COOAU M26-US-NEW FHD Dash Cam User Manual
The COOAU M26-US-NEW FHD Dash Cam is a high-tech driving companion that is made to make the roads safer and record your entire trip. This model can record videos in Full HD (1080p), so you can get clear, detailed footage of accidents, road conditions, and scenic drives. It takes pictures of a wide area because it has a wide-angle lens, which reduces the number of blind spots and provides proof in case of accidents or disputes. The dash cam also has night vision, which lets you record in low light. It also has a lot of safety features, like motion detection, loop recording, and a G-sensor that saves footage automatically when the car is hit or shook suddenly. The COOAU M26-US-NEW FHD Dash Cam is a must-have for drivers who want to feel safe and secure on the road. It’s small and easy to set up.
Package Contents
- COOAU M26 Dash Cam x1
- 3M Adhesive Bracket x1 (Mounted On The Dash Cam)
- 11.81ft USB Data Cable x1
- M26 Dash Cam User Manual x1
- Car Charger x1
- Electrostatic Sticker x 2
- Spare 3M Adhesive x 2 (Stand Not Included)
Camera Overview
Product Installation
SD Card Installation
- Insert SD Card
Push in the Micro SD card as shown until it clicks. - Removing the Micro SD card
Press the Miera SD card inward to exit from the slot. - Memory Card Use
- Please make sure the insertion direction of the Micro SD card is, the incorrect insertion direction may damage the camera and Micro SD card.
- Please use a high-speed Micro SD card that conforms to SDHC specifications; high-speed Micro SD cards will have the Class 10 logo.
- To ensure your experience, we recommend you format the SD card thoroughly before you start using it officially. The steps for thorough formatting: use the card reader and format the SD card on the computer (you can repeat the formatting several times) insert the SD card into the M26 dash cam and format it again on the APP page.
- Please know that the SD card is a consumable product with a different service life concerning the number of data read and written. Recommend that you replace the SD card regularly according to the actual use.
- To extend the service life of the SD card, it is recommended that you format the SD card once every two weeks. It is not recommended that you plug and unplug the SD card frequently. which will cause damage to the SD card.
- Please make sure the SD card is inserted and removed when the power is turned off.
- It is recommended to use a memory card of 16GB-128GB.
Dash Cam Installation
- Use a clean soft cloth to wipe the location where it needs to be installed to ensure that there is no ail and dirt on the car window, etc.
- Stick the electrostatic sticker at the location near the top of the car windshield.
- Take out the dash cam, and insert the SD card and USB cable.
- Peel off the 3M adhesive film on the stand, and paste the dash cam on the dashed frame position of the electrostatic sticker.
- Rotate the body part of the dash cam to adjust the angle of the camera. It is recommended to bring the lens slightly down to ensure that the camera view is parallel to the horizontal ground. (Recommended: a ground/sky ratio of approximately 6:4.)
- Plug the other end of the USB cable into the car charger, and plug the car charger into the cigarette lighter.)
- After the dash cam is installed and connected to the power
supply, the recorder automatically turns on and records video and the work indicator lights up, indicating that it has entered the normal working state.
LED Indicator Description
Icon Function Introduction
Logger Reboot
When the camera is down or inoperable during operation, use the card pin to insert it into the restart hole and press until it clicks. The camera will restart. (Card pin not included)
APP Connection
- Scan the APP QR code to download the “Ficam” APP.
- Make sure the dash cam is normally powered on, open the Ficam APP, and click “connect DVR” on the device page of the APP. the page will jump to the Wi-Fi setting interface of your cell phone. Please select the Wi-Fi name “COOAU-M26-XXXX” in the Wi-Fi list to connect (default password: 12345678).
Main Function Description
Collision Detection
- Turn on collision sensitivity (off, low, medium, high switchable)
- The default is Medium. The high sensitivity will cause many
unnecessary video clips to be saved as emergency files, thus
affecting the normal recording. - When vibration or collision detection is triggered during driving,
dash cam will lock the current video into the emergency folder,
the locked file will not be overwritten, so important events will be
saved and can be used as evidence. - The locked files will be in the emergency directory, which will
automatically overwrite the earliest locked files when it is full.
When the “Emergency Files” folder accumulates to 40% of the
card capacity, the camera will overwrite the oldest event video.
Attention
- Please transfer important videos to your PC or other storage
location (e.g. external hard drive) regularly. - To maintain good read/write performance, the micro SD card
should be formatted every 1-2 weeks.
Monitoring Mode
Motion Detection (Default: OFF)
Once motion detection detects any movement within 2.5
meters in front of the camera, the camera will automatically
record a 1-minute video clip and save it in the “General Video”
folder. If there is no motion within 5 minutes, the dash cam will
automatically turn off.
