How To Install Pioneer AVH-200EX Car Multimedia DVD Receiver Installational Guide
![How-To-Install-Pioneer-AVH-200EX-Car-Multimedia-DVD-Receiver-Installational-Guide-product](https://www.autouserguide.com/wp-content/uploads/2023/12/How-To-Install-Pioneer-AVH-200EX-Car-Multimedia-DVD-Receiver-Installational-Guide-product.png)
How to Use Pioneer AVH-200EX
-
What You Need: Tools and Materials
- Pioneer AVH-200EX Car Multimedia DVD Receiver Wiring
- hardware adapter for your vehicle
- Dash installation tool (if you need it)
-
Forks and spoons
-
Tool to strip and crimp wires
-
Socket set up
-
Tools for removing trim panels
-
Tape for electricity and heat shrink tubes
-
Connectors for wires
-
Multimeters, zip ties, and sticky clips
-
Connectors that connect
Steps for installation
-
Disconnect the car battery: To make sure you’re safe during installation, start by removing the negative terminal of your car’s battery.
-
Get the wire harness ready by connecting the adapter to the Pioneer AVH-200EX’s wiring harness. Connect the Pioneer unit’s wires to the harness adapter’s wires that are the same color. Crimp connectors are used to keep these links safe, and electrical tape or heat shrink tubing is used to insulate them.
-
Mount the receiver: If needed, use the right fitting kit to connect the AVH-200EX to the dash. Use screws to hold it in place.
-
Plug the wiring harness connector into the wiring harness on your car to connect the wires. Make sure that every link is safe.
-
Connect the antenna: Plug the antenna wire from the car into the antenna input on the Pioneer receiver.
-
Connect the wire for the parking brake. Join the parking brake wire from the Pioneer unit to the wire for the parking brake button. For safety reasons, this link is needed because some features, like playing videos, might not work when the car is moving.
-
Place the power and ground wires in the correct places. The yellow wire should be connected to a power source that gives off a steady 12V, the red wire should be connected to a power source that changes based on the start, and the black wire should be connected to a clean metal chassis ground. Use a multimeter to make sure you have the right lines.
-
Connect the speaker wires: On the wiring harness adapter, connect the speaker wires from the Pioneer unit to the wires that go with them. Make sure the polarity is correct (positive to positive, negative to negative).
-
Fix any loose wires: Use zip ties and sticky clips to fix any loose wires and keep them from getting in the way of other parts of the car.
-
Put the car battery back together. Put the negative wire back on the battery.
-
Check out the system: When you turn on the Pioneer AVH-200EX, make sure that all of its features, such as audio, video, and Bluetooth connectivity, work properly.
-
Install trim panels: If you took off any trim panels, carefully put them back on the vehicle.
-
Fine-tune audio settings: On the Pioneer unit, change the audio settings to your liking.
-
Last checks: Make sure there are no loose wires or parts and that all the connections are correct. Also, make sure the unit is safely mounted.
FAQs Of Pioneer AVH-200EX
The Pioneer AVH-200EX is a car multimedia DVD receiver, an audio and video system designed for in-car entertainment and connectivity.
It features a 6.2-inch touchscreen display for easy navigation and control.
Yes, it has a built-in DVD player, allowing you to watch DVDs in your car.
It supports various audio formats, including MP3, WMA, AAC, and more.
Yes, it has Bluetooth built-in, enabling hands-free calling and audio streaming from your smartphone.
No, this model does not support Android Auto or Apple CarPlay.
Yes, it has a rear camera input, making it compatible with backup cameras for safer parking.
Yes, it comes with an AM/FM tuner to listen to radio stations.
It typically provides up to 50 watts of peak power per channel.
It can be compatible with some steering wheel control interfaces, but you may need an additional adapter.
Yes, it has a USB input for playing videos and music from USB drives.
Yes, it features an equalizer with various preset EQ settings for customizing your audio experience.
It supports video formats like DivX, Xvid, MPEG-1, and MPEG-2.
No, the AVH-200EX does not have a detachable faceplate.
Yes, it has multiple RCA preamp outputs for connecting to external amplifiers and subwoofers.