2023 Chevrolet Corvette Lightning

The “Chevrolet Corvette Lightning” does not appear to be an officially acknowledged or generally known vehicle as of my most recent information update in September 2021. This car could have been introduced since my last update, or it could be a concept or custom modification built by fans. If the Chevrolet Corvette Lightning is a true model that will be released in 2023 or later, I would recommend visiting Chevrolet’s official website or other reliable automotive sources for the most up-to-date and accurate information on its features, specifications, and design. You can also submit additional particular information about the vehicle, and I can assist you in creating an introduction based on the information available through September 2021.

Keys and Locks

Keys

Warning
Leaving children in a vehicle with a Remote Keyless Entry (RKE) transmitter is dangerous and children or others could be seriously injured or killed. They could operate the power windows or other controls or make the vehicle move. The windows will function with the RKE transmitter in the vehicle, and children or others could be caught in the path of a closing window. Do not leave children in a vehicle with an RKE transmitter.

The key that is part of the Remote Keyless Entry (RKE) transmitter can be used for all locks.

To remove the key, press the button near the bottom of the transmitter, and pull the key out. Never pull the key out without pressing the button.
If it becomes difficult to turn the key,
inspect the key blade for debris. Periodically, clean the key with a brush or a pick.
See your dealer if a new key is needed.
If locked out of the vehicle, see Roadside Assistance Program.
With an active OnStar or connected service plan, an OnStar Advisor may remotely unlock the vehicle.

Remote Key

See Radio Frequency Statement. If there is a decrease in the remote key operating range:

• Check the distance. The remote key may be too far from the vehicle.
• Check the location. Other vehicles or objects may be blocking the signal.
• Check the remote key’s battery. See “Battery Replacement” later in this section.
• If the remote key is still not working correctly, see your dealer or a qualified technician for service.

Remote Key Operation
The Keyless Access system allows for vehicle entry when the remote key is within 1 m (3 ft). See “Keyless Access Operation” later in this section.
The remote key may work up to 60 m (197 f t) away from the vehicle. Other conditions can affect the performance of the remote key.

Press to lock all doors.

The turn signal indicators may flash and/or the horn may sound on the second press to indicate locking. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”. If the driver door is open whenis pressed, and Open Door Anti-Lockout is enabled, all doors will lock and then the driver door will immediately unlock. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Power Door Locks”. If a passenger door is open when Q is pressed,
all doors lock.

Pressing may also arm the theft-deterrent system.
Press to unlock the driver door. Press unlock again within five seconds to unlock all doors. The remote key can be programmed to unlock all doors on the first button press. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”. The turn signal indicators may flash to indicate unlocking has occurred. Pressingmay also disarm the theft-deterrent system. See Vehicle Alarm System . If equipped with remote windows, press and hold K to remotely open the windows, if enabled. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”.

If equipped, press twice quickly to open or close the liftgate. Press again to stop the power liftgate.

Press and release one time to initiate the vehicle locator. The exterior lamps flash and the horn chirps three times. Press and hold for at least three seconds to sound the panic alarm. The horn sounds and the turn signals flash for 30 seconds, or untilis pressed again or the vehicle is started.
If equipped, first press and releasethen immediately press and holdfor at least four seconds to start the engine from outside the vehicle using the remote key.

Keyless Access Operation

The Keyless Access system allows the doors to be locked and unlocked and the liftgate to be accessed without removing the remote key from a pocket, purse, briefcase, etc. The remote key should be within 1 m (3 ft) of the liftgate or door being opened. There will be buttons on the outside door handles. Keyless Access can be programmed to unlock all doors on the first lock/unlock press from the driver door. Keyless Access can also be turned off. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”.
If equipped with memory seats, remote keys 1 and 2 are linked to seating positions of memory 1 or 2.

Keyless Unlocking/Locking from the Driver Door

When the doors are locked and the remote key is within 1 m (3 f t) of the driver door handle, pressing the lock/unlock button on the driver door handle will unlock the driver door. If the lock/unlock button is pressed again within five seconds, all passenger doors will unlock.

Pressing the lock/unlock button will cause all doors to lock if any of the following occur:

• It has been more than five seconds since the first lock/unlock button press.
• Two lock/unlock button presses were used to unlock all doors.
• Any vehicle door has opened and all doors are now closed.

