2024 Chevrolet Equinox Fuses and Fuse Box | How to fix a Blown Fuse
The 2024 Chevrolet Equinox’s fuse box is an important part of keeping the car’s electrical parts safe. The fuse box usually sits in the engine bay or the cabin’s interior. It holds different fuses that protect different circuits from electrical overloads. Each fuse is for a different system, like the music system, the lights, or the power windows. If there is an electrical problem or overload, a fuse can blow. This breaks the connection and keeps the parts that are connected from getting damaged. When a fuse blows, it’s important to figure out which circuit is affected and then find the fuse that goes with it in the box. You can change a blown fuse with a new one with the same amperage rating. This information is usually on the fuse box cover or in the owner’s manual. This easy process helps get the damaged system working again, making replacing the fuse a useful and easy way to fix electrical problems in a 2024 Chevrolet Equinox.
2024 Chevrolet EQUINOX Specs, Price, Features, Mileage (Brochure)
Electrical System
Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems. Fuses and circuit breakers protect power devices in the vehicle.
If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed. To check a fuse, look at the band inside the fuse. If the band is broken or melted, replace the fuse. Be sure to replace a bad fuse with a fuse of identical size and rating.
Replacing a Blown Fuse
- Turn off the vehicle.
- Locate the fuse puller in the engine compartment fuse block.
- Use the fuse puller to remove the fuse from the top or side.
- If the fuse must be replaced immediately, borrow a replacement fuse with the same amperage from the fuse block. Choose a vehicle feature that is not needed to safely operate the vehicle. Repeat Steps 2-3.
- Insert the replacement fuse into the empty slot of the blown fuse.
At the next opportunity, see your dealer to replace the blown fuse.
Headlamp Wiring
An electrical overload may cause the lamps to go on and off, or in some cases to remain off. Have the headlamp wiring checked right away if the lamps go on and off or remain off?
Windshield Wipers
If the wiper motor overheats due to heavy snow or ice, the windshield wipers will stop until the motor cools and will then restart. Although the circuit is protected from electrical overload, overload due to heavy snow or ice may cause wiper linkage damage. Always clear ice and heavy snow from the windshield before using the windshield wipers. Vehicle Care 271 If the overload is caused by an electrical problem and not snow or ice, be sure to get it fixed.
Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of damage caused by electrical problems.
Danger
Fuses and circuit breakers are marked with their ampere rating. Do not exceed the specified amperage rating when replacing fuses and circuit breakers. The use of an oversized fuse or circuit breaker can result in a vehicle fire. You and others could be seriously injured or killed.
Warning
Installation or use of fuses that do not meet GM’s original fuse specifications is dangerous. The fuses could fail, and result in a fire. You or others could be injured or killed, and the vehicle could be damaged.
See Accessories and Modifications 0 248 and General Information 0 248. To check or replace a blown fuse, see Electrical System Overload 0 269.
2024 Chevrolet EQUINOX Specs, Price, Features, Mileage (Brochure)
Engine Compartment Fuse Block
There are three clips on the side of the fuse block cover. See Engine Compartment Overview 0 251.
To remove the fuse block cover, squeeze the clips on the cover and lift it straight up.
Caution
Spilling liquid on any electrical component of the vehicle may damage it. Always keep the covers on any electrical component.
The vehicle may not be equipped with all of the fuses, relays, and features are shown.
Fuses | Usage |
F01 | Starter 1 |
F02 | Starter 2 |
F03 | Lambda Sensor 1/Purge Motor |
F04 | Engine Control Module |
F05 | Aero Shutter/ Water Pump |
F06 | Transmission Control Module |
F07 | – |
F08 | – |
F09 | Air Conditioning Clutch |
F10 | Canister Vent Solenoid |
F11 | Fuel System |
F12 | Front Heated Seats |
F13 | Engine Coolant Pump |
F14 | – |
F15 | Lambda Sensor 2 |
F16 | Ignition Coils |
F17 | Engine Control Module |
F18 | Engine Control Module |
F19 | – |
F20 | DC-DC Converter 2 |
F21 | Shift Control |
F22 | Antilock Brake Pump |
F23 | Front/Rear Washer Pump |
F24 | – |
F25 | – |
F26 | – |
F27 | Antilock Brake Valves |
F28 | LD Trailer |
F29 | Rear Window Defogger |
F30 | Mirror Defroster |
F31 | – |
F32 | Variable Functions |
F33 | – |
F34 | Horn |
F35 | – |
F36 | Headlamps/Daytime Running Lamps Right |
F37 | – |
F38 | Automatic Headlamp Leveling |
F39 | – |
F40 | – |
F41 | Transmission Range Control Module |
F42 | Motorized Headlamp |
F43 | – |
F44 | Interior Rearview Mirror |
F45 | Passenger Side Ventilated Seat |
F46 | Driver Side Ventilated Seat |
F47 | Steering Column Lock Assembly |
F48 | Rear Wiper |
F49 | – |
F50 | Heated Steering Wheel |
F51 | – |
F52 | Engine Control Module/ Transmission Control |
F53 | – |
F54 | – |
F55 | Front Wiper Speed/ Control |
F56 | – |
F57 | Headlamps/Daytime Running Lamps Left |
Relays | Usage |
K01 | Starter Solenoid |
K02 | Air Conditioning Control |
K03 | Engine Control Module |
K04 | Front Wiper Control |
K05 | Starter Solenoid 2 |
K06 | – |
K07 | – |
K08 | – |
K09 | Front Wiper Speed |
K10 | – |
K11 | – |
K12 | Headlamps/Daytime Running Lamps Right |
K13 | Headlamps/Daytime Running Lamps Left |
K14 | Run/Crank |
K15 | Rear Window Defogger |
Instrument Panel Fuse Block
The instrument panel fuse block is under the instrument panel on the driver’s side. To access the fuses, press and release the latch near the top center square.
