How To Install eRapta AY7 Front Rear View Car Backup Camera Installation Manual
The eRapta AY7 Front Rear View Car Backup Camera is an advanced automotive accessory designed to enhance safety and convenience while driving. This innovative device is specifically designed to provide a clear and reliable view of both the front and rear of your vehicle, helping you navigate tight parking spaces, avoid obstacles, and improve overall road safety.
What’s In the Box?
Make sure your package includes the following listed items completely. It would be better if you wrote down the order number from Amazon, including photos of the damaged or missing part in your email so that we can handle the problem much more quickly.
Key features
The eRapta AY7 Front Rear View Car Backup Camera include its high-resolution camera with night vision capability, which ensures that you can see even in low-light conditions or at night. The camera offers a wide viewing angle to minimize blind spots and increase your awareness of your surroundings, making it easier to avoid accidents and manoeuvre your vehicle with confidence.
This car backup camera also comes equipped with a user-friendly display monitor, which can be easily installed in your vehicle’s dashboard or rearview mirror. The monitor provides a real-time feed from the camera, allowing you to switch between front and rear views effortlessly. Additionally, the camera is designed to be waterproof and durable, ensuring it can withstand various weather conditions and the rigours of daily driving.
Overall, the eRapta AY7 Front Rear View Car Backup Camera is a valuable addition to any vehicle, providing drivers with enhanced visibility and safety. Whether you’re parking in a crowded urban area or simply want to improve your driving experience, this backup camera can help you navigate with greater ease and peace of mind.
How To Install
Installing the eRapta AY7 Front Rear View Car Backup Camera may vary slightly depending on your specific vehicle model, but here are the general steps to guide you through the installation process:
Tools and Materials You’ll Need
- eRapta AY7 Front Rear View Car Backup Camera kit (includes camera, monitor, and wiring)
- Screwdrivers (Phillips and flathead)
- Wire stripper and crimping tool
- Electrical tape or heat shrink tubing
- Multimeter (for testing electrical connections)
- Mounting brackets and screws (if not included in the kit)
- Power drill (if required)
Installation Steps
Choose Camera Placement
Decide where you want to mount the camera on the rear of your vehicle. The camera should have a clear view of the area behind your car. Common locations include just above the license plate or on the rear bumper.
Mount the Camera
Use the mounting brackets and screws provided in the kit or suitable hardware to securely attach the camera to your chosen location. Make sure it’s level and properly aligned.
Run Camera Wiring
Route the camera’s wiring from the rear to the front of the vehicle. You may need to remove interior panels, trim, or carpet to conceal the wiring. Ensure the wiring is protected and secured along its path.
Connect Camera to Monitor
Connect the camera’s video cable to the video input on the monitor. The connectors are typically colour-coded (yellow for video).
Connect Power Wires
Locate a suitable power source for the camera. This should be a 12V power supply that activates when you put your vehicle in reverse (usually the reverse light circuit).
Connect the camera’s power cable to the 12V power source. You may need to use a multimeter to verify the correct wires if you’re unsure.
Connect the camera’s ground wire to a clean, unpainted metal surface on the vehicle’s frame.
Connect the Monitor
Connect the monitor’s power cable to a 12V power source, which is typically the vehicle’s accessory power or the ignition switch.
Connect the monitor’s ground wire to a suitable ground point.
Secure and Test Connections
Use electrical tape or heat shrink tubing to secure and insulate all connections.
Test the camera and monitor by putting your vehicle in reverse. The camera feed should appear on the monitor when the reverse gear is engaged.
Secure Wiring
Secure any loose wiring with cable ties or clips to prevent them from interfering with other vehicle components.
Mount the Monitor
Install the monitor on your vehicle’s dashboard, rearview mirror, or another suitable location. Use the provided mounting hardware or adhesive to secure it in place.
Adjust the Camera
Adjust the camera angle to ensure the view is optimal and provides you with a clear image of the rear of your vehicle.
Final Checks
Double-check all connections and wiring to ensure everything is secure and functioning correctly.
Reassemble any interior panels or trim that were removed during the installation.
Warranty
eRapta offers a full 24-month warranty and replacement policy. We also provide lifetime technical support to ensure that you enjoy your modern backup camera for many years to come. To obtain warranty support, or if you are not satisfied in any way, or haveany issues with your purchase, please contact us first for help, instead of return or negative content. We promise that you will receive the best service from us, and we will try our best to help you until your problem is solved.
Frequently Asked Questions
Installing a backup camera is simple, and if you’re even slightly handy, you can do it yourself. Although every car is a little bit different, installing a backup camera is generally the same regardless of the type of vehicle you drive.
For larger cars like SUVs, Jeeps, and hatchbacks, this mount is perfect. The camera ought to be installed at the top of the hatch on larger cars like this. The camera on smaller cars should be mounted beneath the casing of the license plate light.
Yes, you may install them in any car that does not already have them. For backup cameras that don’t require wiring, consider going wireless.
However, reversing cameras from aftermarket manufacturers are much less expensive and may be put on any kind of vehicle. The best examples that are available for purchase are the ones that will guarantee that you can see safely and clearly behind you.
It wasn’t long before people understood that by assisting the driver in avoiding an accident while backing up, a backup camera may also increase pedestrian and motorist safety. These days, backup cameras help with parking, blind spots, and other safety measures.
Without Wi-Fi, a wireless camera can function. The purpose of wireless cameras is to wirelessly send audio and video signals to a recording device or a receiver. Wireless cameras don’t always need a Wi-Fi connection to work, even though they are frequently used in conjunction with Wi-Fi for remote viewing and control.
The backup camera’s adjustment will vary depending on the kind and mounting method. While some cameras may be easily adjusted within their case, others need to be removed, adjusted, and refastened with tools. You’ll need the necessary tools if you need to open the camera enclosure to remove and adjust the camera.
Upon exiting REVERSE, the backup camera will switch off. Certain vehicles additionally enable you to manually deactivate the backup camera by pushing a button.
These solutions eliminate the need to put cabling through your car by establishing a wireless link between the camera and monitor. Eliminating this portion of the installation process, which is typically the most challenging, reduces the installation time in half!
Installing a backup camera is simple, and if you’re even slightly handy, you can do it yourself. Although every car is a little bit different, installing a backup camera is generally identical regardless of the type of vehicle you drive.