How To Use VTOMAN V10 Pro Jump Starter User Manual
The VTOMAN V10 Pro Jump Starter is a 4500A jump starter that can be used for 12V vehicles. It can also be used as a portable power bank and has a 400-lumen LED. The VTOMAN V10 Jump Starter is also available and can boost up to 9L gas and 7L diesel engines. It has a PD30W two-way quick charge and an LED work light. V10 2500A portable lithium battery jump starter pack can start your 12V vehicles (9L gas or 7L diesel engine) – up to 60 jumps on a single charge, can be used for SUVs, trucks, vans, RV, motorcycles, dozers, tractors lawnmower, etc even in extreme weather from -4℉~140℉.
A.PRODUCT LAYOUT
OPERATION GUIDANCE
Storage Level Indicators
Press the switch to check the Jump Starter’s battery level
The indicator will flash sequentially while the Jump Starter is charging. The number of lit indicators corresponds to the Jump Starter’s storage level. Once fully charged, all indicators will turn off.
Epower Charging Instruction
- Connect the USB cable with the home adaptor and then plug
the home adaptor into the universal socket. - Connect the USB-C connector to the V10 PRO host.
Instruction for Jumping start 12V vehicle(by Intelligent jumper cable):
- Fully insert the blue plug into the host.
- Attach the Red Clamp to the positive (+) battery terminal and the Black Clamp to the negative (-) battery terminal.
- Follow the Cable Indicator’s instructions for operation:
GREEN LIGHT on
Telling the connection is correct and the circuit is working, you can turn on the engine to jump-start directly.
GREEN LIGHT blinking
Saying the vehicle battery is low, press the “BOOST” button, wait until GREEN LIGHT becomes solid, then turn on the engine within 30s.
REVERSE RED LIGHT on
Telling the connection is wrong, to correct the clamps as step 2 mentioned above, wait until the GREEN LIGHT is on to turn on the engine.
No Lights on
Saying the vehicle’s battery may be damaged, after confirming the clamps connection is correct, press the “BOOST” button, wait until GREEN LIGHT is on, and then turn on the engine within 30 seconds.
Start the vehicle.
When the vehicle is started, remove the jumper cable from the vehicle battery. Leave the vehicle’s engine running.
Charging Cell Phone or Tablet Instruction
- Plug the switch cable into the Quick Charge output port.
- Select the appropriate connector and connect it to your mobile phone or tablet.
- Press the switch button to charge.
For power supply to vehicle products or electronics
- Plug the optional switch cable to the 15V 10A output port.
- Connect the optional switch cable and vehicle product or electronics.
- Press the switch button to power the supply.
LED flashlight
Press the switch for 3 seconds to start the LED flashlight.
3 modes of LED light appear in order (normal. strobe. SOS. off) if you press slightly.
PARTS LIST
| # | Parts Name | Quantity |
| 1 | V10 PRO | 1 |
| 2 | Charging cables | 2 |
| 3 | Intelligent Jumper Cable | 1 |
| 4 | User Manual | 1 |
| 5 | Storage case | 1 |
TECHNICAL SPECIFICATIONS
| Model No.: JS-391 |
| Battery Capacity: 88.8Wh |
| Input: 5V 3A 15W |
| USB-C Output: 5V 3A 15W |
| USB-A Output: QuickCharge(5V 3A,9V 2A,12V 1.5A);5V 2.4A |
| USB-A Output: 5V 2.4A |
| DC Output: 15V 10A |
| Start current: 800A |
| Peak current: 4500A |
| Full charging time: About 5-6 hours (5V/3A) |
| Dimension: 220x102x41mm |
| Weight: 820g |
| Operating temperature: -4ºF~140ºF(-20ºC~60ºC) |
FAQ:
Q. How to turn off this V10 PRO?
A. V10 PRO will power off automatically when no load or charging is complete.
Q. How long time to fully charge the V10 PRO?
A. Approx. 5-6 hours through the USB-C input.
Q. How many times can this appliance charge for my cell phone? A. Depends on the battery capacity of your cell phone. Take the iPhone 13 as an example, can charge 6 times.
