2022 Chevrolet Bolt EUV Owners Manual

The 2022 Chevy Bolt EUV is an all-electric small SUV that blends cost and practicality with state-of-the-art electric technology. Expanding upon the triumph of the Bolt EV, the EUV model provides more cabin capacity, transforming it into a cozy five-person electric SUV. With an astounding estimated 247 miles of electric range on a single charge, it meets the needs of customers looking for an eco-friendly and effective substitute for conventional gasoline-powered cars. With its cutting-edge technological features, such as smartphone integration, an easy-to-use infotainment system with a large touchscreen display, and a number of safety and driver assistance systems, the Bolt EUV is an appealing option for environmentally conscious consumers looking for an electric SUV without sacrificing features or space.

2023 CHEVROLET BOLT EUV Specs, Price, Features, Mileage (Brochure)

Instrument Panel Overview

1. Air Vents.
2. Turn and Lane-Change Signals. IntelliBeam System Button. 
3. Regenerative Braking 
4. Instrument Cluster.
   Driver Information Center (DIC).
5. Windshield Wiper/Washer.
6. Infotainment Controls. 
7. Automatic Headlamp System. Charging Status Feedback Indicator Light and Solar Sensor (ILSS). 
8. Infotainment System. 
9. Hazard Warning Flashers 
10. Automatic Climate Control System. Heated and Ventilated Front Seats.
11. Power Outlets.
12. Traction Control/Electronic Stability Control. Lane Keep Assist (LKA).
13. Electric Parking Brake.
14. Shift Switches. 
15. One-Pedal Driving.
16. Wireless Charging.
17. USB Port.
18. Stop/Start Button. 
19. Steering Wheel Controls
20. Horn.
21. Steering Wheel Adjustment
22. Cruise Control.
23. Forward Collision Alert (FCA) System.
24. Hood Release. 
25. Data Link Connector (DLC) (Out of View). 
26. Instrument Panel Fuse Block.
27. Exterior Lamp Controls. Instrument Panel Illumination Control.

2022 Chevrolet Bolt EUV Keys and Locks 

WARNING:
Leaving children in a vehicle with a Remote Keyless Entry (RKE) transmitter is dangerous and children or others could be seriously injured or killed. They could operate the power windows or other controls or make the vehicle move. The windows will function with the RKE transmitter in the vehicle, and children or others could be caught in the path of a closing window. Do not leave children in a vehicle with an RKE transmitter.

Programming with Two Recognized Transmitters
A new transmitter can be programmed to the vehicle when there are two recognized transmitters. To program, the vehicle must be off and all of the transmitters, both currently recognized and new, must be with you.

1. Open the center console. Place the two recognized transmitters in the backup location with the buttons facing down.
2. Remove the key lock cylinder cover on the driver door handle. Insert the vehicle key of the new transmitter into the key lock cylinder on the driver door handle and turn the key to the unlock position five times within 10 seconds. The DIC displays READY FOR REMOTE # 3, 4, 5, 6, 7, or 8.
3. Place the transmitter to be programmed in the backup location with the buttons facing down.
4. Press POWER O to start the vehicle. When the transmitter is learned, the DIC will show that it is ready to program the next transmitter.
5. Remove the transmitter from the backup location and press K or Q.
6. To program additional transmitters, repeat Steps 3–5. When all additional transmitters are programmed, press and hold POWER O for 12 seconds to exit programming mode.
7. Put the key back into the RKE transmitter.
8. Replace the key lock cylinder cap. 

Programming without Two Recognized Transmitters
If two currently recognized transmitters are not available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. This procedure will take approximately 30 minutes to complete. The vehicle must be off and all of the transmitters to be programmed must be with you.

1. Remove the key lock cylinder cover on the driver door handle. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key to the unlock position five times within 10 seconds. The DIC displays REMOTE LEARN PENDING, PLEASE WAIT.
2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press POWER O. The DIC will again show REMOTE LEARN PENDING, PLEASE WAIT.
3. Repeat Step 2 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. The remaining transmitters can be relearned during the next steps. The DIC should now show READY FOR REMOTE # 1.
4. Open the center console. Place the transmitter in the backup location with the buttons facing down.
5. Press POWER O to start the vehicle. When the transmitter is learned, the DIC will show that it is ready to program the next transmitter.
6. Remove the transmitter from the backup location and press K or Q. To program additional transmitters, repeat Steps 4–6.
   When all additional transmitters are programmed, press and hold POWER O for 12 seconds to exit programming mode.
7. Put the key back into the RKE transmitter.
8. Replace the key lock cylinder cap.

Battery Replacement

WARNING:
Never allow children to play with the RKE transmitter. The transmitter contains a small battery, which can be a choking hazard. If swallowed, internal burns can occur, resulting in severe injury or death. Seek medical attention immediately if a battery is swallowed. To avoid personal injury, do not touch metal surfaces on the RKE transmitter when it has been exposed to extreme heat. These surfaces can be hot to the touch at temperatures above 59 °C (138 °F).

CAUTION:
When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter. Always replace the battery with the correct type. Replacing the battery with an incorrect type could potentially create a risk of battery explosion. Dispose of used batteries according to instructions and local laws. Do not attempt to burn, crush, or cut the used battery, and avoid exposing the battery to environments with extremely low air pressures or high temperatures. If the RKE transmitter is not reassembled properly, liquids could enter the housing and damage the circuitry, resulting in an RKE transmitter malfunction and/or failure. To prevent damage, always follow the steps for RKE transmitter reassembly in this manual to ensure the transmitter is sealed properly whenever the RKE transmitter is opened.

Conditions in Which Remote Start Will Not Work

The remote vehicle start feature will not operate if:

• The RKE transmitter is in the vehicle. . The ignition is on.
• The hood is not closed.
• The hazard warning flashers are on.
• The electric drive unit coolant temperature is too high.
• Two remote vehicle starts, or a single remote start with an extension, have already been used.
• The vehicle is not in P (Park).

Door Locks

WARNING:
Unlocked doors can be dangerous.

• Passengers, especially children, can easily open the doors and fall out of a moving vehicle. The doors can be unlocked and opened while the vehicle is moving. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked. So, all passengers should wear seat belts properly and the doors should be locked whenever the vehicle is driven.
• Young children who get into unlocked vehicles may be unable to get out.
• A child can be overcome by extreme heat and can suffer permanent injuries or even death from heat stroke. Always lock the vehicle whenever leaving it.
• Outsiders can easily enter through an unlocked door when you slow down or stop the vehicle. Locking the doors can help prevent this from happening.

To lock or unlock the doors from outside the vehicle:

• Use the key in the driver door to lock and unlock the door without the Remote Keyless Entry (RKE) transmitter. The key cylinder is covered with a cap. See “Driver Door Key Lock Cylinder Access (In Case of Dead Battery)” later in this section.
• Press Q or K on the RKE transmitter to lock and unlock the doors.

FAQ

Useful Link

Chevrolet Bolt EV 2022 User Guide
Download Manuals: https://www.chevrolet.com/support/vehicle/manuals-guides
2023 CHEVROLET BOLT EUV Specs, Price, Features, Mileage (Brochure)