How To Use Slime 50122 Flat Tire Puncture Emergency Kit User Instruction
The Slime 50122 Flat Tire Puncture Emergency Kit is your dependable ally for effectively and conveniently managing unexpected flat tires. This all-inclusive package is made to save you from the stress and inconvenience of an unexpected flat tire, so you can quickly get back on the road.
There are two crucial parts included in the Slime 50122 Emergency Kit:
- Tire Sealant
The first thing you should do to prevent tires from puncturing is to use this specifically made sealant. It is intended to seal punctures up to 1/4-inch in diameter, so stopping more air loss and enabling you to proceed safely on your travels. - Tire Inflator (Analog) Pump
The accompanying tire inflator pump is a strong tool for rapidly re-inflating your tire to the necessary pressure. It has a solid, easy-to-read analog gauge. You can easily monitor and regulate the inflation process thanks to its user-friendly design, ensuring that your tire is correctly inflated for a safe and comfortable ride.
Key Features
- Compact and portable design, making it easy to store in your vehicle for on-the-go emergencies.
- Universal compatibility, suitable for a wide range of vehicles, from cars and trucks to SUVs and more.
- User-friendly operation, allowing even those with minimal mechanical experience to handle tire repairs.
- Cost-effective and time-saving, eliminating the need for a tow truck or professional assistance during minor tire emergencies.
- Peace of mind on the road, knowing you have a dependable solution to address flat tires whenever they occur.
Air Only Instruction
- Select AIR ONLY.
NOTE: Lay the Flat Tire Repair Kit on the ground facing upward. - Screw the air/sealant hose onto the tire’s valve stem.
- Plug the inflator into a 12-volt accessory power outlet. Do not run the vehicle while the inflator is operating. You may need to be in an “accessory” or “on” position. Please make sure the emergency brake is set and the car is in the park.
- Push the green button to turn the system on. Fill to the desired pressure. Turn the system off and check the tire pressure. Once correct tire pressure has been achieved, disconnect the air hose and power plug.
CAUTION
- HOT DO NOT HOLD IN HAND WHILE OPERATING
- PLACE THE INFLATOR ON A HARD, CLEAN SURFACE.
- DO NOT run the vehicle while the inflator is operating. You may need to be in an “accessory” or “on” position. Please make sure the emergency brake is set and the car is in the park. Always ensure the valve connector is fully seated to depress the core of the valve stem for proper inflation.
- DO NOT use the inflator continuously for more than 10 minutes. Allow the unit to cool for approximately 25 minutes between uses. Do not leave the inflator unattended.
- ALWAYS use a pressure gauge to check tire pressure. DO NOT overinflate.
- Soft inflatables (i.e. rafts, balls, etc.) may not have recommended pressure markings. Be careful not to inflate items beyond their capacity.
- While operating, never block the inflator input or output.
- Keep the inflator out of reach of children.
- For use with 12-volt DC power outlets rated 15 amps or higher. Do not use it with older 8-amp cigarette lighter receptacles.
Frequently Asked Questions
The kit includes tire sealant and a tire inflator pump with an analog gauge.
The sealant is designed to seal punctures up to 1/4 inch in diameter, preventing further air loss from the tire.
Yes, it is designed to be compatible with a wide range of vehicles, including cars, trucks, and SUVs.
Simply attach the sealant to the valve stem, and it will automatically dispense into the tire when you inflate it.
It is recommended for single-use per tire, as it may not be as effective for multiple punctures.
Connect it to your vehicle’s power source (usually the 12V outlet) and the valve stem, then use the analog gauge to monitor and control the inflation process.
The kit is suitable for standard passenger vehicle tires.
The time can vary depending on the tire size, but it is designed to work quickly to get you back on the road.
Yes, the analog gauge is designed to be user-friendly and provides accurate pressure readings.
No, the sealant container is meant for single use only.
The kit is primarily designed for small punctures, and it may not be effective for larger tire damage or blowouts.
This kit is intended for temporary repairs. It’s important to have the tire professionally inspected and repaired or replaced as soon as possible.
It is recommended to periodically check the sealant’s expiration date and replace it if necessary.
Yes, the Slime 50122 Emergency Kit is designed for user-friendly operation, making it accessible to those with minimal mechanical experience.