2024 Chevrolet Trailblazer Fuses and Fuse Box | How to replace fuses
There are a lot of complicated electrical parts in the 2024 Chevrolet Trailblazer. Fuse protection keeps different parts from overheating. The fuse box, which is an important part of this system, is placed in a way that makes it easy to do upkeep. The fuse box holds several fuses, each of which controls a different electrical function in the car. These tasks include everything from turning on lights and devices to managing important engine parts. When an overcurrent fuse blows, it breaks the connection and keeps the part that was connected from getting damaged. Replacement of fuses is an important skill for all Trailblazer owners to have because it keeps the car’s electrical systems running smoothly. To change a fuse, look in your car’s owner’s manual for specific information on where to find the fuse box and a full list of what each fuse does. Finding the bad fuse, taking it out with a fuse puller or needle-nose pliers, and then putting in a new fuse with the same power is usually how the process works. A simple but effective way to keep your 2024 Chevrolet Trailblazer‘s electrical system in good shape is to check the fuses often and replace them as needed.
2024 Chevrolet Trailblazer Specs, Price, Features, Mileage And Review
Electrical System
Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system overload.
When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems.
Fuses and circuit breakers protect power devices in the vehicle.
If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed.
To check a fuse, look at the band inside the fuse. If the band is broken or melted, replace the fuse. Be sure to replace a bad fuse with a fuse of identical size and rating.
Replacing a Blown Fuse
- Turn off the vehicle.
- Locate the fuse puller in the engine compartment fuse block.
- Use the fuse puller to remove the fuse from the top or side.
- If the fuse must be replaced immediately, borrow a replacement fuse with the same amperage from the fuse block. Choose a vehicle feature that is not needed to safely operate the vehicle. Repeat Steps 2-3.
- Insert the replacement fuse into the empty slot of the blown fuse.
At the next opportunity, see your dealer to replace the blown fuse.
Headlamp Wiring
An electrical overload may cause the lamps to go on and off, or in some cases to remain off. Have the headlamp wiring checked right away if the lamps go on and off or remain off?
Windshield Wipers
If the wiper motor overheats due to heavy snow or ice, the windshield wipers will stop until the motor cools and will then restart.
Although the circuit is protected from electrical overload, overload due to heavy snow or ice may cause wiper linkage damage. Always clear ice and heavy snow from the windshield before using the windshield wipers.
If the overload is caused by an electrical problem and not snow or ice, be sure to get it fixed.
Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of damage caused by electrical problems.
Danger
Fuses and circuit breakers are marked with their ampere rating. Do not exceed the specified amperage rating when replacing fuses and circuit breakers. The use of an oversized fuse or circuit breaker can result in a vehicle fire. You and others could be seriously injured or killed.
Warning
Installation or use of fuses that do not meet GM’s original fuse specifications is dangerous. The fuses could fail, and result in a fire. You or others could be injured or killed, and the vehicle could be damaged.
See Accessories and Modifications 0 201 and General Information 0 201. To check or replace a blown fuse, see Electrical System Overload 0 228.
Engine Compartment Fuse Block
To remove the fuse block cover, squeeze the clip and lift it.
Caution
Spilling liquid on any electrical component of the vehicle may damage it. Always keep the covers on any electrical component.
The vehicle may not be equipped with all of the fuses, relays, and features shown.
Micro Fuses | Usage |
F02 | CLUSTER |
F03 | N/A |
F06 | OSRVM DEFOG |
F07 | L/GATE RELEASE |
F08 | N/A |
F09 | VENT SEAT |
F10 | N/A |
F11 | N/A |
F12 | N/A |
F14 | ISRVM REAR VIEW CAMERA |
F15 | N/A |
F16 | HDLP LVL |
F17 | N/A |
F18 | FTZM |
F19 | N/A |
F20 | N/A |
F22 | TRLR ST/TRN LT-TRLR |
F24 | ESCL |
F25 | ECM TCM RUN/CRNK |
F26 | FRT/REAR WSW PUMP |
F27 | IGN COIL GAS |
F28 | AERO SH |
F29 | AHL AFL MDL |
F31 | ECM PT2 |
F32 | ENG COMP2 |
F33 | RVC |
F34 | FRT FOG LP |
F35 | ENG COMP1 |
F36 | ECM PT1 |
F38 | TRLR PRK LAMP-TRLR |
F40 | N/A |
F41 | REAR WPR |
F42 | HORN |
F44 | REAR WPR PRK |
F45 | A/C CLUTCH |
F46 | N/A |
F47 | ECM BATT GAS |
F49 | HDLP HI LH |
F50 | N/A |
F51 | HDLP HI RH |
F52 | TRLR ST/TRN RT-TRLR |
F53 | AUX WATER PUMP |
F54 | PEPS |
F56 | CNSTR VENT SOL GAS |
F57 | N/A |
F58 | TCM BATT |
Spare Fuses | Usage |
SF01 | SPARE |
SF02 | SPARE |
SF03 | SPARE |
SF04 | SPARE |
SF05 | SPARE |
SF06 | SPARE |
ET Fuses | Usage |
F48 | N/A |
J-Case Fuses | Usage |
F01 | N/A |
F05 | N/A |
F13 | REAR WNDW DEFOG |
F21 | E- BOOST PWR1 |
F23 | STRTR PINION |
F59 | N/A |
F62 | N/A |
F63 | N/A |
M-case Fuses | Usage |
F04 | FRT WPR |
F30 | STRTR SOL |
F37 | AUX OIL PUMP |
F39 | N/A |
F43 | PWR WNDW RT |
F55 | PWR WNDW LT |
F60 | N/A |
F61 | N/A |
Mini Relays | Usage |
K03 | RUN/CRNK |
K04 | REAR DEFOG |
K06 | STRTR PINION |
K08 | PT RLY |
K09 | N/A |
HC Micro Relays | Usage |
K01 | N/A |
K02 | N/A |
K05 | STRTR SOL |
K07 | A/C CNTRL |
K10 | N/A |
Ultra Micro Relays | Usage |
K11 | N/A |
Instrument Panel Fuse Block
The instrument panel fuse block is on the underside of the driver-side instrument panel. To access the fuses, remove the storage compartment.To remove the storage compartment, use the hole at the top to pull the compartment outward from the instrument panel.
