Topdon ArtiLink600 OBD2 Scanner Code Reader Functioning Guide

 

Topdon ArtiLink600 OBD2 Scanner Code Reader

With the Topdon ArtiLink600 OBD2 Scanner Code Reader, you can unleash your car’s diagnostic potential. This multipurpose tool makes troubleshooting simple and precise. This scanner provides strong functionality to effectively decode car problems, making it perfect for both expert mechanics and do-it-yourself enthusiasts.

TOPDON ArtiLink600, the newest addition to the obd2 scanner series for 1996 and newer cars (OBDII & CAN), boasts a fully-featured list of tests and scans ranging from ABS & SRS Diagnostic Capabilities, Oil/SAS/BMS Reset Services, to comprehensive OBD2 tests, among others, making it highly-beneficial for experienced DIYs, automotive mechanics, and garage owners.

General Information of OBDII (On-Board Diagnostics II)

The OBDII system is designed to monitor emission control systems and key engine components by performing either continuous or periodic tests of specific components and vehicle conditions, which will offer three pieces of such valuable information:

• Whether the Malfunction Indicator Light (MIL) is commanded “on” or “off”;
• Which, if any, Diagnostic Trouble Codes (DTCs) are stored;
• Readiness Monitor status.

Operation Introduction

1. Preparation & Connection 1.1 Turn the ignition off.
   1. Locate the vehicle’s DLC socket.
   2. Plug the diagnostic cable into the vehicle’s DLC socket.
   3. Turn the ignition on. The engine can be off or running.
      1.5 ArtiLink600 will start initializing and entering the main menu interface.
2. ABS/SRS Systems Diagnosing
   This function is designed to diagnose the ABS (Anti-lock Brake System) and SRS (Supplemental Restraint System) systems:
3. Reset Services
   TOPDON ArtiLink600 features 3 most commonly used reset services for effective daily vehicle maintenance.
   1. Oil Reset
   2. Steering Angle Reset
4. OBDII/EOBD Diagnosing
   After the scanner is properly connected to the vehicle’s DLC, select [OBDII] in the main menu and press [OK]. The scanner will start an automatic check of the vehicle’s computer to determine which type of communication protocol the vehicle is using, and then establish a communication link.
   1. Read Codes
   2. Erase Codes
   3. I/M Readiness
   4. Data Stream
   5. View Freeze Frame
   6. O2 Sensor Test
   7. On-Board Monitor Test
   8. EVAP System Test
   9. Vehicle Info
5. Review
6. DTC Lookup
7. Print
8. Help
   This function enables you to view the scanner’s information and the OBD introduction.
9. Settings
10. Register & Update
    A computer that can access the Internet is required.
    1. Register
    2. Update

ArtiLink600 Scanner Safety Precautions

Warnings

• Always perform automotive testing in a safe environment.
• DO NOT smoke near the vehicle during testing.
• DO NOT place the code reader near the engine or exhaust pipe to avoid damage from high temperatures.
• DO NOT wear loose clothing or jewelry when working on an engine.
• DO NOT connect or disconnect any test equipment while the ignition is on or the engine is running.
• DO NOT disassemble the code reader.
• Engine parts will become hot when the engine is running. To prevent severe burns, avoid contact with hot engine parts.
• When an engine is running, it produces carbon monoxide, a toxic and poisonous gas. Operate the vehicle ONLY in a well-ventilated area.
• Wear safety eye protection that meets ANSI standards.

Cautions

• Please ensure that the vehicle battery is fully charged and the scanner is firmly connected to the vehicle DLC to avoid erroneous data generated by the scanner and diagnostic systems.
• Please do not use the code reader while driving.
• Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
• Keep the scanner dry, clean, and free from oil/water, or grease. Use a mild detergent on a clean cloth to clean the outside of the scan tool, when necessary.
• Keep the scanner out of the reach of children.

ArtiLink600 Scanner FAQs