How To Operate DEWALT DXAEPI1000 Car Power Inverter User Manual
When you’re on the go and need a dependable supply of AC power for your tools and electrical gadgets, the DEWALT DXAEPI1000 Car Power Inverter is a strong and adaptable gadget. In the realm of power tools and equipment, DEWALT is a well-known and reliable brand, and its power inverters are no different from its stellar reputation for dependability and quality. With the help of this specific model, the DXAEPI1000, you may operate a variety of appliances and equipment straight from your car, truck, or recreational vehicle by converting the DC power from your vehicle’s battery into conventional AC power. With a 1000-watt continuous power rating and a 2000-watt peak power output, it can power a wide range of power-hungry gadgets, such as laptops, power tools, cellphones, kitchen appliances, and more.
The DEWALT DXAEPI1000 Car Power Inverter has several key features, including USB ports for charging tiny electronics and multiple AC outlets for connecting multiple devices at once. Advanced safety features like overload protection, short-circuit protection, and thermal shutdown are also included in the inverter, guaranteeing the security of your gadgets and the electrical system in your car. The DEWALT DXAEPI1000 is a compact, sturdy tool with integrated handles for convenient carrying, developed with portability in mind. It is perfect for use on road trips, camping, job sites, and emergency scenarios because it includes battery clamps that allow for a fast and secure connection to your car’s battery.
Components
Front
- LCD
- USB ports
- Power button
- USB power/fault indicators
- Three-prong 120V AC outlets
- Mounting brackets are shown with and without protective rubber grommets (4 of each)
Back
- Negative (black) cap
- Negative (black) cable post
- Negative (black) post groove
- High-speed Cooling Fan
- Positive (red) post groove
- Positive (red) cable post
- Positive (red) cap
Accessories
- Battery Clips with cables and slide-in connectors
- Installation cable set
- Wing nuts and bolts for convenient installation
Bolt (x2) - Washer (x2)
- Wing Nut (x2)
How This Inverter Works
This inverter is an electronic device that converts low-voltage DC (direct current) electricity from a battery to 120 volts of AC (alternating current) household power. It converts power in two stages. The first stage is a DC-to-DC conversion process that raises the low-voltage DC at the inverter input to 145 volts DC. The second stage is a MOSFET bridge stage that converts the high voltage DC into 120 volts, 60 Hz AC.
Power Inverter Output Waveform
The AC output waveform of this inverter is known as a modified sine wave. It is a stepped waveform that has characteristics similar to the sine wave shape of utility power. This type of waveform is suitable for most AC loads, including linear and switching power supplies used in electronic equipment, transformers, and small motors.
Operating Environment
For best operating results, your inverter should be placed on a flat surface, such as the ground, car floor seat, or other solid surface to help diffuse the heat that is generated. Position the inverter as close to the DC power source as possible.
The inverter should only be operated in locations that meet the following criteria:
- DRY
Do not allow water and/or other liquids to come into contact with the inverter. - COOL
Surrounding air temperature should ideally be 50-68°F (10-20°C). Do not place the inverter on or near a heating vent or any piece of equipment that is generating heat above room temperature. Keep the inverter out of direct sunlight. - VENTILATED
Allow at least three inches of clearance from other objects to ensure free air circulation around the inverter. Never place items on or over the inverter during operation. - SAFE
Do not locate inverters in an area, room, or compartment where explosives or flammable fumes might be present, such as engine rooms, engine compartments, boats, or small, unvented battery compartments.
Connecting the Inverter
The inverter must be connected only to batteries with a nominal output voltage of 12 volts. The unit will not operate from a 6-volt battery and will sustain permanent damage if connected to a 24-volt battery. The standard North American 120-volt AC outlets and USB charging ports allow simultaneous operation of multiple devices. Simply plug the equipment into the unit and operate normally. Ensure that the wattage of all equipment simultaneously plugged into the unit does not exceed 1000 watts continuously.
Connection to Power Source
The Power Inverter comes equipped with Battery Clips for connection to a power source.
Frequently Asked Questions
The DEWALT DXAEPI1000 is used to convert DC power from a vehicle’s battery into AC power, allowing you to run various electronic devices and appliances while on the go.
The inverter has a continuous power rating of 1000 watts and a peak power output of 2000 watts.
You can power a wide range of devices, including power tools, laptops, smartphones, kitchen appliances, and more.
It typically comes with two standard AC outlets for connecting your devices.
Yes, the DXAEPI1000 has USB ports for charging smaller electronic devices like smartphones and tablets.
It is compatible with most vehicles, as long as they have a 12-volt DC power source (like a car battery).
The inverter comes with battery clamps for easy and secure connection to your vehicle’s battery terminals.
Yes, the inverter includes safety features such as overload protection, short-circuit protection, and thermal shutdown to protect both your devices and your vehicle’s electrical system.
Yes, the DXAEPI1000 is portable and suitable for powering devices while camping or during outdoor activities.
The exact dimensions and weight may vary, but it is designed to be compact and portable for ease of use and transport.
Yes, the inverter is capable of running various power tools, making it useful for job sites.
The runtime depends on the capacity of your vehicle’s battery and the power consumption of the devices you are running. It’s essential to monitor your vehicle’s battery to avoid draining it completely.
While it’s primarily designed for vehicle use, you can use it in a pinch during a power outage at home, provided you have a suitable 12-volt DC power source.
DEWALT is known for producing durable and rugged equipment, and this inverter is designed to withstand demanding conditions.