REXING REX-V1 4K Ultra HD Car Dash Cam User Manual
The REXING REX-V1 4K Ultra HD Car Dash Cam is a state-of-the-art car accessory that is made to give drivers recordings of their trips that are clearer and more detailed than ever before. With its high-resolution 4K camera, this dash cam records footage with amazing detail, making sure that every detail of the road ahead is captured accurately. With features like loop recording, a wide-angle lens, and night vision, it’s made to be easy to use. This makes it an important tool for making driving safer and more secure. The REXING REX-V1 is a great choice for drivers who want a reliable dash cam that can record beautiful scenery on a road trip or provide evidence in the event of a traffic accident.
What’s in the Box?
- RexingVl Dash Cam
- Car Charger
- Dash Cam Mount Plate & 3M
- Adhesive
- Mini-USB Cable
- Cable Management Tool
- Cable Clips©
- Vl Quick Start Guide
- Vl Safety Guide
The items supplied with the device and any available accessories may vary depending on your region. Appearances and specifications are subject to change without prior notice. Availability of all accessories is subject to change. All supplied items are designed for use only with this device and may not be compatible with other devices. Malfunctions resulting from the use of unapproved accessories are not covered by the warranty service.
For more information about available accessories, refer to www.rexingusa.com.
Camera Overview
| NO. NAME DESCRIPTION | ||
| 1 | Micro SD Card
Slot |
Insert the Micro SD card into this slot. |
| 2 | POWER Button | Hold this button to turn the Dash Cam On or Off. |
| 3 | RESET Button | Hold this button for four seconds to reset the
Dash Cam to the factory settings. |
| 4 | MENU Button | Press this button to enter the setup menus. |
|
5 |
MODE Button | Press this button to select the Video, Photo,
Playback modes or stop video playback. |
|
6 |
REC Button |
Press this button to (a) Enable or disable video
recording or (b) Toggle up through recorded video, photos, and menu options. Note: The camera is recording when the LED is flashing red. By default, video recording is set to On. |
|
7 |
OK Button |
Press this button to accept a menu selection or set the emergency lock. Note: The camera is recording when the LED is flashing red. The device is charging or powered on when the
LED is solid blue. |
|
8 |
MIC Button |
Press this button to (a) Enable or disable
audio recording or (b) Toggle down through recorded video, photos, and menu options. Note: The device is charging or powered on when the LED is solid blue. By default, the audio recording is set to Off. |
| 9 | SCREEN Button | Press this button to turn the screen On or Off. |
|
10 |
Mini-USB Port | Connect the USB to the Mini-B Spin Male cable to this port. |
| 11 | GPS Logger Port | Connect the Rexing GPS Logger to this port. |
| 12 | Rear Camera Port | Connect the Rear Camera to this port. |
| 13 | Lens Angle
Adjustment |
Turn the dial to set the position of the
camera. |
Screen Overview
Getting Started
Installing the Dash Cam Mount
Follow these steps to install the Mount on the vehicle’s front window. Note: Ensure the distance from of the Mount and Car Charger is less than 12 feet.
- Place the 3M tape on the Mount. Note: Do not remove the release liner on the opposite side of the tape.
- Select, and clean, the location for the Dash Cam on the windshield. Important! Choose a safe, appropriate location that does not obstruct the driver’s view.
- Remove the release liner from the 3M tape.
- Properly orient the Mount and square it up to the roof and hood line of the vehicle. Important! Ensure the T-interlock on the Mount is oriented in the correct direction. Firmly press the Mount onto the windshield.
- Wait at least 20 minutes before attaching the Dash Cam to the Mount.
Insert the Memory Card
NOTE: Using an incompatible card may damage the device, the memory card, or corrupt the data stored on it. Always use a compatible memory card.
Always power down the device before removing the memory card. The manufacturer’s warranty does not cover any losses, including loss of data, due to the use of a damaged, or corrupt, memory card. This device accepts “High-endurance” Micro SD memory cards (class 10 or higher) with a maximum capacity of 256GB. Depending on the memory card manufacturer and type, some cards may not be compatible with the device. Visit www.rexingusa.com/memory-card to view recommended cards.
Follow these steps to insert the memory card into the device.
- Press and hold the Power button to turn the camera Off.
- Insert the card in the orientation shown. Listen for the click sound that signals the card is securely inserted.
Follow these steps to remove the memory card from the device. Important! Do not remove the memory card while the device is transferring or accessing information.