To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”.

Keyless Unlocking/Locking from Passenger Doors

When the doors are locked and the remote key is within 1 m (3 ft) of the door handle, pressing the lock/unlock button on that door handle will unlock all doors.

Pressing the lock/unlock button will cause all doors to lock if any of the following occur:

• The lock/unlock button was used to unlock all doors.
• Any vehicle door has opened and all doors are now closed.

Disable/Enable Keyless Unlocking of Exterior Door Handles and Liftgate

If equipped, keyless unlocking of the exterior door handles and liftgate can be disabled and enabled.

Disabling Keyless Unlocking:
With the vehicle off, press and hold andon the remote key at the same time for approximately three seconds. The turn signal lamps will flash four times quickly to indicate access is disabled. Using any exterior handle to unlock the doors or open the liftgate will cause the turn signal lamps to flash four times quickly, indicating access is disabled. If disabled, disarm the alarm system before starting the vehicle.

Enabling Keyless Unlocking:
With the vehicle off, press and holdandon the remote key at the same time for approximately three seconds. The turn signal lamps will flash twice quickly to indicate access is enabled. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”.

Passive Locking
This vehicle will lock several seconds after all doors are closed if the vehicle is off and at least one remote key has been removed or none remains in the interior.

If other electronic devices interfere with the remote key signal, the vehicle may not detect the remote key inside the vehicle.

If passive locking is enabled, the doors may lock with the remote key inside the vehicle. Do not leave the remote key in an unattended vehicle.

To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”.

Temporary Disable of Passive Locking

Temporarily disable passive locking by pressing and holdingon the interior door switch with a door open for at least four seconds, or until three chimes are heard. Passive locking will then remain disabled untilon the interior door is pressed, or until the vehicle is started.

Remote Left In Vehicle Alert
When the vehicle is turned off and an remote key is left in the vehicle, the horn will chirp three times after all doors are closed.
To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”.

Remote No Longer In Vehicle Alert
If the vehicle is on with a door open, and then all doors are closed, the vehicle will check for remote keys inside. If an remote key is not detected, the Driver Information Center (DIC) will display NO REMOTE DETECTED and the horn will chirp three times. This occurs only once each time the vehicle is driven. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, Start”.

Keyless Liftgate Opening
Press the touch pad on the underside of the liftgate glass and lift up to open if the remote key is within 1 m (3 ft) and the doors are locked. If the doors are unlocked, the remote key is not required to open the liftgate. See Liftgate 0 18.

Key Access
To access a vehicle with a weak remote key batter.

Programming Remote Keys to the Vehicle

Only remote keys programmed to the vehicle will work. If a remote key is lost or stolen, a replacement can be purchased and programmed through your dealer. The vehicle can be reprogrammed so that lost or stolen remote keys no longer work. Any remaining remote keys will need to be reprogrammed. Each vehicle can have up to eight remote keys matched to it.

Programming with Two Recognized Remote Keys
A new remote key can be programmed to the vehicle when there are two recognized remote keys. To program, the vehicle must be off and all of the remote keys, both currently recognized and new, must be with you.

1. Open the center console. Place the two recognized remote keys in the backup location with the buttons facing down.
2. Remove the key lock cylinder cover on the driver door handle.  Insert the vehicle key of the new remote key into the key lock cylinder on the driver door handle and turn the key to the unlock position five times within 10 seconds.
3. The DIC displays READY FOR REMOTE  3, 4, 5, 6, 7, or 8.
4. Place the remote key to be programmed in the backup location with the buttons facing down.
5. Press POWER O to start the vehicle. When the remote key is learned, the DIC will show that it is ready to program the next remote key.
6. Remove the remote key from the backup location and pressor.
7. To program additional remote keys, repeat Steps 3–5.
8. When all additional remote keys are programmed, press and hold POWER O for 12 seconds to exit programming mode.
9. Put the key back into the remote key.
10. Replace the key lock cylinder cap.

Programming without Two Recognized Remote Keys

If two currently recognized remote keys are not available, follow this procedure to program up to eight remote keys. This feature is not available in Canada. This procedure will take approximately 30 minutes to complete. The vehicle must be off and all of the remote keys to be programmed must be with you.

