VTOMAN X1 Car Jump Starter User Manual
The VTOMAN X1 Car Jump Starter, introduced in March 2024, can jump-start at 2500A. This small device helps drivers start engines quickly and reliably in emergencies. Its 20,000mAh battery allows several jump starts and USB charging.
Product Parts and Functions Description
Operation Instructions
Battery Power:
Press the power button to check the battery power:
The battery icon will blink one by one during the period of charging. Different bars of battery icon show different battery power, the battery icon becomes 4 bars when the charging process was finished.
How to Charge the V Xl
This unit can be charged with the type-c cable and wall charger(wall charger Not Included).
How to Start a 12V Vehicle
{Make sure the battery power? 2 bars)
Note: Do not press the “BOOST” button on the jumper cable before connecting the vehicle battery correctly.
- Connect the vehicle battery
- Green LED illuminates (solid)
- Start the vehicle engine.
Check the LED indicator on the jumper cable and follow the instructions as below:
If any problem persists, stop using the jump starter and contact our service team directly at support@vtoman.com, we will do our best to solve the problem within 24 hours.
Steps to Use the Air Inflator
Power on, short press the “M” key to start to set the air inflator.
Note: The data is only for reference.
- Press the “M” key once, and the icon on the far left flashes, and then press the “+” or “-” keys to switch between the “basketball”, “bicycle”, “car” and “SUV” icons.
- Press the “M” key twice, and the pressure unit icon flashes, and then press the “+” or “-” keys to switch between “BAR”, “PSI”, and “KPA”.
- Press the “M” key again, the current target pressure value flashes, and then press the “+” or”-” keys to adjust the target pressure value.
- After selecting the inflating mode, the inflation function can be turned on by short pressing the power switch key once.
How to Turn On/Off the LED Flashlight
Simply press the button once to tum on the LED light function, each time you press the button to switch the light mode, there are three light modes for you to choose. {Normal, Strobe, SOS)
How to Turn this unit on and off
Press and hold the power button for two seconds to turn on the device, and press and hold the power button again for two seconds to turn off the device. Also, when the device is not in use, it will automatically shut down in 30 seconds.
Toxic and Harmful Substances
The composition and amount of toxic or harmful substances in this product
0: Indicate that the content of harmful substances in all homogeneous materials is all lower than the prescribed limit of MCV (the standard 2002/95/EC/RoHs)
Package Content
Technical Specification
FAQ
- What is the operating temperature of this unit and how to store it?
- A: This unit is lithium polymer battery, operating temp is -20 60 °C/ -4-140°F. If the ambient temperature is higher than 60°C/140°F, the internal construction of the battery cells may be damaged, it may swell and become unsafe. So don’t store the device in vehicle which parked in hot weather for long periods of time.
- How to start a vehicle with this unit?
- A: Please refer to the instructions about “How to Start a 12V Vehicle”.
- How do you know if this unit is connected to the vehicle correctly?
- A: With the battery clamps connected to the vehicle battery, when the LED indicator on the jumper cable shines a steady green light, it means it’s connected correctly. If red light illuminates (solid) with beeping, it means it’s reverse connection.
-
What should I do if this unit can’t start a vehicle?
-
A: Recharge this unit fully, and try to press the “BOOST” button on the jumper cable after connecting the vehicle battery correctly, the LED indicator illuminates steady green light, then start the vehicle within 30s. If it still does not work, contact us at: support@toman.com (Attach your order ID).
-
-
What should I do if this unit can’t charge up?
-
A: Charge it with a usb-c cable and wall charger for a full overnight period. If it still does not work, contact us at: support@vtoman.com ( Attach your order ID).
-
-
What should I do if this unit can’t charge other devices?
-
A: Try to charge the device with another charging cable, If it works, which means the charging cable we provided is defective, we will provide you a new one; If it still does not work, please email us at: support@vtoman.com ( Attach your order ID).
-
-
Can this unit charge other devices while it is being charged?
-
A: Yes.
-
- Can this product charge other devices while starting a vehicle?
- A: No.
- How often does this unit need to be recharged?
- A: It would be best to recharge it every 3 months.
- Why did it shut off in the 30s when charging other devices?
- A. This unit may shut off automatically when charging for devices that need light charging current, such as headphones, smart watches, etc since there is a minimum load current limitation (200mA) on this unit, it will be automatically off after 30 if the load current is less than 200mA.