2024 Chevrolet Express Owner’s Manual
When it comes to full-size vans, the 2024 Chevrolet Express is a reliable, useful, and flexible model that is made to meet the needs of businesses, organizations, and travellers alike. The 2024 Express has a strong and long-lasting appearance. Its exterior is simple and practical, and its interior is roomy and flexible, so it can be set up in a lot of different ways to meet different needs, from hauling cargo to transporting people. The 2024 Express has a range of powerful and fuel-efficient engine options that allow it to handle tough jobs while keeping running costs low. The Chevrolet Express has a history of dependability, and this latest version of the car is still a reliable workhorse for people who want a vehicle that is useful, durable, and flexible.
Vehicle Checks
Doing Your Own Service Work
Warning
It can be dangerous to work on your vehicle if you do not have the proper knowledge, service manual, tools,
or parts. Always follow owner’s manual procedures and consult the service manual for your vehicle before doing any service work.
If doing some of your own service work, use the proper service manual. It tells you much more about how to service the vehicle than this manual can. To order the proper service manual, see Publication Ordering Information 0 259.
Caution
Damage caused by improper maintenance can lead to costly repairs and may not be covered by the vehicle warranty. Maintenance intervals, checks, inspections, recommended fluids, and lubricants are important to keep the vehicle in good working condition.
Do not have chemical flushes that are not approved by GM performed on the vehicle. The use of flushes, solvents, cleaners, or lubricants that are not approved by GM could damage the vehicle, requiring expensive repairs that are not covered by the vehicle warranty.
This vehicle has an airbag system. Before attempting to do your own service work, see Servicing the Airbag-Equipped Vehicle 0 42.
If equipped with remote vehicle start, open the hood before performing any service work to prevent remote starting the vehicle accidentally. See Remote Vehicle Start 0 10. Keep a record with all parts receipts and list the mileage and the date of any service work performed. See Maintenance Records 0 246.
Caution
Even small amounts of contamination can cause damage to vehicle systems. Do not allow contaminants to contact the fluids, reservoir caps, or dipstick.
Hood
Warning
Turn the vehicle off before opening the hood. If the engine is running with the hood open, you or others could be injured.
Components under the hood can get hot from running the engine. To help avoid the risk of burning unprotected skin, never touch these components until they have cooled, and always use a glove or towel to avoid direct skin contact. Clear any snow from the hood before opening.
To open the hood:
- Pull the hood release lever with the Car symbol. It is on the lower left side of the instrument panel.
- Go to the front of the vehicle and locate the secondary release lever under the front center of the hood. Push the secondary hood release lever upward to release.
- 3. Lift the hood and release the hood prop rod from its retainer, in the front of the engine compartment. Securely insert the rod end into the slot marked with an arrow, on the underside of the hood.
To close the hood:
- Before closing the hood, be sure all filler caps are on properly, and
- Lift the hood and remove the hood prop rod from the underside of the hood. Return the prop rod to its retainer. The prop rod must click into place when returning it to the retainer to prevent hood damage.
- Lower the hood 20 cm (8 in) above the vehicle and release it. Check to make sure the hood is latched completely. Repeat this process with additional force if necessary.
Warning
Do not drive the vehicle if the hood is not latched completely. The hood could open fully, block your vision, and cause a crash. You or others could be injured. Always close the hood completely before driving.
Engine Oil Life System
When to Change Engine Oil
If equipped, this vehicle may have a computer system that indicates when to change the engine oil and filter. This is based on a combination of factors which include engine revolutions, engine temperature, and miles driven. Based on driving conditions, the mileage at which an engine oil change is indicated can vary considerably. For the oil life system to work properly, the system must be reset every time the oil is changed.
When the system has calculated that oil life has been diminished, it indicates that an oil change is necessary. A CHANGE ENGINE OIL SOON message comes on. Change the oil as soon as possible within the next 1 000 km (600 mi). It is possible that, if driving under the best conditions, the oil life system might indicate that an oil change is not necessary for up to a year. The engine oil and filter must be changed at least once a year and, at this time, the system must be reset. Your dealer has trained service people who will perform this work and reset the
system. It is also important to check the oil regularly over the course of an oil drain interval and keep it at the proper level.