1. Remove the key lock cylinder cover on the driver door handle. See Door Locks 0 15. Insert the vehicle key of the remote key into the key lock cylinder on the driver door handle and turn the key to the unlock position five times within 10 seconds. The DIC displays REMOTE LEARN PENDING, PLEASE WAIT.
2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press POWER. The DIC will again show REMOTE LEARN PENDING, PLEASE WAIT.
3. Repeat Step 2 two additional times. After the third time, all previously known remote keys will no longer work with the vehicle. Remaining remote keys can be relearned during the next steps. The DIC should now show READY FOR REMOTE # 1.
   Open the center console. Place the remote key in the backup location with the buttons facing down.
4. Press POWER O to start the vehicle. When the remote key is learned, the DIC will show that it is ready to program the next remote key.
5. Remove the remote key from the backup location and press or Q. To program additional remote keys, repeat Steps 4–6. When all additional remote keys are programmed, press and hold POWER O for 12 seconds to exit programming mode.
6. Put the key back into the remote key.
7. Replace the key lock cylinder cap.

Starting the Vehicle with a Low remote key Battery

While trying to start the vehicle, if the remote key battery is weak or if there is interference with the signal, the DIC may display NO REMOTE DETECTED or USE TRANSMITTER POCKET TO START. The DIC may also display REPLACE BATTERY IN REMOTE KEY.
Note that, for improved vehicle security, the remote key is equipped with a motion sensor. When starting the vehicle, if the remote key has been idle for a while, move the remote key slightly and try starting the vehicle.

1.  Open the center console. Place the remote key in the backup location with the buttons facing down.
2. With the vehicle in (Park) or N (Neutral), press the brake pedal and press POWER O. Replace the remote key battery as soon as possible.

Battery Replacement

Warning
Never allow children to play with the remote key. The remote key contains a small battery, which can be a choking hazard. If swallowed, internal burns can occur, resulting in severe injury or death. Seek medical attention immediately if a battery is swallowed.

Warning
To avoid personal injury, do not touch metal surfaces on the remote key when it has been exposed to extreme heat. These surfaces can be hot to the touch at temperatures above 59 °C (138 °F).

Caution
When replacing the battery, do not touch any of the circuitry on the remote key. Static from your body could damage the remote key.

Caution
Always replace the battery with the correct type. Replacing the battery with an incorrect type could potentially create a risk of battery explosion. Dispose of used batteries according to instructions and local laws. Do not attempt to burn, crush, or cut the used battery, and avoid exposing the battery to environments with extremely low air pressures or high temperatures.

Caution
If the remote key is not reassembled properly, liquids could enter the housing and damage the circuitry, resulting in a remote key malfunction and/or failure. To prevent damage, always follow the steps for remote key reassembly in this manual to ensure the remote key is sealed properly whenever the remote key is opened.

Replace the battery if the REPLACE BATTERY IN REMOTE KEY message displays in the DIC.

The battery is not rechargeable. To replace the battery:

1. Press the button on the side of the remote key near the bottom and pull the key out.
   Never pull the key out without pressing the button.
   
2. Separate the two halves of the remote key using a flat tool inserted into the area near the key slot.
3. Remove the battery by pushing on the battery and sliding it toward the bottom of the remote key.
4. Insert the new battery, the positive side facing the back cover. Push the battery down until it is held in place. Replace with a CR 2032 or equivalent battery.
5. Ensure that the silicone mat is correctly positioned with no gaps or wrinkles.
6. Set the remote key button side down on a hard surface and press the other half straight down to force the halves together.
7. Reinsert the key into the remote key.

Remote Start

This feature starts the heating or air conditioning systems and the rear window defogger from outside the vehicle. Use remote start to heat or cool the interior when the vehicle is plugged in to maximize electric range by utilizing electricity from the electrical outlet. Normal operation of the system will return after the vehicle has been turned on.

This button will be on the remote key if equipped with remote start.

