Philips GoPure GP5212 Car Air Purifier User Manual

Philips GoPure GP5212 Car Air Purifier User Manual

The Philips GoPure GP5212 is a very good car air purifier that is made to make the air inside your car better. This high-tech gadget uses strong filtration to get rid of up to 100 different kinds of pollutants, such as allergens, bacteria, viruses, and exhaust gases. With SelectFilter Plus, the air purifier can get rid of 90% of pollen allergens in the air, making it a great choice for people with allergies. It can also get rid of smoke, bad smells, VOCs, and other harmful particles, making the cabin cleaner and healthier for drivers and passengers. The GoPure GP5212 is especially helpful for people who spend a lot of time in their cars and are worried about the air quality, especially in cities with lots of traffic. Its small size, high-performance HEPA filter, and ease of use make it a useful addition to any vehicle, making driving more pleasant and better for your health.

How to Operate Philips GoPure GP5212 

To operate the Philips GoPure GP5212 Car Air Purifier, follow these steps:

1. Installation: Place the air purifier in a suitable location in your car, typically on the dashboard or rear shelf. Secure it using the provided mounting accessories to ensure stability during the drive.
2. Power Connection: Connect the purifier to your car’s power outlet using the included 12V cigarette lighter plug. Ensure the connection is firm and secure.
3. Turning On: Once connected to power, turn on the air purifier. This is usually done by pressing the power button on the unit.
4. Selecting Modes: The GoPure GP5212 may have different operating modes or settings. Select the desired mode based on your purification needs. Some models offer automatic mode, where the purifier adjusts its settings based on the air quality.
5. Using Smart Features: If your model supports smart features like air quality indicators, keep an eye on them to understand the air quality in your car. Adjust the settings if needed.
6. Regular Maintenance: Change or clean the filters regularly as recommended in the user manual. This ensures the purifier operates effectively and provides clean air consistently.
7. Safety Precautions: Do not obstruct air inlet and outlet vents. Keep liquids and moisture away from the unit to avoid damage.
8. Turning Off: When not in use, especially when leaving the car, turn off the purifier to conserve the car’s battery.
9. Manual Consultation: For specific features, settings, and safety instructions, always refer to the user manual provided with your Philips GoPure GP5212.

These general steps should guide you in operating most car air purifiers, including the Philips GoPure GP5212. For model-specific instructions, it’s always best to refer to the user manual or the manufacturer’s website.

Using GoPure car air purifier functions

When the vehicle power supply is on, the device starts automatically in auto mode.

1. To turn on the device, touch the power button, and the device will start running in auto mode emitting a sound.
2. Touch the power button to switch the speed mode in a sequence of auto, boost, and silent. The power button will emit a sound while being pressed.
3. To turn off the device, hold down the power button for 2s until it emits a sound.

Understanding air quality indicator
The air quality indicator shows the air quality inside your car at all times.

• Red: 80 ug/m3: Unhealthy air quality
• Yellow: 41-80 ug/m3: Fair air quality
• Blue: 0-40 ug/m3: Good air quality
• After the device is turned on, the filter replacement reminder indicator will flash red: Replace filter.

Philips GoPure car air purifier-How filter works

Philips GoPure Car air purifier is composed of a multi-layer filtration system that guarantees the most effective air purification. All filter layers are assembled in one single simple-to-replace filter.
Important: Philips GoPure car air purifier indicates automatically when you must change the filters.

When the filter needs to be replaced, the filter replacement indicator will flash red for 30 seconds and then remain red each time the device is turned on. Replace the filter immediately using only genuine Philips GoPure SelectFilter Plus. It helps maintain the maximal performance of your GoPure Car air purifier and helps to provide the purest air quality inside your car.

How to replace the filter

1. Disconnect the GoPure car air purifier device.
   1. High air purification power
      Product air cleaning performance

      Target pollutant*	Clean air delivery rate (CADR)	Cleaning energy efficiency grade
      Particles	20m3/h	High efficiency
      Formaldehyde	6.5m3/h	High efficiency
      Toluene	9.5m3/h	High efficiency
      TVOC	13m3/h	High efficiency
      NO2	16m3/h	High efficiency
      SO2	14m3/h	High efficiency

      Noise* (Sound power level): 55dB(A)
      Birch pollen removal**: 90%

2. Push the front side of the cover and take off the top cover.
3. Remove the old filter as shown.
4. Using the groove, insert a new original GoPure filter.
   Important: The filter slides in only one way, do not force it in.
   See above.

How to restart GoPure car air purifier after a filter replacement
Important: You must reset the Philips GoPure device after every filter replacement.

To reset your device after replacing the filter:

1. Plug the device into the power supply and ensure that it is turned off.
2. Touch and hold the power button over 3s until it emits a sound, the filter replacement indicator is blinking in red for 15s, filter reset is done once the indicator turns off.
3. The car air purifier purifier operates in the normal mode once the top cover is locked.
4. Repeat the above steps if the filter reset fails.
   Important: For your safety, the GoPure car air purifier will shut down automatically whenever you open the top cover.

FAQs Of Philips GoPure GP5212