How To Install LINGDU AM100 4K Car Dash Cam User Instruction

How To Install LINGDU AM100 4K Car Dash Cam

The LINGDU AM100 4K Car Dash Cam will improve your driving experience and guarantee your safety. Not only does this dash cam record detailed footage, but it also has a tonne of advanced capabilities like GPS tracking and loop recording. It is well-known for its sturdy features and crystal-clear video clarity. Installing the LINGDU AM100 is simple, making it ideal for both regular drivers and auto enthusiasts. To add this superior surveillance equipment to your car and feel safer while driving, simply follow our simple instructions.

Safety Information

• Do not disassemble, repair, or modify the product yourself.
  Doing so may cause fire, electric shock, or malfunction. For internal inspection and repair, contact the service centre.
• If any foreign matter gets inside the product, detach the power cord immediately.
  Contact the service centre for repair.
• Do not adjust the product while driving.
  Doing so may cause an accident. Stop or park your car in a safe place before installing and setting up the product.
• Do not install the product in a location where the product can interfere with the driver’s field of vision.
  Doing so may cause an accident.
• Do not use a damaged or modified power cord. Only use the cords provided by the manufacturer. Damaged or modified power cords may cause an explosion, fire, or malfunction.
• Do not operate the product with wet hands.
  Doing so may cause electric shock.
• Do not install the product in an environment with high humidity, or combustible gases or liquids.
  Doing so may cause an explosion and/or fire.
• Do not leave the product near infants, children, or pets.
  There is a risk of them swallowing small components, and/or their saliva may get into the product, causing an explosion due to a short circuit.
• Do not spray water or wax directly onto the product while cleaning the inside of the car.
  Doing so may cause fire, electric shock, or malfunction.
• If smoke or an unusual smell is emitted from the power cord, detach the power cord immediately.
  Contact the service center or your distributor.
• Keep the terminals of the power cord clean.
  Failure to do so may cause excessive heat and fire.
• Use the correct input voltage.
  Failure to do so may cause explosion, fire, or malfunction.
• Plug in the power cord firmly so that it cannot easily be disconnected.
  Failure to do so may cause fire.
• Do not cover the product with any material.
  Doing so may cause external deformation of the product or fire. Use the product and peripherals in a well-ventilated location.

What is in The Box?

Check the box for each of the following items before installing the dash cam.

• Dash camera ×1
• Electrostatic films x2 Car charger ×1
• Type-C USB Power cable (3.5M/12ft)×1
• Storage card x1
• Cable clips x 5
• User manual x 1

Getting Started

The camera is designed to power up and record automatically when it receives power. Then saves the video record and turns off automatically when the car shuts off.

1. Auto Power ON/OFF
   Plug car charger to the cigarette lighter socket. When the car engine is on, dash cam will turn ON and start recording automatically. When the car key is turned to LOCK position, dash cam automatically saves the recording and turns OFF.
2. Manual Power ON/OFF
   Manually Turn ON: Press the power button once.
   Manually Turn OFF: Press and hold the power button for at least 2 seconds.

AM100 4K Car Dash cam installation

Install the front camera behind the rearview mirror. Remove any foreign matter and clean and dry the windshield before installation.

1. Turn off the engine, and gently push the card into the slot until it locks into place. (Please use class 10 or above high-speed U3 micro-SD card)
2. Find a suitable place on the windshield that doesn’t obstruct the driver’s field of vision remove any foreign matter and clean and dry the windshield before installation. Tear off the protective layer of the electrostatic sticker and adhere the electrostatic sticker to the windshield to prevent marking/glue on your windshield after removing it.
3. Peel off the protective film from the double-sided tape and attach the front camera to the electrostatic sticker. Adjust the angle of the lens by rotating the body of the front camera.
4. Plug the cigarette lighter power cable into the cigarette lighter socket and the front camera. Use the pry tool to lift the edges of the windshield trim/moulding and tuck in the power cord.
5. Turn on the engine. The dashcam will power up and start recording. Video files are stored on the microSD card. Turn off the engine. The dashcam will automatically stop recording and power down.

General Setting

Video Settings

• Video Resolution
• Loop Recording — 1min/ 2mins(Default)/ 3mins
• Audio Recording — On(Default)/Off
• G-Sensor — Off/ Low/ Medium(Default)/ High
• Parking Mode
  • Time-Lapse Parking Mode:
  • Collision Detection Parking Mode
• Time-Lapse Parking Mode Working Time — Off/
  1H- 24H (Default 6H)
• GPS Information
• Frequency — 50HZ(Default)/ 60HZ
• Volume — Off/ Low/ MID(Default)/ High
• Voice capture associated video length —
  20s(Default)/ 10s
• ADAS Intelligent Driving Assistance — Off(Default)
• Fatigue Driving Reminder— Off(Default)/ 1H/ 2H/

Video Stamps

• Date/Time

System Setting

• Time Zone
• Synchronize Time
• SD Card Information
• Format SD Card
• WiFi Name
• WiFi Password
• Default Setting
• Firmware Version

FAQs of LINGDU AM100 4K