Q. How many times can this appliance jump-start the 3.0L Gasoline vehicle if it is in full battery?
A. Approx. 70 times on a single charge.
Q. How long the storage of the battery will remain?
A. 24 months, however, we suggest recharging it every 3 months to extend battery life.
TROUBLESHOOTING
| Finding | Cause | Remedies |
| No response when pressing the switch button. | Low voltage protection of the Jump Starter is started. | Plug the adapter into the USB-C input port to activate. |
TOXIC AND HARMFUL SUBSTANCES
WARNING
- Read the instruction manual carefully before using this unit.
- Do NOT use in place of a vehicle battery.
- Do NOT use it as a toy.
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Jump for 12V vehicles, would be a hazard if for other jumping.
- Use of an attachment not recommended or sold by a power pack manufacturer may result in a risk of fire, electric shock, or injury to persons.
- Do NOT connect the two clamps.
- Before starting, ensure that there is no corrosion at the interface and that no foreign matter adheres. Connect the main unit to the battery holder tightly to avoid the impact of the interface connection.
- After successfully starting the car, please remove the product from the car battery within the 30s, otherwise, it may cause damage.
- Do NOT Jump Start more than 3 times in a row, It could damage the unit by overheating. When starting up multiple times, each start-up interval is two minutes.
- Don’t use the jumper cable to charge other equipment.
- Do NOT store in locations where the temperature may exceed 60℃
- Charge only at ambient temperature between 0℃ and 45℃.
- Do NOT expose the product to rain or water
- Do NOT expose the product to extreme heat or fire.
- Do NOT operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Make sure someone should be within range of your voice or close enough to come to your aid when working with batteries.
- Remove personal metal items like rings, bracelets, necklaces, etc. When using the products.
- To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack.
- Do NOT use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Do NOT use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Charge only using the charger provided with this unit or the same standard as the host input port.
- After jump start the car, don’t charge this unit immediately.
- Do NOT use the unit to jump-start a vehicle while charging the internal battery.
- Under extreme conditions, the battery may leak. If a liquid is noticed coming from a product do not handle it with bare hands. In case of skin contact wash with soap and water immediately. If liquid comes in contact with eyes rinse eyes with cold running water for at least 10 minutes and get medical attention immediately.
- The product contains a lithium-based battery, and at the end of the product’s life disposed of product according to local regulations.
Customer Service
18 Months Limited Warranty Service
Lifetime Technical Service
Feel Free to Contact Us
Support@vtoman.com
For FAQ and More Information
Support@vtoman.com
Frequently Asked Questions
A jump starter is a portable device used to jump-start a vehicle with a dead or weak battery. It works by delivering a high burst of electrical power to the vehicle’s battery, providing the necessary energy to start the engine.
The suitability of the VTOMAN V10 Pro Jump Starter depends on your vehicle’s engine size and type. Refer to the product specifications or consult the manufacturer’s guidelines to ensure compatibility with your vehicle.
Key features may include a high-capacity battery, multiple charging ports, built-in safety features, an LED flashlight, and compatibility with various vehicle types.
Typically, you can charge it using the provided charger or a standard USB cable.
The battery capacity of the VTOMAN V10 Pro Jump Starter should be mentioned in the product specifications. It usually varies depending on the model.
Charging times may vary, but it usually takes several hours to fully charge the jump starter.
Yes, many jump starters, including the VTOMAN V10 Pro, come with USB ports for charging smartphones, tablets, and other electronic devices.
Common safety features include overcurrent protection, short-circuit protection, reverse polarity protection, and thermal protection. Always follow safety guidelines when using the jump starter.
Regularly check and recharge the jump starter to ensure it’s ready when needed. Inspect the cables and connectors for any damage and replace them if necessary.
The number of jump starts on a single charge depends on factors like the vehicle’s battery condition and the capacity of the jump starter. Refer to the product specifications for an estimated number.
Many jump starters are designed to operate in a wide range of temperatures, but it’s essential to refer to the product’s specifications to confirm its suitability for extreme conditions.