The climate control system will use the previous settings during a remote start. The rear defog may come on during remote start based on cold ambient conditions. The rear defogs indicator light does not come on during a remote start. Laws in some local communities may restrict the use of remote starters. For example, some laws require a person using remote start to have the vehicle in view. Check local regulations for any requirements. If the vehicle is low on energy, do not use the remote start feature. The vehicle may run out of energy. The remote key range may be less while the vehicle is running. Other conditions can affect the performance of the remote key.

Remote Starting the Vehicle

To remote start the vehicle:

1. Press and release.
2. Immediately press and holdfor at least four seconds or until the turn signal lamps flash.
3. After entering the vehicle during a remote start, press POWER O with the brake pedal applied to start the vehicle and operate as normal.

Remote start will automatically shut off after 20 minutes unless a time extension is done. When the vehicle starts, the parking lamps will turn on. Remote start run time can be extended.

Extending Vehicle Run Time
The vehicle run time can also be extended by another 20 minutes if after 30 seconds and during the first 20 minutes Steps 1 and 2 are repeated while the vehicle is running. This provides a total of 40 minutes. The remote start can only be extended once. A maximum of two remote starts, or a single start with an extension, are allowed between power cycles using POWER O. For additional remote starts, turn the vehicle on with the remote key in the vehicle.

Canceling Remote Start

To cancel a remote start, do any of the following:

• Press and holduntil the parking lamps turn off.
• Turn on the hazard warning flashers.
• Press POWERwith the brake pedal applied, then press POWERagain to turn the vehicle off.

Conditions in Which Remote Start Will Not Work

The remote vehicle start feature will not operate if:

• The remote key is in the vehicle.
• The vehicle is on.
• The hood is not closed.
• The hazard warning flashers are on.
• The electric drive unit coolant temperature is too high.
• Two remote vehicle starts, or a single remote start with an extension, have already been used.
• The vehicle is not in P (Park).

Door Locks

Warning
Unlocked doors can be dangerous.

• Passengers, especially children, can easily open the doors and fall out of a moving vehicle. The doors can be unlocked and opened while the vehicle is moving. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked. So, all passengers should wear seat belts properly and the doors should be locked whenever the vehicle is driven.
• Young children who get into unlocked vehicles may be unable to get out.
  A child can be overcome by extreme heat and can suffer permanent injuries or even death from heat stroke. Always lock the vehicle whenever leaving it.
• Outsiders can easily enter through an unlocked door when you slow down or stop the vehicle. Locking the doors can help prevent this from happening.

To lock or unlock the doors from outside the vehicle:

• Pressoron the remote key.
• Use Keyless Access. See Remote Key Operation 0 7.
  Use the key in the driver door. The key cylinder is covered with a cap.

To lock or unlock the doors from inside the vehicle:

• Pressoron the power door lock switch.
• Pulling an interior door handle will unlock the door. Pulling the door handle again unlatches it.

The remote key must be within 1 m (3 ft) of the trunk or door being opened. Press the button on the door handle to open. See
“Keyless Access Operation” in Remote Key Operation .

Driver Door Key Lock Cylinder Access (In Case of Dead Battery)

To access the driver door key lock cylinder

1. Pull the door handle (1) to the open position and hold it open until cap removal is complete.
2. Insert the key into the slot (3) on the bottom of the cap (2) and lift the key upward.
3. Move the cap (2) rearward and remove.
4. Use the key in the cylinder.

To replace the cap:

1. Pull the door handle (1) to the open position and hold it open until cap installation is complete.
   
2. Insert the two tabs (6) at the back of the cap between the seal (5) and the metal base (4).
   
3. Slide the cap forward and press the forward edge to install the cap in place.
4. Release the door handle.
5. Check that the cap is secure.

Free-Turning Locks
The door key lock cylinder turns freely when either the wrong key is used, or the correct key is not fully inserted. The free-turning
door lock feature prevents the lock from being forced open. To reset the lock, turn it to the vertical position with the correct key fully inserted. Remove the key and insert it again. If this does not reset the lock, turn the key halfway around in the cylinder and repeat the reset procedure.

Power Door Locks

• Press to lock the doors. The indicator light in the switch will illuminate when activated.
• Press to unlock the doors.

Delayed Locking

This feature delays the actual locking of the doors until five seconds after all doors are closed.

