Tuliyet Dash Cam Front and Rear User Manual

Tuliyet Dash Cam Front and Rear

Make use of the Tuliyet Dash Cam Front and Rear to record every moment while driving. With its dual cameras, this cutting-edge gadget can capture both the front and rear views at the same time, giving you complete coverage of your surroundings. Night vision, a wide-angle lens, and 1080p video quality are just a few of the features that make the Tuliyet Dash Cam guarantee clear footage day or night. It is an essential component for any car because of its small size and simple installation, which improves security and safety on every trip.

Tuliyet Dash Cam Specifications

Features of Tuliyet DashCam 

Key Features

1. Menu/ Camera / Playback
2. Power button
3. Down
4. Confirm button
5. Up
6. Front Camera
7. Microphone
8. Reset button
9. Holder in{interface}
10. Rear camera interface
11. Power interface
12. TF Card slot
13. Display screen
14. Inside camera(optional)
15. Turn night vision on/ off

Power button. short press to turn on off-screen. long press to switch on/off the device.
(M)Menu I camera/ playback button
Press the [OK] key to stop recording, press [ M) to enter photo mode, and press [ OK] to take a photo: In the camera mode, press ( Ml to enter playback mode, and press the [OK] key to playback. Lock function: In case of video recording, short press [ Ml for a key lock function to protect the current video file, and this file will not be covered by the cycle video
In video mode, long press (M] to enter video menu settings as follows.

Recorder Menu

In photo mode, long press [M] to enter photo menu settings as follows:

1. ( ►) Down key, short press ( ►) to select function al the Menu interface, short press button to turn on off sound record at the shoaling interface.
   ( ►)Up key. 1, short press (◄)to select function at the Menu interlace;
2. In the case of video recording. short press the OK button to pause, then short press the ◄ I button to switch front­inside view image (require inside view lens); 3, long press the (◄)button to switch front rear view image; 4. In the case of the front-rear view image. short press the OK button to pause, then short press the◄button to switch front-rear view image (require rear view lens)
   (OK] Confirm bullion, short press to confirm in the menu interface, short press to video record on off in the video mode.

Rearview lens (optional)

In the case of video recording, 4 4-pin plugs of the rearview lens insert an AV-in hole in the device, there’s a rear view image in the top right of the screen. that means connected successfully; short press the OK button to pause, long press the (◄) button to switch the front-rear view image, When hanging up the “R” gear, it will show the full image of the rear view
Note: This device can only support dual cameras to video record at the same time instead of 3 channels camera, that is front-inside camera or front-rear camera; if a rearview camera chooses the front-inside view mode, it will automatically indicate the full image of the car reversing visual when you hang up “R” gear, but won’t affect front-inside video record. also will automatically switch back front-inside view after cancel “R” gear.
As for the system update to support 3 channels of camera to video record at the same time, please prevail in kind and we’re sorry for no further notice.
Reset key ( RESET]
If the recorder crashes and accidental operation is not a normal fault, press ( RESET) to shut down the device. then press (OK) to reboot the device.

Tuliyet Dash Cam Installation 

1. Please test the rear view camera first. if it works well then install (package without rear view lens can be ignored).
2. Turn off the car engine.
3. The TF card inserts the recorder slot.
   [Note] Please use the high-speed TF card (Class 10 above), a capacity of not less than 4GB, TF card has maximum support of 128GB.
4. The recorder via a bracket fixed to the front windshield of the car.
5. Insert the car charger into the car cigarette lighter.
   [Note] When wiring. extend the charging line along the edge of the car door frame and carpet under the car.
6. Install the rear camera at the rear of the vehicle, and pay attention to the up and down direction. Wiring can be buried along the edge of the car roof laying. ( Note l There are two ways to install the rear camera.) Adsorbed on the glass above and behind the car. hands-on self-installation (Reversing visual function can not be achieved, only real-time recording of rear video).
   To find a professional installation staff installed on the license plate above the camera at the same time need to connect the power reversing lights (Reversing visual function can be achieved).
7. Adjust the lens position to ensure the best viewing angle.
8. Start the engine and check that the machine is operating properly.

Important Features

1. Use the automatic recording function Start the car engine, the recorder automatically starts to open the recording function.
2. Close the car engine, The recorder automatically saves the contents of the log and shuts down. recorded video segments are stored on the TF card When the TF card is full. the recorder will overwrite the oldest recorded image preferentially.
   (Note]
   a. The time segment of the record can be set to 1/2/3 minutes in the menu.
   b. The video is individually saved in the folder named ·oclMA” and “OCIMB. in TF card (package includes rear view lens).
3. Use motion detection
   In standby mode, enter the menu screen and open the motion detection mode. When the lens is sensitive to the peripheral area of a moving object. the state machine into the camera, recording 30 seconds after the system stops recording. To exit the motion detection mode, in standby mode enter the menu screen and close motion detection mode.
4. G-sensor
   The built-in gravity sensor (G-sensor), if serious vehicle collision. the recorder will lock the first 5 seconds and 10 seconds after the image date when the accident occurred while the bottom left of the display screen displays a lock icon; locked images will be saved as a special file, and the file will not be overwritten cycle.
   (note) Gravity sensor (G-Sensor)sensitivity adjustment support may actually need to change the setting in the setup menu according to their image.
5. The device has a key lock feature that will need to retain an image without being locked loop overwritten. In the video mode, a short press [Ml key logger will then lock the entire video image.
6. In shooting mode,
   Press the [ Ml key to enter the menu setting, find the date/time menu, short press the [ OK] button to confirm and return to the setup menu settings, and press the [Ml key to exit the menu setting.
   [note] In order to effectively record the date and time of traffic safety accident forensics, before using the menu setting.
7. File playback
   In the playback mode, press the {OK} key to playback. To exit playback mode,  press the MODE button again.
8. Reversing visual function
   First, you must connect the DVR to the car charger, the rear-view camera connects the reversing lights. Insert the car charger, the machine will automatically start recording status, screen switch R position in the recording mode automatically switches to the rear-view camera, and displays a reverse image. After reversing the visual machine automatically returns to video mode.
   Reminder: Please test the rearview camera is normal before installation.
9. Parking monitor(To achieve unattended surveillance video)
   To achieve this function must be connected to the machine in the case of electricity, in the main menu to open the motion detection and parking monitoring function, in the standby state of the vehicle under vibration or moving objects in front, the recorder according to G-sensor to sense automatically start the machine and automatically locks the video for 30 seconds, and automatically save the video file, the video 30 seconds after 5 seconds without the operation will automatically shut down.
   [note] This function is only used when stopping. Please turn off the motion detection and stop monitoring function during normal driving.

Install the APP and connect to WiFi

1. Press OK at the bottom of the recorder to stop recording
2. Long press the M key to display the menu
3. Tap the M button to change to the menu, select Wifi Control in the menu and turn it on.
4. In the cell phone settings page, connect the car recorder’s wifi ACTION CAM60def40f5fb0. WiFi Password: 12345678
5. After a successful connection, open the APP to use it.

FAQs of Tuliyet Dash Cam