If the system is ever reset accidentally, the oil must be changed at 5 000 km (3,000 mi) since the last oil change. Remember to reset the oil life system whenever the oil is changed.
How to Reset the Engine Oil Life System
Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change.
To reset the Engine Oil Life System on most models:
- Display the OIL LIFE REMAINING on the DIC. See Driver Information Center (DIC) 0 80.
- Press and hold V on the DIC while the Oil Life display is active. The oil life will change to 100%.
The oil life system can also be reset as follows:
- Display the OIL LIFE REMAINING on the DIC. See Driver Information Center (DIC) 0 80.
- Fully press and release the accelerator pedal three times within five seconds.
If the display shows 100%, the system is reset.
If the CHANGE ENGINE OIL SOON message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.
Automatic Transmission Fluid
How to Check Automatic Transmission Fluid
It is not necessary to check the transmission fluid level. A transmission fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle to your dealer and have it repaired as soon as possible.
There is a special procedure for checking and changing the transmission fluid. Because this procedure is difficult, this should be done at your dealer. Contact your dealer for additional information.
Caution
Use of the incorrect automatic transmission fluid may damage the vehicle, and the damage may not be covered by the vehicle warranty. Always use the correct automatic transmission fluid. See Recommended Fluids and Lubricants 0 244.
Change the fluid and filter at the intervals listed in Maintenance Schedule 0 240, and be sure to use the fluid listed in Recommended Fluids and Lubricants 0 244.
Engine Air Cleaner/Filter
The air cleaner/filter assembly is on the front of the engine compartment on the driver side of the vehicle. See Engine Compartment Overview 0 174.
When to Inspect the Engine Air Cleaner/Filter
For intervals on changing and inspecting the engine air filter, see Maintenance Schedule 0 240.
How to Inspect/Replace the Engine Air Cleaner/Filter
Do not start the engine or have the engine running with the engine air filter housing open. Before removing the engine air filter, make sure that the engine air filter housing and nearby components are free of dirt and debris. Do not clean the engine air filter or components with water or compressed air.
To inspect and replace the filter:
- Remove the six screws, slide the top cover forward and lift, to gain access to the air cleaner/filter.
- Remove the air cleaner/filter from the housing base. Take care to dislodge as little dirt as possible.
Warning If part replacement is necessary, the part must be replaced with one of the same part number or with an equivalent part. Use of a replacement part without the same fit, form, and function may result in personal injury or damage to the vehicle. - Clean the air cleaner/filter sealing surface and housing base.
- Inspect or replace the engine air cleaner/filter.
- Install the top cover by sliding it into position on the housing base, and secure using six screws. See Maintenance Schedule 0 240 to determine when to replace the engine air cleaner/filter.
Warning
Operating the engine with the air cleaner/filter off can cause you or others to be burned. Use caution when working on the engine. Do not start the engine or drive the vehicle with the air cleaner/filter off, as flames may be present if the engine backfires.
Caution
If the air cleaner/filter is off, dirt can easily get into the engine, which could damage it. Always have the air cleaner/filter in place when driving.
Cooling System
The cooling system allows the engine to maintain the correct working temperature.
- Radiator Pressure Cap
- Coolant Recovery Tank
- Engine Cooling Fan (Out of View)
Warning
Do not touch heater or radiator hoses, or other engine parts. They can be very hot and can burn you. Do not run the engine if there is a leak; all coolant could leak out. That could cause an engine fire and can burn you. Fix any leak before driving the vehicle.
Headlamp Aiming
Front Headlamp Aiming
Headlamp aim has been preset and should need no further adjustment.
If the vehicle is damaged in a crash, the headlamp aim may be affected.
If an adjustment to the headlamps is necessary, see your dealer.
Bulb Replacement
For the proper type of replacement bulbs, or any bulb-changing procedure not listed in this section, contact your dealer.
Caution
Do not replace incandescent bulbs with aftermarket LED replacement bulbs. This can cause damage to the vehicle electrical system.
Halogen Bulbs
Warning
Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb package.
