2022 Chevrolet Malibu Fuses and Fuse Box | How to replace fuses
The 2022 Chevrolet Malibu has a full electrical system that makes sure all of its parts work properly. The fuse box is an important part of this system that keeps the electrical lines safe from overloading and damage. There are many fuses in the fuse box. Each one protects a different circuit, like the ones for the lights, power windows, or the radio. The matching fuse is meant to break the circuit if there is an electrical overload or a broken part. This stops any more damage from happening.
If you need to change a switch in your 2022 Chevrolet Malibu, the process is usually pretty easy. Usually, the fuse box is placed somewhere easy to get to, like inside the car or in the engine room. Start by looking in the owner’s guidebook to find the fuse that is connected to the broken part. A fuse puller tool or a pair of needle-nose pliers can be used to quickly remove the bad fuse once it has been found. Once the old fuse is out, a new one with the same amperage number should be put in its place.
It’s important to be careful during this process and stick to the recommended amperage rates since using the wrong fuse can damage the electrical system. The 2022 Chevrolet Malibu’s electrical parts run smoothly thanks to regular maintenance and timely switch replacement. This gives drivers a reliable and efficient driving experience. Always look at the guidebook for your car to get clear instructions and rules that are specific to that model.
2024 Chevrolet MALIBU Specs, Price, Features, Mileage (Brochure)
Electrical System
High Voltage Devices and Wiring
Warning
Exposure to high voltage can cause shock, burns, and even death. The high-voltage components in the vehicle can only be serviced by technicians with special training.
High-voltage components are identified by labels. Do not remove, open, take apart, or modify these components. High voltage cable or wiring has orange covering or labels. Do not probe, tamper with, cut, or modify high-voltage cables or wiring.
Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems.
Fuses and circuit breakers protect power devices in the vehicle.
If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed. Choose some feature of the vehicle that is not needed to use and replace it as soon as possible.
To check a fuse, look at the band inside the fuse. If the band is broken or melted, replace the fuse. Be sure to replace a bad fuse with a fuse of identical size and rating.
Replacing a Blown Fuse
- Turn off the vehicle.
- Locate the fuse puller in the engine compartment fuse block.
- Use the fuse puller to remove the fuse from the top or side, as shown above.
- If the fuse must be replaced immediately, borrow a replacement fuse with the same amperage from the fuse block. Choose a vehicle feature that is not needed to safely operate the vehicle. Repeat Steps 2-3.
- Insert the replacement fuse into the empty slot of the blown fuse.
At the next opportunity, see your dealer to replace the blown fuse.
Headlamp Wiring
An electrical overload may cause the lamps to go on and off, or in some cases to remain off. Have the headlamp wiring checked right away if the lamps go on and off or remain off?
Windshield Wipers
If the wiper motor overheats due to heavy snow or ice, the windshield wipers will stop. The wiper function is available immediately after the wiper switch is set to off, and back to on. To protect the wiper motor from overheating, the wipers may slow down when the windshield is dry for a long period. If a period of dry operation, or little moisture, exceeds 10 minutes, the wipers may switch to intermittent operation, and remain there. When moisture is again detected on the windshield, wiper operation will return to the operator-selected speed.
Although the circuit is protected from electrical overload, overload due to heavy snow or ice may cause wiper linkage damage. Always clear ice and heavy snow from the windshield before using the windshield wipers.
If the overload is caused by an electrical problem and not snow or ice, be sure to get it fixed.
Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of damage caused by electrical problems.
Danger
Fuses and circuit breakers are marked with their ampere rating. Do not exceed the specified amperage rating when replacing fuses and circuit breakers. The use of an oversized fuse or circuit breaker can result in a vehicle fire. You and others could be seriously injured or killed.
Warning
Installation or use of fuses that do not meet GM’s original fuse specifications is dangerous. The fuses could fail, and result in a fire. You or others could be injured or killed, and the vehicle could be damaged.
