How To Use Viper 5706V LCD 2-Way Security Owner’s Guide
A sophisticated and feature-rich auto security system, the Viper 5706V LCD 2-Way Security System is made to keep your car safe from theft and other possible dangers. This system was created by the well-known automotive security business Viper to give users peace of mind by including a plethora of convenience and security features.
Key Features
Mutual Communication
The system’s capacity to communicate in both directions is one of its most notable qualities. It comes with a remote control with an LCD screen that shows feedback and confirmation of actions performed in real-time. This implies that you will always be in control because you will instantly receive notifications on your remote whenever your car’s alarm goes off or when specific actions, like locking or unlocking the doors, are taken.
Distant Start
With the help of the Viper 5706V, you may remotely start the engine of your vehicle. This allows you to pre-warm or pre-cool your car before you get inside, which may be very handy, especially in severe weather situations.
Features of Security
Numerous security features, including a car alarm, shock sensor, and starter kill function, are included with this security system. In addition, it has a keyless entry, which makes it simpler to lock and open your vehicle without a physical key.
Range
The Viper 5706V boasts an outstanding two-way communication range that lets you watch and manage your car from a good distance—typically several hundred feet. This guarantees that even when you’re not directly next to your automobile, you can still use the system efficiently.
Personalization
Because of the system’s great degree of customization, you can configure it to your liking. You can program numerous remotes, change the sensitivity of the security sensors, and customize the system to suit your unique requirements.
LCD Screen
With its crisp LCD screen, the remote control offers comprehensive information about your car’s condition, making it particularly helpful for monitoring and troubleshooting.
Charging the remote control:
- Plug the USB end of the provided USB cable into the USB port on a computer. Insert the micro-USB connector into the micro USB port located on the side of the remote control. The text field will display CHARGE to indicate the remote control is charging (The remote remains operational while charging and can command the system).
- Once fully charged the text field will display FULL.
- The remote control is then ready for use. Disconnect the cable from the remote control end first.
Keys to using this manual
Specific actions (in bold type) and style conventions are used consistently throughout this manual, they are as follows:
- Press: implies pushing in and releasing a button.
- Hold: is used after Press actions when a button needs to be held in position for an extended period, typically several seconds.
- ARMED This style denotes the text that appears in the text field portion of the Display during operations described in the manual. If the text string is too long for the text field, it then plays and loops sequentially word by word.
- Italicized words denote section/subheadings in this guide and can be located through the table of contents.
- An asterisk (*) when used after a word or phrase denotes that additional details can be found in related sections usually noted at the bottom of the page or end of the section.
Battery Life
The Responder LC remote control has many features that make it one of the most unique remote controls on the market today, including superior long-range communication with the system. The default feature settings provide for excellent battery charge duration. However, to maximize this duration between charges, the following suggestions will help:
- Turn the remote OFF: When not in use and/or out of range of the vehicle the remote can be turned off in the Main Menu.
- Turn Paging OFF: The remote will not wake up to check for messages with Paging off in the Setup Remote Menu. Caution! The
remote will not receive trigger messages from the system. - Turn Beeps OFF: The Button beeps can be turned off in the Setup Remote Menu. The command beeps still play normally.
Battery Information (1-Way)
The 1-way companion remote is powered by one 3V coin cell lithium battery (RPN: CR-2032) that can be purchased at most retailers. When the battery begins to weaken, the operating range is reduced.
Battery Replacement
- If present, remove the small screw on the back of the remote.
- Use a small flat-blade screwdriver and insert it into the slot located along the bottom of the remote, near the key ring. Carefully pry open the case.
- Gently slide out the used battery to remove it from the holding clip. Orient the new battery for the correct polarity and insert it into the holding clip.
- Reposition case parts, and snap together by pressing firmly and evenly on the front and back. Reinstall the screw (if applicable).
Frequently Asked Questions
The Viper 5706V is an advanced car security system designed to protect your vehicle from theft and enhance convenience. It offers two-way communication, remote start, and various security features.
The two-way communication feature allows the remote control to receive real-time feedback from your vehicle, confirming actions like locking, unlocking, or alarms triggered.
Yes, you can start your car remotely with the Viper 5706V. The range typically extends to several hundred feet, providing convenience and comfort, especially in extreme weather conditions.
Yes, it includes a car alarm system to protect your vehicle from unauthorized access or theft attempts.
Yes, the system often comes equipped with a shock sensor that triggers the alarm if it detects any attempt to break into or tamper with your vehicle.
Yes, the starter kill function disables the ignition system, preventing the vehicle from starting if unauthorized access is detected or if the alarm is triggered.
Yes, you can remotely lock and unlock your car using the keyless entry feature.
The remote control typically has a range of several hundred feet, allowing you to control your vehicle from a considerable distance.
The number of remotes you can program may vary, but you can usually program multiple remotes to work with the system.
Yes, the system is highly customizable, and you can adjust the sensitivity of the security sensors to suit your preferences and needs.
Yes, the remote control features an LCD screen that provides detailed information about your vehicle’s status.
Some versions of the Viper 5706V may offer additional security features such as glass break sensors or proximity sensors.
The system is compatible with a wide range of vehicles, but compatibility may vary depending on the make and model. It’s essential to check compatibility before installation.