Attention
- For this function to work, you need to keep your
car recorder in an energized state. You should preferably
connect your recorder to an external power source. - Remember not to turn on the motion detection when driving,
otherwise, it will affect the loop recording.
Parking Recording (Default: OFF)
- Parking mode is not triggered when the camera is not connected
to power. If you need to use this function, we recommend you
use a buck cable to connect to the car battery. - When the camera detects a collision or vibration, it will
automatically power on and record a 30-second lockout video. If
continuous vibration is detected within 5 minutes, the camera will
loop the video, otherwise it will automatically shut down.
Attention: To use parking mode, you must connect the camera to the
car battery using a Micro USB connector (step-down cable)
hardware kit. The output current of the hardware kit should
be 5V/2.5A or 5V/2A.
Seamless Recording
There will be no time interval between each two consecutive
recorded videos. If the loop recording length is selected as
1 minute, the recorded video periods will be 06:00:00-06:01:00,
06:01:00-06:02:00, and 06:02:00-06:03:00, for example.
Intelligent Voice Reminder
This camera supports the following intelligent voice reminder
functions.
- Please insert the memory card.
- Please format the memory card.
- Please replace the memory card.
- Emergency files will be full, please delete locked files or save them
to another device. - If you have been driving for 1/2/4 hour (s), please take a rest.
- Video locked.
Download and Share Videos
- View Files on the SD Card
Here you can view all the contents saved on the SD card. - Save Files from SD Card to APP
Select the picture or video file you want to share on the SD card
file, click download, and the file can be saved to the APP. - View and Share APP Files
Here you can share images or 15-second video clips.- Crop Video (15s)
- Edit Video (15s)
- Share Video (15s)
- Save App Files to Your Phone Album
- Share Videos from Your Phone Album
You can find and share the whole video in your phone album.
Attention: The Wi-Fi of the car recorder has no networking function if you need to access the Internet, please switch the network.
Warranties
Warranty
The COOAU M26 Dash Cam has a full 12-month warranty. You
can extend the warranty period to 24 months if you contact our
official email address for registration.
Customer Service
If you have any questions about the product, please feel free to
contact us through Amazon or email us at
support-us@cooau.com and we will usually respond within 12-24
hours.
Your opinion is important
COOAU is firmly committed to continually improving our
products, services, and user experience. If you have any
ideas on how we can do better, we welcome your constructive
feedback and suggestions.
Thank you for choosing COOAU!
FAQs of COOAU M26-US-NEW
Secure the dash cam on your windshield or dashboard using the suction cup or adhesive mount provided. Connect it to a power source in your car, typically via the cigarette lighter or a USB port, using the included power cable.
It supports MicroSD cards, preferably class 10 or higher, up to a certain capacity (usually 32GB or 64GB). Check the user manual for the maximum supported size.
Insert the MicroSD card into the dash cam, access the menu settings, and find the format option. Confirm the action to format the card, preparing it for use.
Yes, if it has a parking mode feature, it can record when motion is detected in front of the camera, or if the G-sensor detects an impact. This may require a constant power supply, achievable through hardwiring to the car’s battery.
Navigate through the device’s menu to find the date and time settings. Use the buttons to set the current date and time accurately.
Loop recording allows the dash cam to continuously record video in short segments (e.g., 1, 3, or 5 minutes). When the memory card is full, it will automatically overwrite the oldest files.
You can view footage directly on the dash cam’s display (if available) or by removing the MicroSD card and viewing the files on a computer.
Check the power connection to ensure it’s properly connected to your car’s power source. Also, verify that the car’s power outlet or USB port is functioning.
Ensure night mode is enabled if available. Clean the windshield and the camera lens to remove any obstructions or smudges that can impair video quality.
Check if the MicroSD card is properly inserted and has sufficient space. If it’s full, ensure loop recording is enabled or manually format the card to free up space.
Access the device settings through the menu and look for the motion detection option. Enable it and adjust the sensitivity as desired.
Clean the lens with a soft, dry cloth. Ensure the windshield is clean on both the inside and outside. Adjust the camera angle if necessary to avoid direct sunlight or reflections that could cause glare.
Yes, most dash cams have a feature to capture still images. Check your device’s manual to see how to switch to photo mode and take pictures.
The G-sensor detects sudden movements, such as hard braking or a collision, and automatically locks and saves the current video segment to prevent it from being overwritten, preserving evidence of the incident.
It’s recommended to format the MicroSD card in the dash cam every month to ensure optimal performance and reliability of data recording.