2022 Chevrolet Spark 1500 Display Screen | Warning Messages Guide

In the 2022 Chevrolet Spark 1500, a new kind of display screen is used as the main place for information and control inside the car. A bright 1500-pixel display screen is at the heart of this system. It gives drivers an easy way to reach different features and functions. From navigation to entertainment, the display screen makes it easy to use technology that makes driving more enjoyable. In addition, the screen is used to show important warnings, so drivers are always aware of any problems or alerts that might happen while they’re driving. The 2022 Chevrolet Spark 1500’s display screen changes the way drivers feel safe and comfortable with its easy-to-use layout and wide range of features.

2023 Chevrolet Traverse Review, Price, Features And Mileage (Brochure)

Information Displays

Driver Information Center (DIC)
The DIC displays information about the vehicle. It also displays warning messages if a system problem is detected. All messages appear in the DIC display in the instrument cluster.

DIC Operation and Displays
On some models, the trip odometer reset stem is used to operate the DIC. In other models, the controls for the DIC are on the turn of the signal lever.

DIC Buttons

1. SET/CLR: Press to set or clear the menu item displayed.
2. w /x: Turn the band to scroll through the menus.
3. MENU: Press to display the Trip/Fuel menu and the Vehicle Information menu. This button is also used to return to or exit the last screen displayed on the DIC.

Vehicle Information Menu Items (Base Level DIC)
Press MENU to view the DIC menu. Some items are displayed in the upper display area, some in the lower display area, and others use both the upper and lower display areas. Use w /x to scroll through the menu items. Not all items are available on every vehicle. The following is a list of possible menu items:

• Remaining Oil Life
• Units
• Tire Learn

Remaining Oil Life
This menu is not available while the vehicle is moving. This display shows an estimate of the oil’s remaining useful life. If 99:% is displayed, that means 99% of the current oil life remains.

When the remaining oil life is low, the CHANGE message will appear on the display. The oil should changed as soon as possible. See Engine Oil 0 164. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended. See Maintenance Schedule 0 226.
Remember, the Oil Life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset, see Engine Oil Life System 0 166.

Units
This menu is not available while the vehicle is moving. Press SET/CLR while the unit
display is active and move w / x to change units when UNIT SET is displayed. Press SET/CLR to confirm the setting. Select 1, 2, or 3 for the unit display. 1 is metric units, 2 is Imperial units, and 3 is US units. This will change the displays on the cluster and DIC to the type of measurements selected.

Tire Learn
This display allows for the matching of the TPMS sensors. The display will show a vehicle with the approximate pressures of all four tyres. Tire pressure is displayed in either kilopascal (kPa) or pounds per square inch (psi). See Tire Pressure Monitor System 0 195 and
Tire Pressure Monitor Operation 0 196.

Trip/Fuel Menu Items (Base Level DIC)
Press MENU until the Trip/Fuel menu is displayed. Use w /x to scroll through the menu items. On some models, use the trip odometer reset stem to scroll through the menu. Not all items are available on every vehicle. The following is a list of possible menu items:

• Trip Odometer
• Fuel Range
• Average Vehicle Speed
• Instantaneous Fuel Economy
• Average Fuel Economy
• Timer

Trip Odometer
This display shows the current distance travelled, in either kilometres (km) or miles (mi), since the last reset for the trip odometer. The trip odometer can be reset to zero by pressing SET/CLR or pressing and holding the trip odometer reset stem while the trip odometer display is showing.

Fuel Range
This display shows the approximate distance the vehicle can be driven without refuelling. The fuel range estimate is based on an average of the vehicle’s fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. The fuel range cannot be reset.

Average Vehicle Speed
This display shows the average speed of the vehicle in kilometres per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing SET/CLR or pressing and holding the trip odometer reset stem while the Average Vehicle Speed display is showing.

Instantaneous Fuel Economy
The instantaneous fuel economy display shows the current fuel economy in litres per 100 kilometres (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy that the vehicle has right now and changes frequently as driving conditions change. This display cannot be reset.