Delayed locking can only be turned on when the Unlocked Door Anti Lockout feature has been turned off.
Whenis pressed on the power door lock switch while the door is open, a chime will sound three times indicating delayed locking is active.
The doors will lock automatically
five seconds after all doors are closed. If a door is reopened before that time, the five-second timer will reset when all doors are closed again.
Press on the door lock switch again or presson the remote key to lock the doors immediately.
This feature can also be programmed. To view available settings from the infotainment screen, touch Settings > Vehicle > Power Door Locks.

Automatic Door Locks

The doors will lock automatically when all doors are closed, the vehicle is on, and the shift switch is out of P (Park).
If a vehicle door is unlocked and then opened and closed, the doors will lock either when your foot is removed from the brake or the vehicle speed becomes faster than 13 km/h (8 mph).

To unlock the doors:

• Press K on a door.
• Shift the vehicle into P (Park).

Automatic door unlocking can be programmed. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Power Door Locks”.

To unlock the doors:

1. . Presson a power door lock switch.
2. If equipped with an automatic transmission, shift the transmission into P (Park).
3. If equipped with a manual transmission, turn the vehicle off when parked.

Automatic door locking cannot be disabled.
Automatic door unlocking can be enabled through vehicle personalization. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Power Door Locks”.

Lockout Protection

If the vehicle is on or in accessory mode and the power door lock switch is pressed with the driver door open, all the doors will lock and only the driver door will unlock.
If the vehicle is off and locking is requested while a door is open, when all doors are closed the vehicle will check for remote keys inside. If an remote key is detected and the number of remote keys inside has not reduced, the driver door will unlock and the Lockout Protection can be manually overridden with the driver door open by pressing and holdingon the power door lock switch.

Open Door Anti-Lockout
If Open Door Anti-Lockout has been turned on and the vehicle is off, the driver door is open, and locking is requested, all the doors will lock and the driver door will remain unlocked. The Open Door Anti-Lockout
feature can be turned on or off. To view available settings from the infotainment screen, touch Settings > Vehicle > Power Door Locks.

Doors

Trunk

Warning
Exhaust gases can enter the vehicle if it is driven with the liftgate, trunk/hatch open, or with any objects that pass through the seal between the body and the trunk/hatch or liftgate. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death.
If the vehicle must be driven with the liftgate, or trunk/hatch open:

• Close all of the windows.
• Fully open the air outlets on or under the instrument panel.
• Adjust the climate control system to a setting that brings in only outside air and set the fan speed to the highest setting. See “Climate Control Systems” in the Index.
• If the vehicle has a power liftgate, disable the power liftgate function.
  For more information about carbon monoxide.

Trunk Release

To open the trunk from outside of the vehicle:

• Press  twice quickly on the remote key.
• Press the touch pad in the area above the license plate after unlocking all doors.
• For Keyless Access, press the touch pad in the area above the license plate when the remote key is within 1 m (3 ft) of the rear of the vehicle.

For automatic transmissions, the vehicle must be in P (Park). For manual transmissions, the vehicle must be off, or stationary with the parking brake set.

From inside the vehicle, presson the lower portion of the driver door.

Emergency Trunk Release Handle
Caution
Do not use the emergency trunk release handle as a tie-down or anchor point when securing items in the trunk as it could damage the handle.

There is a glow-in-the-dark emergency trunk release handle on the trunk lid. This handle will glow following exposure to light. Pull the release handle to open the trunk from the inside.

After pulling the emergency trunk release handle, push the handle back into the bezel.

Emergency Trunk Release (Convertible Only)
If the trunk lid cannot be opened using the remote key or the trunk release button:

1. Locate the key extender in the glove box.
   
2. Locate the manual release beside the rear seat cushion on the driver side.
3. Push down on the upper rear seat cushion on the driver side until the manual release is visible.
4. Remove the key from the remote key.
   
5. Remove any additional items attached to the key — such as keys, rings, or tags —then fully insert the key into the manual release.
   
6. Place the key extender over the key head until the key extender stops.
7. Firmly turn the key clockwise to unlatch the trunk lid.
8. Remove the key.
9. Store the key extender in the glove box.
10. Return the key to the remote key.

Vehicle Security

This vehicle has theft-deterrent features; however, they do not make the vehicle impossible to steal.

FAQ