Apply pressure to the two retaining tabs on the sides of the cover, until the two retaining tabs clear the sides of the instrument panel. Allow the panel to move downward and out of the way.
To reinstall the cover, reverse the steps. The vehicle may not be equipped with all of the fuses and relays shown.
Fuses | Usage |
F01 | DC AC Inverter |
F02 | Front Windows |
F03 | Trailer Brake |
F04 | Heating, Ventilation, and Air Conditioning Blower |
F05 | – |
F06 | Central Gateway Module |
F07 | – |
F08 | Body Control Module 3 |
F09 | Amplifier |
F10 | – |
F11 | – |
F12 | – |
F13 | – |
F14 | – |
F15 | Transmission Control Module |
F16 | Front Heated Seats |
F17 | Left Data Link Connector |
F18 | Body Control Module 7 |
F19 | Exterior Mirror |
F20 | – |
F21 | Body Control Module 4 |
F22 | – |
F23 | – |
F24 | Sensing and Diagnostic Module |
F25 | Occupancy Sensor |
F26 | – |
F27 | Power Seats |
F28 | Rear Windows |
F29 | – |
F30 | – |
F31 | Steering Wheel Controls |
F32 | Body Control Module 8 |
F33 | Heating, Ventilation, and Air Conditioning |
F34 | Passive Entry, Passive Start |
F35 | Liftgate Latch |
F36 | Wireless Charger Module/ USB Accessory |
F37 | Cigarette Lighter |
F38 | OnStar |
F39 | Instrument Panel USB |
F40 | Camera Module/Liftgate Module |
F41 | Park Assist Module/ Center Stack Display/ Heating, Ventilation, and Air Conditioner Display/ Universal Garage Door Opener/Overhead Control Switchback |
F42 | Radio |
Relays | Usage |
K01 | – |
K02 | Retained Accessory Power |
K03 | Liftgate |
K04 | – |
K05 | – |
Circuit Breakers | Usage |
CB1 | – |
CB2 | – |
Rear Compartment Fuse Block
The rear compartment fuse block is behind a trim panel on the side of the rear compartment.
Remove the trim plate to access the fuse block. The vehicle may not be equipped with all of the fuses and relays shown.
Fuses | Usage |
F1 | Power Seat |
F2 | Liftgate |
F3 | Trailer Auxiliary Power |
F4 | – |
F5 | Memory Seat Module |
F6 | Sunroof |
F7 | Side Blind Zone Alert |
F8 | Trailer Reverse Lamps |
F9 | Rear Heated Seat 1 |
F10 | Park Lamps |
F11 | Rear Heated Seat 2 |
F12 | – |
F13 | Trailer Parking Lamp |
F14 | Right Trailer Stoplamp/ Turn Signal Lamp |
F15 | – |
F16 | – |
F17 | Video Processing Module |
F18 | Left Trailer Stoplamp/ Turn Signal Lamp |
F19 | All Wheel Drive |
F20 | Lumbar |
F21 | Rear Auxiliary Power Outlet |
F22 | Rear Drive Unit |
Relays | Usage |
K1 | Right Trailer Stoplamp/ Turn Signal Lamp |
K2 | Trailer Reverse Lamps |
K3 | Left Trailer Stoplamp/ Turn Signal Lamp |
K4 | Park Lamps |
K5 | – |
FAQs
Fuses in the 2024 Chevrolet Equinox serve to protect various electrical components by breaking the circuit if an electrical overload or short circuit occurs.
The number of fuse boxes may vary, but the 2024 Chevrolet Equinox typically has at least one main fuse box.
The main fuse box is usually located in the engine compartment, but there may be additional fuse boxes inside the vehicle.
Common signs include a malfunctioning electrical component, such as lights or accessories not working, and sometimes a visible burn mark on the fuse.
The 2024 Chevrolet Equinox’s owner’s manual should have a fuse box diagram, detailing the location and purpose of each fuse. Additionally, fuses are usually labeled with their amperage and purpose.
Typically, you’ll only need a fuse puller or a pair of needle-nose pliers to remove the blown fuse and a replacement fuse of the correct amperage.
No, it’s not recommended to replace fuses with higher amperage ones as it can damage the electrical system. Always use the specified amperage as indicated in the owner’s manual.
Fuses should be checked if an electrical issue arises. Regular inspection during routine maintenance is also a good practice.
Check with the manufacturer or visit the National Highway Traffic Safety Administration (NHTSA) website for any recalls related to fuses.
Ensure the vehicle is turned off, and consult the owner’s manual for specific instructions. If unsure, seek professional help.
Yes, replacing a blown fuse is a relatively simple task that most vehicle owners can do themselves.
Yes, a blown fuse can lead to various electrical issues as it disrupts the circuit for the associated component.
Fuses serve as safety features by preventing electrical overloads that could potentially cause fires or damage to the vehicle’s electrical system.
If replacing the fuse doesn’t solve the problem, there may be an underlying electrical issue that requires professional diagnosis.
While the vehicle usually comes with spare fuses, it’s advisable to keep a spare fuse kit of various amperages in the vehicle for emergencies.
Useful Link:
View Full PDF: 2024 Chevrolet Equinox Owner’s Manual | Auto User Guide
2024 Chevrolet EQUINOX Specs, Price, Features, Mileage (Brochure)
2024 Chevrolet Equinox Instrument Cluster | How to use Dashboard