How To Inflate Slime 40026 Tire Inflator User Manual
Specifically intended to fulfill the inflation requirements of cars, SUVs, and 4×4 vehicles, the Slime 40026 Tire Inflator is a multipurpose and potent portable air compressor. Its heavy-duty design and cutting-edge features guarantee rapid and effective tire inflation, making it a useful tool for routine maintenance as well as emergency scenarios.
Two minutes is all it takes for a car tire to be inflated with the powerful 2X Pro Power Slime 40026 tire inflator. It is silent and features a thermal break feature to keep it from overheating. It also has alligator clips, a long hose, an LED light, and an analog 150 psi dial gauge.
Description
Key Features
Two-Pro Power
A dual-power motor that produces remarkable inflation capabilities powers the Slime 40026. This guarantees quick and effective tire inflation, especially for bigger cars like 4x4s and SUVs.
150 psi analog Gauge Dial
Up to 150 psi of precise air pressure monitoring and control are possible thanks to the integrated analog gauge. With this accuracy, you can keep your tires inflated to the recommended level for maximum safety and fuel economy.
Extended Hose
With no trouble at all, the supplied hose can easily reach all four tires on your car. Inflating tires on bigger cars, trailers, or cars in small areas is made easier by this capability.
LED Lighting
A bonus is the embedded LED light, which comes in handy when doing tire maintenance at night or in poor light. It guarantees that you can operate the inflator efficiently in any lighting situation.
Clips of Alligators
The alligator clips are made to make connecting to your car’s battery simple and safe. Even in remote or off-road conditions, its direct power supply guarantees steady and dependable operation.
Two-Minute Inflation
With its remarkable inflation speed, the Slime 40026 can inflate a typical automobile tire in under two minutes. You can rapidly resume driving and reduce downtime thanks to this quick inflation.
CAUTION
- HOT DO NOT HOLD IN HAND WHILE OPERATING
- PLACE THE INFLATOR ON A HARD, CLEAN SURFACE.
- DO NOT run the vehicle while the inflator is operating. You may need to be in an “accessory” or “on” position. Please make sure the emergency brake is set and the car is in the park. Always ensure the air hose chuck touches the core of the valve stem for proper inflation.
- DO NOT use the inflator continuously for more than 10 minutes. Allow the unit to cool for approximately 25 minutes between uses. Do not leave the inflator unattended.
- ALWAYS use a pressure gauge to check tire pressure. DO NOT overinflate.
- Soft inflatables (i.e. rafts, balls, etc.) may not have recommended pressure markings. Be careful not to inflate items beyond their capacity.
- While operating, never block the inflator input or output.
- Keep the inflator out of reach of children.
- For use with 12-volt DC power outlets rated 15 amps or higher. Do not use older 8-amp cigarette lighter receptacles.
HOW TO INFLATE TIRES
- Attach twist-connect air fitting to the inflator, then screw the opposite end connector onto the tire’s valve stem
- Attach battery clips to the battery, positive side first.
- Switch the inflator “ON”, and inflate the tire to the manufacturer’s recommended air pressure. When proper pressure is reached, turn off the inflator and disconnect the power cord, ground side first.
Frequently Asked Questions
The Slime 40026 Tire Inflator is a portable, heavy-duty air compressor designed for inflating tires on cars, SUVs, and 4×4 vehicles.
It can be powered directly from your vehicle’s battery using the included alligator clips.
The Slime 40026 can inflate up to a maximum pressure of 150 psi.
Yes, it’s designed to handle the tire inflation needs of 4×4 vehicles.
The analog gauge allows you to monitor and adjust the air pressure accurately while inflating your tires.
The Slime 40026 comes with a long hose that is designed to reach all four tires of your vehicle comfortably.
Yes, it features an integrated LED light for added convenience and visibility in low-light conditions.
While primarily designed for vehicle tires, it can potentially be used for other inflatables with compatible valve fittings.
Yes, its compact design makes it easy to store in your vehicle’s trunk or storage compartment.
Regular maintenance typically involves keeping the unit clean and checking for any loose connections or damage.
Yes, the Slime 40026 is a valuable tool for roadside emergencies, as it can quickly inflate a flat tire and get you back on the road.
It’s designed for heavy-duty use, but it’s advisable to follow the manufacturer’s guidelines for duty cycles to prevent overheating.
It typically works with Schrader valves found on most cars and bikes. Adapters may be needed for Presta valves.
It features a built-in thermal overload protector to prevent overheating and ensure safety during operation.