2023 Chevrolet Bolt EV Alarm System Guidelines
The 2023 Chevrolet Bolt EV is a symbol of innovation and sustainability in the ever-changing landscape of electric automobiles. Aside from its outstanding electric range and cutting-edge technology, the Bolt EV now includes a sophisticated Alarm System that elevates your ownership experience to a whole new level. Consider a car that not only improves your daily travel but also emphasizes your safety and security. The 2023 Chevrolet Bolt EV Alarm System was created with one objective in mind: to provide you complete peace of mind, ensuring that your electric trip is both pleasurable and worry-free.
The 2023 Chevrolet Bolt EV Alarm System is more than simply an enhancement in security; it’s a dedication to your safety and peace of mind. Whether you’re navigating the urban jungle or going on a cross-country trip, you can count on Chevrolet to protect what matters most: your Bolt EV and your unshakeable faith in exploring the electric future. Welcome to the automotive security of the future. Welcome to the Chevrolet Bolt EV Alarm System for 2023.
Rear Window Wiper/Washer
The controls are on the end of the windshield wiper lever.
Move the control to:
ON : To turn on.
OFF : To turn off.
INT : To turn on intermittent rear wipes.
Push the windshield wiper lever forward to spray washer fluid on the rear window. If equipped with the rear camera mirror, the washer fluid is sprayed on the rear camera at the same time. The lever returns to its starting position when released.
Warning
In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision.
Auto Wipe in Reverse Gear
If the rear wiper control is off, the rear wiper will automatically operate continuously when the vehicle is in R (Reverse), and the front windshield wiper is performing low or high speed wipes.
If the rear wiper control is off, the vehicle is in R (Reverse), and the front windshield wiper is performing intermittent wipes, then the rear wiper automatically performs intermittent wipes.
This feature can be turned on or off. Go to Settings > Vehicle > Comfort and Convenience > Auto Wipe in Reverse Gear > Select ON or OFF.
The windshield washer reservoir is used for the windshield and the rear window. Check the fluid level in the reservoir if either washer is not working.
Rear Wiper Arm Assembly Protection
Wiper operation returns to normal when the shift switch is no longer in N (Neutral) or the vehicle speed increases. The rear wiper will also stop when the liftgate is open.
When using an automatic car wash, move the rear wiper control to OFF to disable the rear wiper. If the shift switch is in N (Neutral) and the vehicle speed is very slow, the rear wiper will automatically stop at the base of the rear window.
Compass
The vehicle has a compass display in the instrument cluster above the speedometer.
The compass receives its heading and other information from the Global Positioning System (GPS) antenna and vehicle speed information.
The compass system has automatic calibration and zone adjustment features.
Avoid covering the GPS antenna for long periods of time with objects that may interfere with the antenna’s ability to receive a satellite signal. The compass system is designed to operate for a certain number of miles or degrees of turn before needing a signal from the GPS satellites. The compass system will automatically determine when a GPS signal is restored and provide a heading.
Clock
Set the time and date using the infotainment system.
Power Outlets
The accessory power outlet can be used to plug in electrical equipment, such as a mobile phone or MP3 player. The accessory power outlet only works with the vehicle turned on.
The vehicle has an accessory power outlet on the lower center stack below the climate control.
Open the cover to access and replace when not in use.
Caution
Leaving electrical equipment plugged in for an extended period of time while the vehicle is off will drain the battery. Always unplug electrical equipment when not in use and do not plug in equipment that exceeds the maximum 20 amp rating.
Certain accessory power plugs may not be compatible with the accessory power outlet and could overload vehicle or adapter fuses.
If a problem is experienced, see your dealer.
When adding electrical equipment, be sure to follow the proper installation instructions included with the equipment.
Caution
Hanging heavy equipment from the power outlet can cause damage not covered by the vehicle warranty. The power outlets are designed for accessory power plugs only, such as cell phone charge cords.
Wireless Charging
If equipped and enabled, the vehicle has wireless charging in the bin below the climate control system. The system operates at 145 kHz and wirelessly charges one 
compatible smartphone. The power output of the system is capable of charging at a rate up to 3 amp (15 W), as requested by the compatible smartphone.
Warning
Wireless charging may affect the operation of an implanted pacemaker or other medical devices. If you have one, it is recommended to consult with your doctor before using the wireless charging system.
