systems PV3700 Power Amplifier, which is both powerful and flexible. This amplifier is made to improve your in-car audio experience by giving you more power and clarity. It’s built to last and has high-tech features that make sure your music sounds great whether you’re driving down the highway or sitting in your favorite spot. For audiophiles who want to take their car audio to the next level, the PV3700 is the best choice. It’s a powerhouse that lets you enjoy your favorite songs with unmatched clarity and intensity.

How to Operate Audio Systems Boss PV3700 

Operating the Boss Audio Systems PV3700 Power Amplifier requires attention to detail and proper setup to ensure optimal performance. Here are the basic steps to operate the amplifier:

1. Power Connection:

• Ensure that your vehicle’s ignition is turned off before starting the installation.
• Connect the amplifier’s power wire (usually red) to the positive terminal of the car battery.
• Connect the amplifier’s ground wire (usually black) to a clean, metal part of the vehicle’s chassis to establish a ground connection.
• Connect the remote turn-on wire (usually blue) to a switched 12V power source, such as the remote turn-on lead from your head unit.

2. Speaker Connections:

• Connect your car speakers to the amplifier’s speaker outputs using appropriate speaker wires.
• Match the positive and negative terminals on the amplifier to those on your speakers for correct polarity.

3. RCA Inputs:

• Connect the RCA cables from your car stereo head unit’s preamp outputs to the amplifier’s RCA input jacks. Ensure that you use the correct left and right channels.

4. Adjust Gain and Crossover Settings:

• Set the amplifier’s gain control to a low level initially.
• Adjust the crossover settings on the amplifier, if available, to match your speaker and subwoofer specifications.
• Gradually increase the gain until you achieve the desired volume without distortion.

5. Power On the Amplifier:

• Turn on your vehicle’s ignition.
• The amplifier should power on automatically if you connect the remote turn-on wire correctly. If not, turn on the amplifier manually.

6. Test the Sound:

• Play music through your car stereo system and listen for clarity and distortion.
• Adjust the gain control on the amplifier as needed to achieve the desired volume and sound quality.

7. Fine-Tune the Settings:

• Depending on your preferences and the type of music you listen to, you may need to fine-tune the amplifier’s settings.
• Make adjustments to the gain, crossover frequency, and other settings to optimize the sound quality.

8. Ensure Proper Cooling:

• Place the amplifier in a well-ventilated location to prevent overheating.
• Keep the amplifier away from direct sunlight and sources of heat.

9. Regular Maintenance:

• Periodically check the connections to ensure they are secure.
• Monitor the amplifier’s temperature during extended use to prevent overheating.

10. Troubleshooting: – If you encounter any issues, refer to the amplifier’s user manual for troubleshooting guidance or consult a professional installer.

Please note that the specific setup and operation of the Boss Audio Systems PV3700 Power Amplifier may vary depending on your car audio system and the amplifier model. Always refer to the amplifier’s user manual for detailed instructions and refer to the user manual of your head unit for guidance on adjusting audio settings.

Uses

The Boss Audio Systems PV3700 Power Amplifier is a versatile and high-performance component that serves several important uses in a car audio system:

1. Amplify Audio Signals: The primary function of the PV3700 is to amplify low-level audio signals received from your car stereo’s head unit. This amplification increases the power of the audio signal to drive your car speakers and subwoofers effectively.
2. Enhanced Audio Quality: By providing clean and powerful amplification, the PV3700 can significantly improve the overall audio quality of your car audio system. It ensures that music and audio are reproduced with greater clarity, detail, and impact.
3. Drive Multiple Speakers: This amplifier is typically a multi-channel unit, allowing you to power multiple speakers in your car. It can drive front and rear speakers, as well as a subwoofer, creating a well-balanced and immersive audio experience.
4. Custom Sound Tuning: The PV3700 often features adjustable settings such as gain, crossover frequency, and equalization controls. These settings allow you to fine-tune the audio output to match your preferences and optimize the sound for different music genres.
5. Support for Subwoofers: If you have a subwoofer in your car audio system, the PV3700 can provide the necessary power to drive it effectively. This ensures that you can enjoy deep bass and low-frequency effects in your music.
6. Volume Control: The amplifier allows you to increase the volume of your car audio system to higher levels without distortion, making it suitable for those who enjoy listening to music at louder volumes.
7. Flexibility in Speaker Selection: With the PV3700, you have flexibility in choosing the speakers and subwoofers that best suit your preferences and requirements. You can select speakers with various power handling capabilities, allowing you to create a customized audio setup.
8. Improved Soundstage: The amplifier can help create a more dynamic and immersive soundstage inside your car. This is especially important for car audio enthusiasts who seek a high-quality listening experience.
9. Equalization Control: Many amplifiers come with built-in equalizer controls that allow you to adjust the balance of frequencies (e.g., bass, midrange, treble) to achieve the desired tonal balance.
10. Enhanced Bass Response: For those who enjoy deep bass, the PV3700 can significantly enhance the bass response, delivering powerful and impactful low-frequency sounds.
11. Compatibility with OEM Systems: The amplifier can be integrated into factory or aftermarket car audio systems, allowing you to upgrade your audio without replacing the entire system.
12. Improved Clarity at High Volumes: With an amplifier like the PV3700, you can achieve clear and distortion-free audio even when playing music at high volumes, which can be especially beneficial for music enthusiasts.

