MOTOPOWER MP69033 Car Diagnostic Scanner OBD2 User Manual

MOTO POWER MP69033 Car Diagnostic Scanner OBD2 User Manual

For use by DIY mechanics and car owners, the MOTOPOWER MP69033 Car Diagnostic Scanner is a portable and powerful OBD2 (On-Board Diagnostics II) tool. Through the reading and clearing of trouble codes associated with the check engine light, the viewing of freeze frame data, and the monitoring of real-time sensor readings, it provides a simple method for diagnosing vehicle problems. Without the need for specialized equipment, this scanner offers important insights into a vehicle’s condition and is compatible with the majority of cars built in the United States starting in 1996 as well as European and Asian vehicles. For regular vehicle diagnostics and maintenance, the MOTOPOWER MP69033 is a useful and adaptable tool because of its user-friendly interface, support for multiple languages, and ability to retrieve VIN (Vehicle Identification Number) data.

Safety precautions and Warnings

To prevent personal injury or damage to vehicles and/or the code reader. read this instruction manual first and observe the following safety precautions at a minimum whenever working on a vehicle:

• Always perform automotive testing in a safe environment.
• Wear safety eye protection that meets ANSI standards.
• Keep clothing, hair, hands, tools, test equipment, etc. away from all motor hot engine parts.
• Operate the vehicle in a well-ventilated work area: Exhaust gases are poisonous.
• Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
• Use extreme caution when working around the ignition coil distributor cap ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
• Put the transmission in PARK (for automatic transmission)or NEUTRAL (for manual transmission)and make sure the parking brake is engaged. Keep a fire extinguisher suitable for gasoline/chemical electrical fires nearby.
• Don’t connect or disconnect any test equipment while the ignition is on or the engine is running.
• Keep the code reader dry, clean, and free from oil/water or grease. Use a mild detergent on a clean cloth to clean the outside of the code reader, when necessary.

Using the code reader

Tool Description

1. OBD II CONNECTOR- Connects the code reader to the vehicle’s Data Link Connector(DLC).
2. LCD DISPLAY- Indicates test result
3. Vehicle ID Number- Vehide identification code
4. UP SCROLL BUTTON- Moves up through menu and submenu items in menu mode. When more than one dT is retrieved move up through the current screen to the previous screens for additional DTCS and definitions.
5. RETURN BUTTON- Cancels a selection(or action)from a menu or returns to the menu. It is also used to set up the unit when being pressed and held for at least 3 seconds 
6. DTC BUTTON- Trouble Codes
7. OK, BUTTON- Confirms a selection (or action) from a menu When a DTC’S deforms covers more than one screen. it is used to move down to the next screen for additional data.
8. DOWN UP/-DOWN BUTTON- Moves up through menu and submenu items in menu mode. When more than one dT is retrieved move up through the current screen to the previous screens for additional DTCS and definitions.

Specification

1. Display:Badit,128 x64 pixel display
2. Operating Temperature: 0~60℃(32~140℉)
3. Storage Temperature:-20 ~70℃(-4 ~158℉)
4. External Power:8.0 to 15.0 Volts provided via vehicle battery
5. Dimensions:Length: 155mm Width: 85mm Height: 25mm
6. 0.198Kg(0.431b)

Accessories Included

1. User’s Instructions on Tool Operations
2. OBD2 provides power to the tool and communicates between the tool and the vehicle.

Navigation Characters
Characters used to help navigate the code reader are:

1. “Δ” Indicates the current selection.
2. “Pd”-Identifies a pending DTC when viewing DTCS
3. Identifies the control module number from which the data retrieved

Vehicle Power

The power of the code reader is provided via the vehicle’s Data
Link Connector(DL C). Follow the steps below to turn on the code reader

1. Connect the OBD II cable to the code reader
2. Find DLC on the vehicle: A plastic DLC cover may be found for some vehicles and you need to remove it before plugging the OBD2 cable.
3. Plug the OBD II cable into the vehicle’s DLC.

How to use

Using the MOTOPOWER MP69033 Car Diagnostic Scanner OBD2 is a straightforward process, designed to make vehicle diagnostics accessible to car owners and DIY enthusiasts. Here’s a step-by-step guide on how to use it:

Initial Setup

1. Unboxing and Inspection:
   • Open the package and ensure the scanner and any accompanying materials are present and in good condition.
2. Familiarization with the Device:
   • Get acquainted with the scanner’s buttons, screen, and OBD2 connector.
3. Review the Manual:
   • Read through the user manual for specific instructions and safety information.

Connecting to Your Vehicle

1. Locate the OBD-II Port:
   • Find the OBD-II port in your vehicle. It’s usually located under the dashboard, near the steering column.
2. Engine Off:
   • Ensure the vehicle’s engine is turned off before connecting the scanner.
3. Plug in the Scanner:
   • Connect the MOTOPOWER MP69033 to the OBD-II port.

Using the Scanner

1. Turn on the Ignition:
   • Turn the vehicle’s ignition to the “On” position, but do not start the engine. In some cases, you may need to start the engine.
2. Initialize the Device:
   • The scanner should power on automatically when connected. Wait for it to initialize and communicate with the vehicle’s computer.
3. Navigate the Menu:
   • Use the device’s buttons to navigate the menu. You will have options like reading codes, erasing codes, viewing freeze frame data, and monitoring live data.
4. Reading Diagnostic Codes:
   • Select ‘Read Codes’ to see any diagnostic trouble codes (DTCs) stored in the vehicle’s computer. These codes help identify issues.
5. Interpreting Codes:
   • The scanner displays codes and sometimes brief descriptions. For detailed explanations, refer to the manual or online resources.
6. Erase Codes:
   • After addressing the issues causing the codes, you can use the scanner to erase them. This often turns off the check engine light.

Additional Functions

• Freeze Frame Data:
  • Access this to see a snapshot of the vehicle’s condition when a fault occurred.
• Live Data:
  • View real-time data from various sensors and systems within the vehicle.

Post-Usage

• Disconnecting the Scanner:
  • Turn off the ignition, then gently unplug the scanner from the OBD-II port.
• Record Keeping:
  • It’s a good practice to keep records of the codes and the corresponding repairs or maintenance.

Maintenance and Safety

• Software Updates:
  • Check if the scanner requires periodic software updates for optimal performance.
• Proper Storage:
  • Store the scanner in a dry, safe place to protect it from damage.

Important Notes

• The MOTOPOWER MP69033 is a diagnostic tool and does not repair issues by itself. It provides diagnostic codes and data that help in identifying and troubleshooting vehicle problems.
• For complex vehicle issues, or if you’re unsure about a code, it’s advisable to consult a professional mechanic.

By following these steps, you can effectively use the MOTOPOWER MP69033 to diagnose and understand the health and status of your vehicle.

FAQs Of MOTOPOWER MP69033