Toguard CE80A Rear View Mirror Dash Cam User Manual

Toguard CE80A Rear View Mirror Dash Cam

According to the Toguard CE80A Rear View Mirror Dash Cam, a multipurpose tool made to record every detail on the road, you can improve your driving experience. This device makes convenience and safety available to all drivers by skillfully fusing cutting-edge recording capabilities with a stylish, intuitive design.

Toguard CE80A Important Notice

• NOTICE: Due to the high power consumption of this unit, it should always be connected to an external power supply we provided inside the package. This camera should not power on without an external power supply connected.
• This product is intended for use in motor vehicles only. DO NOT install the device where it might block the driver’s view of the road (including the mirrors) or the deployment of the airbag.
• Before using this device, please insert the memory card first, and need to format the micro SD card to FAT32 format on the PC first, then format the memory card in camera menu.
• This device records video at high resolution, Be sure to use high speed memory card, U3 or above is recommended, 16GB or 32GB cards are recommended.
• We do recommend doing a benchmark test and making sure the unit is working perfectly before installing the unit on your vehicle.
• Be sure the lens is clean and there is nothing blocking the lens.
• Make sure you are using the original included power adapter to power the unit.
• DO NOT leave the device in direct sunlight for a long period of time or where the temperature could go above 170°F(75°C).
• The GPS function has to work with a customized GPS module, please download the “GX player”. Please contact the seller for details.

Installation of CE80A Mirror Cam

1. Before installation, please insert a high-speed memory card in the
   unit and format the memory card in the unit set, also do a simple test to make sure the unit is working perfectly.
2. Mount the mirror over the original rearview mirror and use the included rubber ring to fix it. Make sure the mirror is in the right
   place and secure.
3. Adjust the mirror angle according to your driving position, make sure the mirror is right in place and the view is clear.
4. Adjust the angle of the lens. Make sure you get the best coverage over the hood and the road ahead, so you can record what happens.
5. Connect the power adapter to the mirror and the cigarette lighter, then route the power cable along the interior trim board, you can route it as indicated below, and hide the excess cable in the gaps for good looks.
6. The rearview camera should be installed at the rear end of the car, normally the best place is above the number plate. The camera can be fixed with a sticker or a screw. You can see the diagram for reference.
   NOTE: Please check whether the backup camera is installed upside down before you install screws.)
7. The excess RED lead near the rearview camera is used for reverse status sensing. Connect the RED cable to the positive lead of the reverse lamp power.
8. Route the backup camera cable to the front of the car and connect it to the main unit. There are 2 pictures for reference.
   (NOTICE: Holes might need to be drilled to pass the cable and please check whether the cable for the backup camera is long for your car before you install it.)
9. After the installation is completed, please start the engine have a test run, and make sure all functions are working.

Featured Function

Dual Recording
The CE80A mirror comes with a dual channel lens, they can record video in Front 4K (2880*2160) + Rear 1080P (1920*1080) simultaneously.

Loop Record
This function allows you to set video file length to 1/3/5 minutes, Select a value to activate loop recording so that when storage fills up, the CE80A will automatically loop back to the earliest file and record over it.

EG
If the time is 3 minutes, then the unit will keep recording video in 3-minute clips, When the card is full, the unit will keep recording and overwrite the earliest unprotected minutes video file and so forth.

G-Sensor
The CE80A has a built-in Gravity sensor, In the event of a serious vehicle collision or rapid acceleration/deceleration, the G-sensor will be triggered and immediately lock the current video file so the file will not be overwritten by loop recording.

Parking Guard
The Parking Monitor is used to protect your car after parking, with this function on, after you stop the car and the unit turns off, it stays on standby, when the unit detects significant shock, it will automatically turn on and take a 20 seconds short video, then shut down automatically.
Video recorded under the parking monitor will be protected and will not be overwritten by loop recording.

Screen Saver
Set the time after which the unit will automatically turn off the screen. Used to save power and reduce distraction while driving. For example, it is set to 3 minutes, if the unit is not operated in 3 minutes, the unit will automatically turn off the screen while the recording is still working, any button operation or touch the screen will reactivate the screen display.

Voice Command
The CE80A features a Speech Recognition function. You can use the specified Speech Recognition to complete certain operations. With Speech RecognitionFunction on, the CE80A mirror will act by the command you said according to the user manual.

Toguard CE80A FAQs