Average Fuel Economy
This display shows the approximate average litres per 100 kilometres (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now and will change as driving conditions change. The fuel economy can be reset by pressing SET/CLR or pressing and holding the trip odometer reset stem while the Average Fuel Economy display is showing.

Timer
Available on some vehicles, this display can be used as a timer. To start the timer, press SET/CLR while the Timer is displayed. The display will show the amount of time that has passed since the timer was last reset, not including the time the ignition is off. Time will continue to be counted as long as the ignition is on, even if another display is being shown on the DIC. The timer will record up to 9 hours, 59 minutes, and 59 seconds (9:59:59) after which the display will return to zero. To stop the timer, press SET/CLR briefly while the Timer is displayed. To reset the timer to zero, press and hold SET/CLR.

Trip/Fuel Menu Items (Uplevel DIC)
Press MENU until the Trip/Fuel menu is displayed. Use w /x to scroll through the menu items. Not all items are available on every vehicle. The following is a list of possible menu items:

• Digital Speedometer
• Trip 1
• Trip 2
• Fuel Range
• Instantaneous Fuel Economy
• Average Fuel Economy
• Average Vehicle Speed
• Timer

Digital Speedometer
The digital speedometer, available on some vehicles, shows how fast the vehicle is moving in either kilometres per hour (km/h) or miles per hour (mph). The speedometer cannot be reset.

Trip 1 and Trip 2
This display shows the current distance travelled, in either kilometres (km) or
miles (mi), since the last reset for the trip odometer. The trip odometer can be reset to zero by pressing SET/CLR while the trip odometer display is showing.

Fuel Range
This display shows the approximate distance the vehicle can be driven without refuelling. The fuel range estimate is based on an average of the vehicle’s fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. The fuel range cannot be reset.

Instantaneous Fuel Economy
The instantaneous fuel economy display shows the current fuel economy in litres per 100 kilometres (L/100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy that the vehicle has right now and changes frequently as driving conditions change. Unlike the average economy, this display cannot be reset.

Average Fuel Economy
This display shows the approximate average litres per 100 kilometres (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now and will change as driving conditions change. The fuel economy can be reset by pressing SET/CLR while the Average Fuel Economy display is showing.

Average Vehicle Speed
This display shows the average speed of the vehicle in kilometres per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing SET/CLR while the Average Vehicle Speed display is showing.

Timer
Available on some vehicles, this display can be used as a timer. To start the timer, press SET/CLR while the Timer is displayed. The display will show the amount of time that has passed since the timer was last reset, not including the time the ignition is off. Time will continue to be counted as long as the ignition is on, even if another display is being shown on the DIC. The timer will record up to 99 hours, 59 minutes, and 59 seconds (99:59:59) after which the display will return to zero. To stop the timer, press SET/CLR briefly while the Timer is displayed. To reset the timer to zero, press and hold SET/CLR.

Vehicle Information Menu Items (Uplevel DIC)
Press MENU on the turn signal lever until the Vehicle Information menu is displayed. Use w /x to scroll through the following possible menu items:

• Display Units
• Tire Pressure
• Remaining Oil Life

Display Units
Move w /x to switch between metric or US when the Unit display is active. Press SET/CLR to confirm the setting. This will change the displays on the cluster and DIC to either metric or English (US) measurements.

Tire Pressure
The display will show a vehicle with the approximate pressures of all four tyres. Tire pressure is displayed in either kilopascal (kPa) or pounds per square inch (psi). See Tire Pressure Monitor System 0 195 and Tire Pressure Monitor Operation 0 196.

Remaining Oil Life
This menu is not available while the vehicle is moving. This display shows an estimate of the oil’s remaining useful life. If REMAINING OIL LIFE 99 % is displayed, that means 99%of the current oil life remains.
When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. The oil should changed as soon as possible. See Engine Oil 0 164. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended. See Maintenance Schedule 0 226.
Remember, the Oil Life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset, see Engine Oil Life System 0 166.

