ROVE R2-4K PRO Car Dash Cam
Thank you for purchasing the ROVETM R2-4K PRO Digital Vehicle Dash Cam (Automobile Black Box). This product provides high-quality image capture and irrefutable evidence for what goes on from the perspective of your dashboard. ROVE Dash Cam is a very elegant, convenient, and durable multi-vehicle driving recorder.
ROVE R2-4K PRO OVERVIEW
This Product is a leading Ultra HD Digital Vehicle Black Box
Recorder. Equipped with ULTRA-HD 3840P @30fps with SONY IMX335 Sensor for excellent low light sensitivity and high dynamic range which allows you to record continuous high-quality video playbacks and brings phenomenal 4K Ultra-HD resolution videos even at night without the need for infrared sensors. It has superior night vision technology which captures superb video under all low-light conditions. It has advanced built-in Wi-Fi, built-in GPS, G-Sensor, Emergency Video lock button, Audio recording, Loop cycle recording, 180º auto video rotation, Wide dynamic range, 24-HR Auto Trigger Parking Mode and so much more. When compared to most dash cameras, this exclusive product design provides an elegant appearance is packed with top-rated unique features, records superb unbeatable videos, and is very easy to use.
Getting Started
Please read and understand warnings & safety instructions before operating.
- Make sure to always keep the camera plugged into the power during its operation as ROVE R2-4K Pro uses a Supercapacitor (NOT an internal battery). You can plug the camera into your home’s 110V outlet during set up. For the power, you can use your cellphone’s USB charger and include a USB Type-C Cable.
Just make sure that the USB charger has a 5V, 1.5 AMP power output (Max 3.1 AMP), otherwise, the camera will not work properly. - You will need to insert a memory card before you can start recording. Please insert only a brand name Class-10, U3, or higher speed microSD card up to 512 GB max for reliable operation. (Memory card is NOT included in the packaging)
(We recommend ROVE Ultimate microSD Card up to 512 GB MAX.) - Before first time use, you MUST format the memory card in the camera to prevent any errors and for smooth operation. (See Page 30).
- ROVE R2-4K Pro Car dash cam is programmed to turn ON and START RECORDING automatically when it receives power, and STOPS RECORDING saves the last video file and turns OFF automatically when power gets disconnected within 1-2 seconds. (i.e., when you start /turn off your car)
- Setting Date & Time: Please set the correct date and time Based on your location under the TIME ZONE SETTING by going to the camera’s system settings menu. (See page 31 for details)
- How to hide the power cable inside your car’s dashboard?
Many people on YouTube already demonstrated how and where to hide the power cable inside your car. You can view one of the possible ways on the link, this video is NOT recorded by us.
https://youtu.be/xwD8Ilk-MHU - How to transfer videos to PC/MAC? Insert memory cards directly into your PC/MAC to view or download them.
You can also connect your camera to your PC/MAC with the included short Type-C USB data cable. Then Select Connect as a Flash Drive.
We recommend VLC Media Player to view your videos. You can get it free at www.videolan.org - Wi-Fi: You can also connect the ROVE R2-4K PRO Car Dashcam to your smartphone directly by using the built-in Wi-Fi feature. (See Page 32).
Car Dash Cam INSTALLATION
The camera comes with the default settings which allows you to start using your camera right out of the box without changing any settings. Make sure to format the memory card before first use.
- Installation Position: Most people will install their R2-4K PROnext to the rearview mirror and opposite side of the driver. First, Stop the engine where there is some light and in a safe place, and then remove the key.
- Make sure to clean your windshield from dust particles and evaporated grease from the dashboard surface.
Attach the ROVE R2-4K PRO with the suction mount. Set the camera lens to point forward to the centre when installing it. - To Lock The Suction Mount: Press & hold it tight towards the windshield to remove any air between the suction mount and the windshield. While pressing & holding towards the windshield, turn the LOCKING Knob towards CLOCKWISE to LOCK in place.
- Use the power cord to connect the USB Port of the product to the car’s cigarette lighter socket.
- Hide the cable inside the trim and use the included cable clips for additional support to organize the cable if needed so it does not interfere with the driver’s vision.
- Adjust the lens angle of the camera.
- Start the engine and check if the product works properly.
SAFETY & LEGAL ASPECTS:
All rights are reserved. Duplication, transfer, or distribution of the contents herein in any manner without the prior written permission of is prohibited. reserves the right to add, modify or delete, any of the contents herein or withdraw these documents at any time without prior notice and without assigning any reasons thereof. For detailed terms and conditions refer to www.rovedashcam.com
- Please check your local or state laws before using in car recording device. It is the user’s responsibility to comply with all local and state laws.
- Dash Cam must be placed at the proper location so it does not obstruct your view while driving.
Do not use or manipulate any functions or accessories of - ROVE Dash Cam while driving. Distraction is a leading cause of accidents.
- The images and icons displayed in this user manual are intended for illustrative purposes only. They are not real examples captured by the ROVE dash cam. The purpose of these visuals is to provide a visual representation of the features, functions, and user interface of the product.
TROUBLESHOOTING YOUR ROVE™ R2-4K PRO
- The camera does not turn ON
- Error/Message “Card Full”
- Camera Freezing/Lagging or Crashing.
- Video is fuzzy
- Camera gets HOT
- The camera turns ON / OFF frequently automatically.
- My oldest video files are missing
- microSD Card is crooked or not going in the slot easily
- My Video playback on my PC is lagging.
- The camera shows “Memory Error” or “Please Insert microSD Card” even though a memory card is already installed into the camera.
FAQs of ROVE R2-4K PRO
The ROVE R2-4K Pro records in 4K Ultra HD, providing four times the resolution of standard HD cameras for superior clarity and detail.
Yes, the ROVE R2-4K Pro features advanced night vision technology, utilizing a super-light sensor to capture clear footage in low-light conditions.
Absolutely! The dashcam is equipped with built-in WiFi, allowing you to connect it to the ROVE App on your smartphone to view and manage your videos effortlessly.
Yes, the ROVE R2-4K Pro includes a built-in GPS module, which records your driving location and speed, and embeds it into the video footage for more detailed information.
The parking mode feature uses built-in motion and impact detection sensors to monitor activities around your vehicle when it’s parked. The cam will start recording automatically if any movement or impact is detected.
The dashcam supports microSD cards up to 512GB, allowing for extensive video storage without the need for constant transfers.
Yes, it comes with a 1-year warranty, providing customers with support and protection against any manufacturing defects.
Installation is straightforward: mount the cam on your windshield with the included suction cup, connect it to power with the provided car charger, and it’s ready to record.
Yes, the dash cam records high-quality audio along with video, capturing complete details of your drives.
The ROVE R2-4K Pro boasts a wide 150-degree field of view, providing expansive coverage of the road ahead and ensuring that peripheral movements are not missed.