NUSICAN N18 Car Battery Jump Starter User Manual
This is the NUSICAN N18 Car Battery Jump Starter, a strong, portable device that can jump-start your car if the battery dies. With a peak current of 1500A, this powerful tool can jump-start 12V cars with gas engines up to 7.0L and diesel engines up to 5.5L. Because it has an 18000mAh battery, the NUSICAN N18 can be used as both a reliable jump starter and a portable power bank to charge phones, laptops, and other electronics. It has USB quick charge 3.0 technology, which charges your devices quickly and effectively. It comes with a 3-in-1 multifunctional LED flashlight with different modes for extra safety and convenience. The NUSICAN N18 is a small but long-lasting tool that every car owner needs to have for peace of mind and quick charging in an emergency.
How to operate NUSICAN N18
Operating the NUSICAN N18 Car Battery Jump Starter is straightforward. Here are the steps to follow:
- Charge the Jump Starter: Before using, ensure that the NUSICAN N18 is fully charged. Charge it using the provided USB cable or AC adapter.
- Prepare for Jump Start: Make sure your vehicle is turned off. Open the hood and locate your vehicle’s battery.
- Connect the Clamps: Attach the red clamp to the positive terminal of your car battery and the black clamp to a grounded metal surface in the engine bay, away from the battery and any moving parts.
- Power On the Jump Starter: Turn on the NUSICAN N18. It should indicate that it’s ready to jump-start.
- Start Your Vehicle: Get into your vehicle and attempt to start the engine. It should crank and start.
- Disconnect the Jump Starter: Once the vehicle starts, turn off the jump starter. Carefully disconnect the black clamp first, followed by the red clamp.
- Recharge the Jump Starter: After use, recharge your NUSICAN N18 to keep it ready for the next emergency.
Remember:
- Always refer to the user manual for detailed instructions and safety information.
- Ensure that the jump starter has sufficient charge before using it.
- Never connect the red and black clamps.
- If the first jump-start attempt fails, wait a few minutes before trying again.
- Store the jump starter in a cool, dry place when not in use.
HOW TO CHARGE CELL PHONES OR OTHER DIGITAL PRODUCTS
- Plug the USB Port of the charging cable into the product USB interface.
- Inset the other side into the input port of the mobile phone.
- When connected OK, press then you can use it to charge now.
HOW TO USE THE LED EMERGENCY LIGHT
Hold 
for 3 seconds to turn the light on, then press lightly, and the LED light will shift to flashing, SOS then press for 3 seconds, and the LED light will be off.
HOW TO RECHARGE THE DEVICE
- Plug the charging cable Type-C In (Out)
- Inset the other side into the 220W(11 DV ) power, the indication light will be flicking. which shows it is undercharging
PARAMETER
PACKAGE CONTENT
HOW TO JUMP-START YOUR CAR
- Plug the lumper cable into the battery pack
- Connect the jumper clamps to the car battery (Red is positive and Black is negative)
- Start the car by turning on the ignition key
- After the car has been started, remove the plug from the battery pack and remove the clamps from the car battery
Note: Ensure the 1ump starter power level is 50% or more before jumping your car. Connect the positive(+ )(red) clamp from the jump starter to the positive terminal of the car battery, and connect the negative (- )(black) clamp to the negative terminal of the car battery.
ADVICE WARNINGS INDICATED ON THE DISPLAY
LOW VOLTAGE
The character ‘LV’ appears on the screen and the warning plays once per second. The screen will show a voltage lower than 14V.
ADVICE WARNINGS INDICATED ON THE DISPLAY
- HIGH VOLTAGE
The character ‘888″ appears on the screen and the warning tone plays. - REVERSE CHARGE
The characters ‘R C’ appear on the screen. The symbol·—· flashes and the warning tone plays once per second. Standby mode will resume immediately once the error is corrected. - REVERSE POLARITY OR SHORT CIRCUIT
The character ‘R&SC” appears on the screen. The·—” symbol flashes and the warning tone plays once per second. Standby mode will resume immediately once the error is corrected.
- HIGH TEMPERATURE
The characters “HT” appear on the screen. The • — ” symbol flashes and the warning tone plays once per second. Normal operation will resume once the device temperature lowers. - EXCESS CONNECTION TIME
When the connection time is too long for the clamps. the·—· symbol will flash on the screen, try step 2&3 of jump start again.
AT A GLANCE
- Power Button
- Power indicator light
- Smart Jump Clamps Port
- Output 2 (5V / 2.1 A)
- 0utput 1(5V /JA 9V /2A. 12V / 15A)
- LED light/ Torchlight/ SOS
- Power Input/ Output (5V/ JAi
- DC Output Port (12-16VI
Apart from jump-starting a car. this product can also supply power for a mobile phone, laptop, PSP, MP3/MP4, camera, and other consumer electronics, and with different lighting modes.
ACTIVATE YOUR 12-MONTH WARRANTY AND GET YOUR EXCLUSIVE GIFT
Register within 7 days of receiving your new product.
PLEASE VISIT: www.nusican.net/warranty
CUSTOMER SERVICE: us-jumper@nusican.net
NOTE: Dangers. Warnings and Cautions In Handign The Battery
- Please charge 3 hours or more before the first use If the battery is stored for more than 3 months, the product needs to be charged once to ensure the normal performance of the product.
- Please make sure the battery power of the jump starter is above 50% before use
- Do not use it continuously for more than 3 seconds. There should be at least 30 seconds between starting twice.
- Never short-circuit the Jump starter by connecting the RED and black clips (In case of reverse polarity connection by mistake. The product comes with related protection measurements to avoid lit-injury & property loss.)
- After the car starts. please unplug the plug from the product first, and then remove the clip on the battery
- Do not disassemble the jump starter.
- When children use this product. please operate under the guidance of parents.
- Store in a dry place, do not expose to wet conditions or nearby corrosive materials.
- If the jump starter swells and a leak or peculiar smell is found, stop using it immediately
FCC Warning
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received. including interference that may cause undesired operation.
FAQs for NUSICAN N18
A: The NUSICAN N18 is suitable for jump-starting 12V vehicles such as cars, trucks, motorcycles, boats, and RVs.
A: It can typically perform up to 20 jump starts on a single charge, depending on the condition and type of battery.
A: It includes over-current protection, short-circuit protection, overload protection, over-voltage protection, and over-charge protection.
A: It takes approximately 4-5 hours to fully charge the unit.
A: Yes, it has USB ports for charging devices like smartphones, tablets, and other USB-powered devices.
A: The NUSICAN N18 has a peak current of 1500 amps.
A: It is not typically waterproof, so it’s advisable to keep it dry and avoid using it in wet conditions.
A: Yes, it comes with a built-in LED flashlight with multiple modes including SOS and strobe.
A: It has an LED indicator that shows the battery level and charging status.
A: The warranty period can vary, so it’s best to check with the manufacturer or retailer for accurate information.
A: Yes, it is designed to operate in a range of temperatures, but extreme cold may affect battery efficiency.
A: It is relatively lightweight and portable, but the exact weight should be checked in the product specifications.
A: Yes, it includes heavy-duty jumper cables.
A: Yes, it can be used to power 12V appliances, provided they are within its power output capacity.
A: Store it in a cool, dry place and recharge it every three to six months to maintain battery health.