The vehicle must be on or Retained Accessory Power (RAP) must be active. The wireless charging feature may not correctly indicate charging when the vehicle is in RAP, or during Bluetooth phone calls. .
The operating temperature is −40 °C (−40 °F) to 85 °C (185 °F) for the charging system and 0 °C (32 °F) to 35 °C (95 °F) for the phone.
A charging stopped alert may be displayed on the infotainment screen, if the wireless charger or smartphone are outside of normal operating temperature. Charging will automatically resume when a normal operating temperature is reached.
Warning
Remove all objects from the charger before charging your compatible smartphone. Objects, such as coins, keys, rings, paper clips, or cards, between the smartphone and charger may become very hot.
On the rare occasion that the charging system does not detect an object, and the object gets wedged between the smartphone and charger, remove the smartphone and allow the object to cool before removing it from the charger, to prevent burns.
To charge a compatible smartphone:
- Confirm the smartphone is capable of wireless charging.
- Remove all objects from the charging pad. The system may not charge if there are any objects between the smartphone and charger.
- Place the smartphone face up against the rear of the charger.
To maximize the charge rate, ensure the smartphone is fully seated and centered in the holder with nothing under it.
A thick smartphone case may prevent the charger from working, or reduce the charging performance. See your dealer for additional information. - A green will appear on the infotainment display, next to the phone icon. This indicates that the smartphone is detected.
- If a smartphone is placed on the charger and turns off or turns yellow, remove the smartphone and any objects from the pad. Turn the smart phone 180 degrees and wait a few seconds before placing/aligning it on the pad again.
If a smartphone is placed on the charger and turns red, the charger and/or the smartphone is overheated. Remove the smartphone and any objects from the charger in order to cool the system.
The smartphone may become warm during charging. This is normal. In warmer temperatures, the speed of charging may be reduced.
For vehicles with wireless phone projection, the smartphone may overheat during wireless charging. The smartphone may slow down, stop charging, or shut down to protect the battery. The phone may need to be removed from its case to prevent overheating. The may flash while the phone is cooling down enough for wireless charging to automatically resume. This is normal. Individual phone performance may vary.
Software Acknowledgements
Certain Wireless Charging Module product from LG Electronics, Inc. (“LGE”) contains the open source software detailed below. Refer to the indicated open source licenses (as are included following this notice) for the terms
and conditions of their use.
OSS Notice Information
To obtain the source code that is contained in this product, please visit https://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
Freescale-WCT library Copyright (c) 2012-2014 Freescale Semiconductor, Inc.. All rights reserved.
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
FAQs
A factory-installed alarm system is standard on the 2023 Chevrolet Bolt EV
When you use the key fob or the interior lock button to lock the vehicle, the alarm system is automatically triggered.
The alarm system’s sensitivity is fixed and cannot be simply changed by the user.
The alarm system is activated by unauthorized access, such as opening a door without using the key fob or tampering with the car.
Yes, the alarm system is programmed to sound if a window break-in attempt is detected.
You can disarm the alarm system momentarily by unlocking the vehicle with the key fob or inserting the key into the driver’s door.
When the alarm goes off, the horn sounds and the vehicle’s lights flash as a visual deterrent.
To silence the alarm, unlock the doors with the key fob or enter the key into the driver’s door and turn it.
Yes, the key fob usually has a panic button that you can push in an emergency to activate the vehicle’s horn and lights.
Depending on the trim level and options, some Bolt EV cars may be available with remote monitoring and control via a smartphone app.
Typically, the alarm system is protected by the vehicle’s limited warranty. For more information, consult your owner’s handbook or warranty documents.
While aftermarket security improvements are an option, it is suggested that you check with a Chevrolet dealer or expert installer to guarantee compatibility.
Before activating the alarm system, ensure that all doors, windows, and the trunk are firmly closed to decrease the possibility of false alarms.
If you continue to receive false alarms, review your owner’s manual for troubleshooting instructions or contact your Chevrolet dealer.
A replacement key fob is usually available from your Chevrolet dealer or authorized service center.
Useful Link
View Full PDF : Chevrolet Bolt EV 2023 User Guide | Auto User Guide
Indicator Lights : 2023 Chevrolet Bolt EV Indicator Lights Guide