Viper 3105V Security System With Keyless Entry User Manual
The Viper 3105V Security System with Keyless Entry is a big advancement in car security technology. This system combines the ease of keyless entry with cutting-edge security features to provide both convenience and peace of mind. To discourage would-be thieves, the Viper 3105V is outfitted with several security features, including as shock sensors, door and trunk triggers, and a loud alarm. Convenience is increased by the keyless entry option, which enables customers to remotely lock and unlock their vehicles. This is especially helpful while hauling stuff or in bad weather. This system’s sleek remote and simple controls make it incredibly user-friendly. Many drivers find it to be a versatile option because of its installation compatibility with a broad range of car models. The Viper 3105V is a strong security option that blends excellent car protection with the usefulness of keyless access.
How to Use Viper 3105V
There are various essential tasks involved in using the Viper 3105V Security System with Keyless Entry.
Here’s a brief usage guide for it:
- Setting Off the Alarm:
Press the key fob’s lock button to arm the system. The parking lights will flash once and make a chirping sound to inform you that the alarm is activated. - If your doors are linked to the system, it will also lock them.
- Turning Off the Alarm:
To disarm the system, press the key fob’s unlock button. There will be two chirping noises and two flashes of the parking lights. This opens your doors as well. - Disarm/Silent Arm:
The auxiliary button, which is typically represented by a star, should be pressed before the lock or unlock button if you wish to arm or disarm the device silently. - Fear Mode:
You can manually set off the alarm in an emergency by pressing the lock button for a brief period. This sounds the car’s horn and sets off the alarm. - In Valet Mode:
You can use valet mode to stop the alarm from arming. This is helpful when servicing your automobile or handing it over to a valet. Valet mode is often accessed by pushing the valet button (found within the vehicle) and turning the ignition key to the “on” position. - Release of the trunk:
If your car’s trunk is linked to your system, you can open the trunk by pushing the designated trunk release button on the remote control or the auxiliary button. - Modifying the Sensitivity of Sensors:
Usually, the sensitivity of the shock sensor can be changed. For further instructions, refer to your manual as it frequently requires a series of keystrokes and button presses. - Replacing the remote’s battery:
Replace the remote key fob battery if it is weak by gently opening the fob and putting in a fresh one, making that the polarity is right. - Verifying the Status of the System:
The system’s status may be displayed on some models’ LED indicators. For information on particular light indicators, consult your handbook. - Troubleshooting:
Refer to your manual’s troubleshooting section if you run into problems. Common problems might be the remote not working or the alarm going off without warning.
Recall that the particular features and methods of operation may differ slightly based on the Viper 3105V model you own and the way it was installed in your car. The user manual for your particular model is the best source of comprehensive instructions and safety data. It is advisable to speak with a qualified installer or get in touch with Viper customer care if you have any questions regarding any functionality.
1-way remote control
Control Center
The Control Center, is typically located on the upper part of the front windshield.
It consists of:
- The In-vehicle system antenna.
- The Status LED, as a visual indicator of the system’s status.
- The Control button, for placing the system into Valet Mode* and performing the Emergency Override* operation.
See Valet Mode and Disarming without a Transmitter in the “Using your System” section of this guide.
Remote control command table
Three-button remote configuration
This may be used with an optional 3-button remote, which is available for purchase through your authorized Directed dealer. The table below describes the basic 3-button functions. 
FAQs of Viper 3105V
The Viper 3105V is an advanced vehicle security system that offers both alarm and keyless entry features, designed to provide enhanced security and convenience for your vehicle.
Yes, it includes keyless entry capabilities, allowing you to lock and unlock your car doors remotely.
It is compatible with most vehicles, but it’s advisable to check compatibility with your specific vehicle model before purchasing.
The alarm system is triggered by shocks, door or trunk opening, and has a loud siren to deter theft or unauthorized entry.
Installation complexity can vary based on the vehicle. It’s often recommended to have it installed by a professional.
Yes, it comes with a remote control for operating the alarm and keyless entry functions.
The basic 3105V model does not include GPS tracking. It focuses on alarm and keyless entry features.
The basic 3105V model does not have smartphone integration. Higher-end Viper models may offer this feature.
Warranty terms can vary, so it’s best to check with the retailer or manufacturer for specific warranty information.
The 3105V model primarily focuses on security and keyless entry. Remote start may be available in other Viper models.
Yes, the alarm is designed to be loud and can typically be heard from a considerable distance.
This depends on the specific model and configuration. Some systems allow for additional sensors.
Battery life varies based on usage, but typically the remote battery can last several months to a year.
It is designed to be tamper-resistant, but like any security system, it is not completely infallible.
It can be configured for passive arming, which locks the car automatically, but this feature may need to be enabled.