2024 Chevrolet Trailblazer Specs, Price, Features, Mileage And Review
Warning
Be careful of injuries to your fingers and nails when using the holes to remove the storage compartment.
Fuse | Usage |
F01 | LUMBAR |
F02 | SUNROOF |
F03 | VBAT_3 |
F04 | VBAT_7 |
F05 | VBAT_6 |
F06 | AUTO HVAC |
F07 | CGM |
F08 | ST_WHL_HTR |
F09 | DISPLAY |
F10 | RADIO |
F11 | ONSTAR (ERA) |
F12 | PARK_ASSIST |
F13 | MAN. HVAC |
F14 | WL CHARGER |
F15 | VBAT_2 |
F16 | VBAT_1 |
F17 | SWC BKLT |
F18 | N/A |
F19 | N/A |
F20 | CLOCK SPRING |
F21 | OCC SEN |
F22 | DLC |
F23 | SDM |
F24 | IGN_SW/ESCL |
F25 | PWR L GATE MDL |
F26 | SEC FUSE 2 |
F27 | PWR SEAT CO DR |
F28 | VBAT_8 |
F29 | DC-DC AT |
F30 | PWR L GATE MDL |
F31 | OSRVM |
F32 | FRT HS PWR 1 |
F33 | VBAT_4 |
F34 | FRT HS PWR 2 |
F35 | AMPLIFIER |
F36 | ONSTAR (TCP) |
F37 | PWR SEAT DR |
F38 | DC DC_400W |
F39 | SEC FUSE 1 |
F40 | HVAC_BLOWER |
Circuit Breaker | Usage |
CB1 | N/A |
CB2 | APO |
Relay | Usage |
K01 | I RAP_ACC |
K02 | RUN |
K03 | LOGISTICS |
K04 | N/A |
K05 | N/A |
K06 | N/A |
Rear Compartment Fuse Block
The rear compartment fuse block is behind a cover on the driver’s side of the rear compartment. To access the fuses, remove the cover.
Fuse | Usage |
F01 | N/A |
F02 | RDCM ELEC |
F03 | N/A |
F04 | N/A |
F05 | DC/AC INVERTER |
F06 | N/A |
F07 | RDCM |
F08 | RR SEAT HEAT PWR1 |
F09 | N/A |
F10 | RR SEAT HEAT PWR2 |
F11 | N/A |
F12 | N/A |
F13 | N/A |
F14 | N/A |
F15 | N/A |
F16 | N/A |
F17 | N/A |
F18 | N/A |
F19 | N/A |
F20 | N/A |
F21 | N/A |
Circuit Breakers | Usage |
CB | 1 N/A |
Relays | Usage |
K01 | N/A |
K02 | N/A |
K03 | N/A |
K04 | N/A |
K05 | N/A |
FAQs
The 2024 Chevrolet Trailblazer typically has two fuse boxes, one located in the engine compartment and another inside the cabin.
The engine compartment fuse box houses fuses related to various engine and powertrain components, such as the starter, alternator, and electronic control modules.
The interior fuse box is usually located on the driver’s side, either under the dashboard or in the side panel.
To access the engine compartment fuse box, open the hood and locate the fuse box cover. Remove the cover to reveal the fuses.
You typically only need a pair of needle-nose pliers or a fuse puller, which may come with the vehicle’s fuse box.
It’s crucial to use the correct amperage and type of fuse specified in the vehicle’s manual. Using the wrong fuse can lead to electrical issues or damage.
Check the metal strip inside the fuse. If it’s broken or melted, the fuse is likely blown. Additionally, a visual inspection of the fuse may reveal discoloration.
Issues like a short circuit, faulty components, or overloading the circuit can cause fuses to blow.
Many vehicles come with a spare fuse kit. Check the fuse box covers for information on spare fuses.
Locate the specific fuse, use the fuse puller or pliers to remove the blown fuse, and replace it with a new one of the same amperage.
While there isn’t a strict order, it’s advisable to turn off the ignition and disconnect the battery before replacing fuses for safety.
No, it’s essential to replace a blown fuse with one of the same amperage. Using a higher-rated fuse can lead to damage or fire hazards.
The owner’s manual usually contains a fuse diagram. Additionally, online forums, Chevrolet’s website, or automotive repair websites may have this information.
If the problem persists, it’s advisable to consult a professional mechanic or the Chevrolet dealership for further diagnosis and repair.
While there’s no specific schedule, it’s a good practice to check fuses periodically, especially if you’re experiencing electrical issues with your vehicle.
Useful Link:
View Full PDF: 2024 Chevrolet Trailblazer User Manual | Auto User Guide
2024 Chevrolet Trailblazer Specs, Price, Features, Mileage And Review
2024 Chevrolet Trailblazer Display Instrument Cluster | How to use