In summary, the Boss Audio Systems PV3700 Power Amplifier is an essential component of a car audio system, enhancing audio quality, power, and customization options. It enables you to create a more immersive and satisfying listening experience while driving.

Specifications

The Boss Audio Systems PV3700 Power Amplifier is a powerful and feature-rich amplifier designed to enhance the audio experience in your car. Here are the specifications of the PV3700:

1. Power Output:
   • Max Power Output: 3700 Watts (Max Bridged Power @ 4 Ohms)
   • RMS Power Output:
     • 185 Watts x 2 (2 Ohms)
     • 93 Watts x 4 (4 Ohms)
     • 370 Watts x 1 (4 Ohms, Bridged)
2. Number of Channels: 4-Channel (Bridgeable to 2-Channel)
3. Signal-to-Noise Ratio (SNR): >90 dB
4. Total Harmonic Distortion (THD): <0.01%
5. Frequency Response: 9 Hz – 50 kHz
6. Input Sensitivity: Variable level inputs, switchable between 100mV-2V or 2V-8V for RCA inputs
7. Crossover Control:
   • Variable High-Pass Crossover: 50 Hz – 250 Hz
   • Variable Low-Pass Crossover: 50 Hz – 250 Hz
   • Switchable Bass Boost: 0-18 dB
8. Bass Remote Control: Included (Remote subwoofer level control)
9. Protection Circuitry:
   • Thermal Overload and Short Protection
   • MOSFET Power Supply
10. Dimensions (W x L x H): 10-7/16″ x 13-3/4″ x 2-1/4″ (263mm x 350mm x 56mm)

Key Features

1. High Power Output: The PV3700 delivers a maximum power output of 3700 watts when bridged at 4 ohms, ensuring ample power to drive speakers and subwoofers.
2. Versatile Configuration: This amplifier is bridgeable, allowing you to configure it as a 2-channel or 4-channel amplifier based on your system’s requirements.
3. Low Distortion: With a low THD of less than 0.01% and a high SNR of over 90 dB, the PV3700 maintains audio clarity and minimizes distortion.
4. Adjustable Crossovers: The amplifier features variable high-pass and low-pass crossovers, enabling you to fine-tune the frequency response for your speakers and subwoofers.
5. Bass Boost Control: You can enhance the bass response with the switchable bass boost, providing up to 18 dB of bass reinforcement.
6. Remote Subwoofer Control: The included remote control allows you to adjust the subwoofer level from the driver’s seat for convenient on-the-fly adjustments.
7. Protection Circuitry: The PV3700 includes protection features such as thermal overload and short-circuit protection, ensuring the amplifier’s longevity and safety.
8. MOSFET Power Supply: MOSFET transistors in the power supply contribute to the amplifier’s efficient and reliable performance.
9. Frequency Response: The amplifier offers a broad frequency response range, allowing it to reproduce a wide spectrum of audio frequencies accurately.
10. Input Sensitivity: Variable input sensitivity settings accommodate different audio sources and signal levels.
11. Compact Design: The compact and sleek design of the amplifier makes it easier to install and fit into various car audio setups.
12. Durable Construction: Built to withstand the demands of a car audio environment, the PV3700 features durable construction and materials.

The Boss Audio Systems PV3700 Power Amplifier is designed to provide high-quality, powerful, and customizable amplification for your car audio system. Its versatile features and robust performance make it an excellent choice for audio enthusiasts looking to enhance their in-car sound experience.

FAQs Of Boss PV3700