How To Operate Avital 4105L 1-Way Remote Start System User Manual
With the 4-button remote control, you can use the 1-way remote start system from Avital 4105L to start your car from a distance. This device is intended to improve your driving experience by offering comfort and convenience, particularly during inclement weather. By using the Avital 4105L, you can ensure a more comfortable ride by preheating or cooling your car before stepping inside.
Using the System
Locking
Pressing ® for one-second locks the system (if the door locks are connected). The horn honks and the parking lights flash once to confirm the system is locked. The Failsafe® Starter Disable also activates and prevents the vehicle’s starter from cranking.
Important note
Horn Honk and Failsafe are both optional features.
Unlocking
Pressing & for one second unlocks the doors (if connected). The horn
honks twice and the parking lights flash twice to confirm the unlocking of the system. The Failsafe Starter Disable (if connected) is deactivated.
Panic Mode
If you are threatened in or near your vehicle, you can attract attention by triggering the system with your remote control. Press ® for approximately two seconds to enter Panic Mode. In Panic Mode, the horn will honk and the parking lights will flash for 30 seconds. To stop Panic Mode at any time, press on the remote control.
Remote Start
This feature allows you to remotely start and run your vehicle for a programmable period. This makes it possible to warm up the engine and adjust the interior temperature of the vehicle with the climate control system. If interior heating or cooling is desired, the climate controls must be preset, and the fan blower must be set to the desired level before remote starting the vehicle.
To remote start the vehicle:
- Make sure the parking brake is set. Press the X button on the remote control once* for the number of times the system has been programmed to activate the remote start).
- The parking lights flash to confirm that the vehicle is attempting to start. In gasoline vehicles, the engine will start four seconds after the parking lights flash, in diesel vehicles the engine starts after the WAIT-TO-START timer has expired.
- Once the vehicle has started, it will run for the pre-programmed
period (12, 24, or 60 minutes) or until a shutdown input
is triggered.
The factory setting is one press but this can also be programmed for two or three presses maximum (see your authorized Directed installer for the amount of presses programmed).
Record the number of presses to activate the remote start here:
If the engine fails to start, refer to the “Disabling the Remote Start System” and “Remote Start Diagnostics” sections of this guide.
Pairing a Remote Control
Your system comes with the remote controls already programmed, however, if you are replacing or adding additional remote controls, they must be paired to the system before operating the system. To pair the remote, you need to know where the Valet button is located. If the horn honk is not connected, the main unit LED needs to be visible for visual confirmation. If you cannot locate or access the main unit, it is recommended that you visit your authorized dealer to pair the remote. The system is capable of accepting up to four remote controls.
- Turn the key to the ON position.
- Within 10 seconds, press and release the Valet button once.
- Within 10 seconds, press and hold the Valet button. The LED on the module flashes one time and the horn (if connected) honks to confirm entry into remote pairing. Do not release the Valet button.
- Press the ® button on the remote control. The horn honks to confirm the remote has been paired
- Release the Valet button.
- Turn the key to the OFF position. The horn sounds one long honk life connected) to confirm that remote pairing has exited.
Frequently Asked Questions
To start your vehicle remotely, press and hold the “Start” button on the remote control for approximately two seconds. The vehicle’s engine will start.
The range of the remote control varies but is typically around 1,500 to 2,500 feet. However, the actual range may be affected by factors like interference and obstructions.
Yes, you can use the remote start feature in various weather conditions, including extreme cold or hot weather, to pre-condition your vehicle’s interior.
Programming additional remote controls typically involves following a specific sequence of button presses on the existing remote and the new remote.
Some Avital systems allow you to shut off the engine remotely by pressing a dedicated button on the remote control.
Replace the battery in the remote control. Most remote controls use standard coin-cell batteries, such as CR2032. Refer to the user manual for battery replacement instructions.
Yes, it is possible to install the Avital 4105L system on manual transmission vehicles, but it requires additional safety features and precautions during installation to prevent accidents.
Use the designated lock and unlock buttons on the remote control to lock and unlock your vehicle’s doors remotely.
Some Avital systems can be integrated with additional security features, such as an alarm system or vehicle tracking.
The Avital 4105L may include safety features like a starter kill relay and a valet button to prevent unauthorized use. These features are designed to enhance security.
Integration with an existing alarm system may be possible, but it depends on your specific vehicle and alarm system.