Vehicle Messages

Vehicle Messages (Base Level Cluster)
DIC messages display when the status of the vehicle has changed and action may be needed to correct the condition. Multiple messages appear one after another. All messages should be taken seriously. On the base-level cluster, vehicle messages appear as code numbers. Some of these codes may appear along with the service vehicle soon light and the owner’s manual symbol in the DIC display.

1. No Remote Detected, Press the Clutch To Restart
2. A/C Off Due to High Engine Temp
3. Steering Column Is Locked
4. Turn the Steering Wheel, Turn the Key Off, Then On
5. Turn the Steering Wheel, Start the Vehicle Again
6. Brakes Overheated
7. Check High Mounted Brake Lamp
8. Check Brake Lamps
9. Headlamp Leveling Malfunction —Contact Service
10. Left Low Beam Failure
11. Right Low Beam Failure
12. Check the Left Position Lamp
13. Check Right Position Lamp
14. Reversing Lamp Failure
15. License Plate Lamp Failure
16. Left Front Turn Indicator Failure
17. Left Rear Turn Indicator Failure
18. Right Front Turn Indicator Failure
19. Right Rear Turn Indicator Failure
20. Replace Battery In the Remote Key
21. Lane Departure Warning Unavailable
22. Change Timing Belt – See Owner’s Manual
23. Tighten Gas Cap
24. Open, Then Close the Driver Window
25. Theft Attempted
26. Service Theft Alarm
27. Service Steering Column Lock
28. Service Power Steering, Drive with Care
29. Service Front Camera
30. Engine Oil Low – Add Oil
31. Service Transmission
32. Engine Power Is Reduced
33. Use the Transmitter Pocket to Start
34. Service Vehicle Soon
35. No Remote Detected
36. No Remote Detected, Press Brake To Restart
37. Press the Button Again To Turn the Engine Off
38. Shift to Park
39. Service Airbag
40. Low Battery
41. Park Assist Off

Engine Oil Messages CHANGE
This message displays when the engine oil needs to be changed. When changing the engine oil, be sure to reset the Oil Life System. See Engine Oil Life System 0 166, Engine Oil 0 164, and Maintenance Schedule 0 226.

2023 Chevrolet Traverse Review, Price, Features And Mileage (Brochure)

Vehicle Messages (Uplevel Cluster)

Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may appear one after another.
The messages that do not require immediate action can be acknowledged and cleared by pressing SET/CLR. The messages that require immediate action cannot be cleared until that action is performed.
All messages should be taken seriously; clearing the message does not correct the problem.
If a SERVICE message appears, see your dealer. Follow the instructions given in the messages. The system displays messages regarding the following topics:

• Service Messages.
• Fluid Levels
• Vehicle Security
• Brakes
• Steering
• Ride Control Systems
• Driver Assistance Systems
• Cruise Control
• Lighting and Bulb Replacement. Wiper/Washer Systems
• Doors and Windows
• Seat Belts
• Airbag Systems
• Engine and Transmission
• Tire Pressure
• Battery

Engine Power Messages

ENGINE POWER IS REDUCED
This message displays when the vehicle’s propulsion power is reduced. A reduction in propulsion power can affect the vehicle’s ability to accelerate. If this message is on, but there is no observed reduction in performance, proceed to your destination. Under certain conditions, the performance may be reduced the next time the vehicle is driven. The vehicle may be driven while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on or displays repeatedly, the vehicle should be taken to your dealer for service as soon as possible.
Under certain operating conditions, propulsion will be disabled. Try restarting after the ignition has been off for 30 seconds.

Vehicle Speed Messages

SPEED LIMITED TO XXX KM/H (MPH)
This message shows that the vehicle speed has been limited to the speed displayed. The limited speed is protection for various propulsion and vehicle systems, such as lubrication, thermal, brakes, suspension, Teen Driver if equipped, or tyres.

 

FAQs

Useful Links

View Full PDF: 2022 Chevrolet Spark 1500 User Manual | Auto User Guide

2023 Chevrolet Traverse Review, Price, Features And Mileage (Brochure)

Fuse Diagram And Relay: 2022 Chevrolet Spark 1500 Fuses Guide