Front Turn Signal, Sidemarker, and Parking Lamps
- Front Parking and Turn Signal Lamp
- Front Sidemarker Lamp
To replace the front turn signal, sidemarker, and/or parking lamp bulb(s):
- Use a small tool to unlatch the outboard clip on the lamp by pushing inboard and prying the lamp assembly forward.
- Remove the lamp from the grille.
- Turn the bulb socket counterclockwise one-quarter turn and remove it from the lamp assembly.
- Remove the bulb from the socket by pulling it straight out.
- Replace the bulb.
- Turn the bulb socket clockwise to reinstall it in the lamp assembly.
- Reinstall the lamp assembly into the grille until the outboard clip snaps into place.
Taillamps
To replace a taillamp/turn signal lamp or back-up lamp bulb:
- Remove the two inboard nuts from the inside of the taillamp assembly.
- The third nut (3) is under the applique piece (2) above the lamp. Remove the two inboard applique nuts. Pull the applique (2) straight rearward slightly to clear the studs. Then rotate the applique (2) just far enough to gain access to the outer push pins (1).
- Carefully disconnect the push pins (1) from the applique bracket.
- Remove the third nut (3) from the upper outboard side of the lamp.
- Remove the taillamp assembly from the vehicle.
- Remove the taillamp/turn signal lamp (1) or back-up lamp (2) bulb socket by turning it counterclockwise one-quarter turn and pulling it out of the lamp assembly.
- Remove the bulb by pulling it straight out.
- Push the new bulb into the socket.
- Reinstall the bulb socket by turning it clockwise into the lamp assembly.
- Reverse Steps 1–5 to reinstall the taillamp assembly and applique.
Center High-Mounted Stoplamp (CHMSL)
The Center High-Mounted Stoplamp (CHMSL) is above the rear doors at the center of the vehicle.
To replace a bulb:
- Remove the two screws from the CHMSL assembly.
- Remove the CHMSL assembly.
- Turn the bulb socket counterclockwise one-quarter turn to remove it from the lamp assembly.
- Pull the old bulb straight out of the socket and push the new bulb into the socket.
- Turn the bulb socket clockwise one-quarter turn to install it in the lamp assembly.
- Reinstall the CHMSL assembly and two screws.
Do not block or damage the CHMSL when items are loaded on the roof of the vehicle.
FAQ
The Chevrolet Express is a full-size van known for its durability and versatility, commonly used for commercial purposes like cargo transportation or passenger transit.
Engine options may vary, but typically the Express offers choices such as a V6 gasoline engine or V8 options for more power.
Standard safety features may include stability control, airbags, rearview cameras, and available options like blind-spot monitoring and lane departure warning.
The seating capacity varies based on the model and configuration. It can range from around 12 to 15 passengers in the passenger van configuration.
Yes, Chevrolet Express typically offers multiple wheelbase options, allowing for different body lengths to suit various needs.
The Express may come equipped with features like touchscreen infotainment, Bluetooth connectivity, USB ports, and optional navigation systems.
Towing capacity can vary depending on the engine and configuration, but it’s often capable of towing several thousand pounds.
Cargo space can differ based on the configuration, but it typically offers a large interior volume for hauling goods or equipment.
The specific trim levels can vary, but common ones may include LS and LT trims, each offering different features and options.
Chevrolet Express models traditionally have been rear-wheel drive, but availability of AWD may vary based on the specific model and year.
Fuel efficiency can differ based on the engine and configuration, but being a full-size van, it generally consumes more fuel compared to smaller vehicles.
As of the latest information available, Chevrolet hadn’t introduced hybrid or electric versions of the Express for the 2024 model year.
It competes with other full-size vans like the Ford Transit and Mercedes-Benz Sprinter, offering its own blend of features, reliability, and customization options.
The warranty may include a limited bumper-to-bumper warranty, powertrain warranty, and other specific coverages. It’s best to check with the dealership for exact details.
You can buy a new Chevrolet Express from authorized Chevrolet dealerships. Additionally, used models might be available from certified pre-owned dealers or private sellers.
Useful Link
Download Manuals: https://www.chevrolet.com/support/vehicle/manuals-guides
2024 Chevrolet MALIBU Specs, Price, Features, Mileage (Brochure)