See Accessories and Modifications 0 228 and General Information 0 228.
To check or replace a blown fuse, see Electrical System Overload 0 253.
Engine Compartment Fuse Block
The engine compartment fuse block is on the driver’s side of the engine compartment. There is a fuse puller in the engine compartment fuse block. It can be used to easily remove fuses from the fuse block.
Caution
Spilling liquid on any electrical component of the vehicle may damage it. Always keep the covers on any electrical component.
The vehicle may not be equipped with all of the fuses, relays, and features shown.
| Fuses | Usage |
| 1 | – |
| 2 | – |
| 3 | Antilock Brake System Pump/Electric Brake Booster |
| 5 | – |
| 6 | Rear Closure |
| 7 | – |
| 8 | Memory Seat Module |
| 9 | – |
| 10 | – |
| 11 | DC-DC Converter 1 |
| 12 | Rear Window Defogger |
| 13 | Heated Mirrors |
| 14 | – |
| 15 | Passive Entry/Passive Start |
| 16 | Front Wiper |
| 17 | Passenger Power Seat |
| 18 | Antilock Brake System Valve |
| 19 | Driver Power Seat |
| 21 | Sunroof |
| 22 | Parking Lamp |
| 23 | Automatic Headlamp Leveling/Adaptive Forward Lighting |
| 24 | – |
| 26 | Transmission Control Module/Ignition |
| 27 | Instrument Panel/Body/ Ignition |
| 28 | – |
| 29 | Rear Vision Camera/ Ventilated Seats |
| 30 | Malfunction Indicator Lamp/Ignition |
| 32 | Canister Vent Solenoid/ Evap Leak Check Module |
| 33 | Front Heated Seat |
| 34 | – |
| 35 | Body Control Module 6/ Body Control Module 7 |
| 36 | Fuel Module |
| 38 | – |
| 39 | – |
| 40 | Steering Column Lock |
| 41 | – |
| 43 | Heated Steering Wheel |
| 44 | Headlamp Leveling |
| 45 | – |
| 46 | Engine Control Module/ Ignition |
| 47 | – |
| 48 | – |
| 49 | DC-DC Converter 2 |
| 50 | – |
| 51 | – |
| 52 | – |
| 53 | – |
| 54 | – |
| 55 | – |
| 56 | Starter Motor |
| 57 | – |
| 58 | – |
| 59 | High Beam Headlamps Left/Right |
| 60 | Cooling Fan |
| 61 | – |
| 62 | – |
| 63 | – |
| 65 | Air Conditioning |
| 67 | – |
| 68 | – |
| 69 | – |
| 70 | – |
| 72 | Starter Pinion |
| 74 | – |
| 75 | Engine Control Module Main |
| 76 | Engine Control Module Sense |
| 78 | Horn |
| 79 | Washer Pump |
| 81 | Transmission Control Module/Engine Control Module |
| 82 | – |
| 83 | Ignition Coil |
| 84 | Powertrain On Engine |
| 85 | Shunt |
| 86 | Shunt |
| 87 | – |
| 88 | Aeroshutter |
| 89 | – |
| 91 | – |
| 92 | – |
| 93 | Automatic Headlamp Leveling |
| 95 | – |
| 96 | – |
| 97 | – |
| 99 | Coolant Pump |
| Relays | Usage |
| 4 | – |
| 20 | Rear Window Defogger |
| 25 | Front Wiper Control |
| 31 | Run/Crank |
| 37 | Front Wiper Speed |
| 42 | – |
| 64 | Starter Motor |
| 66 | Powertrain |
| 71 | – |
| 73 | Air Conditioning |
| 80 | Starter Pinion |
| 90 | – |
| 94 | – |
| 98 | – |
Instrument Panel Fuse Block
The instrument panel fuse block is on the driver’s side of the instrument panel. To access the fuses:
- Pull out at the center of the right edge, and swing the cover out and to the left.