- Press and hold the POWER button to turn the camera Off.
- Gently push the memory card in until you hear a click, and allow the spring release to push the card out.
Power the Camera and Format the Memory Card
Charging the Battery
Connect your camera to your vehicle via the included car charging cable to power your camera and charge the battery while driving.
Connect the charger to the car cigarette lighter or 12V DC power outlet, then insert the Mini-USB end of the charger into the Mini-USB port on the camera.
- You should always connect the camera to a power source while recording. Our current product is powered by a super capacitor which means there is NO battery inside of the dash cam. Once the dash cam is disconnected from the power source, the dash cam will shut down automatically in 5 seconds.
- If the device receives an unstable power supply while charging, the screen may not function properly. If this happens, unplug the charger from the device.
- While charging, the device may heat up. This is normal and should not affect the device’s performance or lifespan.
- If the device is not charging properly, take the device and the charger to an authorized Rexing Service Center or contact care@rexingusa.com.
Connecting the charger improperly may cause serious damage to the device. Any damage caused by misuse is not covered by the warranty.
Use only Rexing-approved chargers. Using unapproved chargers or cables can damage the device or cause the battery to explode.
Formatting the Memory Card
Important: Always back up important data stored on the memory card before formatting. For best results, format the memory card using the Format function on the camera. The manufacturer’s warranty does not cover loss of data resulting from user actions.
Always format the memory card correctly before using the new card. Follow these steps to format the memory card.
- Make sure you have inserted your memory card, then turn on the camera by connecting it to a power source. Note: If the camera is On and not recording, go to Step C.
- Press the REC button to stop recording.
- Press the MENU button twice to enter the System Setup Menu.
- Use the REC and MIC buttons to navigate to the Format setting.
- Press the OK button to confirm the selection.
- Use the REC and MIC buttons and toggle to the OK option.
- Press the OK button to confirm and format the card.
At this point, disconnect from the power source. The camera will shut down automatically after 5 seconds. The next time the camera is connected to power, the camera should start up and begin recording automatically.
Installing the Camera onto the Windshield
Follow these steps to install the camera. Insert the plastic mount piece into the open space located on the back of the camera and slide the camera down to secure it to the windshield.
Product Specifications
- Image Sensor: SONY EXMORIMX307 CMOS
- Lens: 7-layer fixed-focus with full-glass elements
- CPU: Novatek
- Display: 2.4 inch, 4:3 TFT LCD
- Audio 1/0: Internal high-sensitivity mic and speaker
- External Memory: Class 10 or higher Micro SD card (up to 256GB)
- Gravity Sensor: Low/ Medium/ High/ Off
- Shutter: Electronic
- White Balance: Auto
- Exposure: Auto ISO
- Super Capacitor: Built-in
- Video Format: h.264 (.MOV)
- Video Resolution: 1920x1080p30f, 1280x720p30f
- Languages: English, Chinese, French, Spanish, Portuguese, German, Italian, Russian, Japanese
FAQs Of REXING REX-V1
The REXING REX-V1 supports a maximum video resolution of 4K, offering ultra-high-definition recording capabilities.
Yes, it is equipped with advanced night vision technology, ensuring clear recordings in low-light conditions.
The dash cam features a wide-angle lens that covers up to 170 degrees, providing a comprehensive view of the road.
Yes, it supports memory expansion via microSD cards, with a maximum storage capacity of up to 256GB.
Yes, it features loop recording, automatically overwriting the oldest files when the memory is full to ensure continuous recording.
Yes, it includes a built-in G-sensor that detects collisions and automatically saves and locks the relevant footage to prevent overwriting.
While specific connectivity features can vary, many REXING models offer Wi-Fi connectivity for easy management and viewing of footage via a smartphone app.
The parking mode monitors your vehicle’s surroundings while parked. If the G-sensor detects a vibration or collision, the camera will start recording automatically.
It is powered by a standard 12V car charger that plugs into the cigarette lighter port of your vehicle.
The dash cam comes with a mounting kit and can be easily installed on the windshield using the suction cup mount or adhesive mount provided.
Yes, it has a built-in microphone to record audio inside the vehicle, which can be disabled if preferred.
Yes, you can manually lock a video file by pressing a designated button on the device, ensuring important files are kept safe.
Firmware updates can be downloaded from the REXING website and transferred to the dashcam via a microSD card.
The serial number is usually located on the device itself, often on the bottom or back, or within the device’s settings menu.