- Remove the cover.
2024 Chevrolet MALIBU Specs, Price, Features, Mileage (Brochure)
To reinstall the cover, line up the tabs on the left edge, and press the cover into place.
The vehicle may not be equipped with all of the fuses, relays, and features shown.
| Fuses | Usage |
| F1 | Left Power Windows |
| F2 | Right Power Windows |
| F3 | – |
| F4 | Heating, Ventilation, and Air Conditioning Blower |
| F5 | Body Control Module 2 (Without Stop/Start Option) |
| F6 | Left Rear Heated Seat |
| F7 | Right Rear Heated Seat |
| F8 | Body Control Module 3 |
| F9 | – |
| F10 | Body Control Module 2 (With Stop/Start Option) |
| F11 | – |
| F12 | – |
| F13 | – |
| F14 | – |
| F15 | Transmission Control Module (With Stop/Start Option) |
| F16 | Amplifier |
| F17 | Seat Power Lumbar |
| F18 | – |
| F19 | – |
| F20 | Body Control Module 1 (Without Stop/Start Option) |
| F21 | Body Control Module 4 |
| F22 | – |
| F24 | Sensing and Diagnostic Module/Automatic Occupant Sensing (Airbag) |
| F25 | Data Link Connector |
| F26 | – |
| F27 | AC DC Inverter |
| F28 | – |
| F29 | Body Control Module 8 |
| F30 | Overhead Console |
| F31 | Steering Wheel Controls |
| F32 | – |
| F33 | Heating, Ventilation, and Air Conditioning |
| F34 | Central Gateway Module |
| F35 | – |
| F36 | Wireless Charger/USB Charger |
| F37 | – |
| F38 | OnStar |
| F39 | Display |
| F40 | Obstacle Detection |
| F41 | Body Control Module 1 (With Stop/Start Option) |
| F42 | Radio |
| F43 | – |
| F44 | Console Accessory Power Outlet – Rear |
| Relays | Usage |
| K1 | – |
| K2 | Interruptible Retained Accessory Power |
| K3 | – |
| K4 | – |
| K5 | – |
FAQs
The fuse box in the 2022 Chevrolet Malibu is typically located in the engine compartment or under the dashboard on the driver’s side.
There are usually two fuse boxes in the 2022 Chevrolet Malibu – one in the engine compartment and one inside the cabin.
Fuse colors often indicate the amp rating of the fuse. It’s crucial to replace a blown fuse with one of the same amp rating to prevent electrical issues.
Visually inspect the fuses for a broken filament, or use a multimeter to check for continuity.
No, it’s essential to replace a blown fuse with one of the same amp rating to avoid electrical problems or damage.
Typically, you’ll only need a fuse puller or a pair of needle-nose pliers.
The vehicle may come with spare fuses, but it’s advisable to keep a variety of replacements on hand.
Usually involves removing a cover or panel.
For most fuses, disconnecting the battery may not be necessary. However, it’s a good practice to disconnect it when working on the electrical system.
Issues such as a short circuit, faulty wiring, or malfunctioning components can cause blown fuses.
Ensure the vehicle is turned off, and if necessary, disconnect the battery to avoid electrical shock or damage.
Insert the fuse puller over the blown fuse, squeeze gently, and pull the fuse straight out. Then, insert the new fuse in the same slot.
Yes, replacing a fuse is a relatively simple task that can be done by following the instructions in the owner’s manual.
Generally, there’s no specific order. However, it’s wise to start with the fuses related to the problematic system.
Yes, if you’re unable to diagnose or fix the problem, seeking assistance from a professional mechanic or dealership is recommended.
Useful Link:
View Full PDF: 2022 Chevrolet Malibu User Manual | Auto User Guide
2024 Chevrolet MALIBU Specs, Price, Features, Mileage (Brochure)
2022 Chevrolet Malibu Instrument Cluster Dashboard | How to use