Chevrolet Camaro 2022 

An iconic American muscle automobile that epitomizes strength, performance, and style is the 2022 Chevrolet Camaro. Even when it is at a stop, the Camaro’s muscular and unique form radiates raw vitality. It has a variety of strong engines under the hood, from strong V6s to strong V8s, making for an exciting driving experience. The Camaro offers precise handling and an exhilarating ride whether you’re blasting up the track or cruising along the open road. You can personalize the Camaro to your tastes with the numerous trims and options, and the driver-focused cockpit is outfitted with contemporary technology. The 2022 Chevrolet Camaro, a representation of American automotive excellence, never fails to win over drivers who are passionate about performance and aesthetics.

2023 CHEVROLET CAMARO Specs, Price, Features, Mileage (Brochure)

Instrument Panel Overview

1. Air Vents.
2. Instrument Panel Illumination Control.
3. Exterior Lamp Controls.
   Turn Signal Lever. Headlamp High/Low-Beam Changer.
4. Tap Shift (If Equipped). 
5. Instrument Cluster.
6. Windshield Wiper/Washer.
7. Infotainment. 
8. Light Sensor. 
9. Automatic Climate Control System or Dual Automatic Climate Control System (If Equipped). Heated and Ventilated Front Seats.
10. Shift Lever. See Automatic Transmission or Manual Transmission.
11. Power Outlets.
12. Electric Parking Brake.
13. Traction Control/Electronic Stability Control. Driver Mode Control.
14. Hazard Warning Flashers.
15. ENGINE START/STOP Button. 
16. Steering Wheel Controls. Driver Information Center (DIC) Controls. 
17. Audio Controls. 
18. Horn.
19. Steering Wheel Adjustment.
20. Cruise Control. Heated Steering Wheel. Forward Collision Alert (FCA) System
21. Head-Up Display (HUD).
22. Data Link Connector (DLC) (Out of View). 

Keys and Locks

WARNING:
Leaving children in a vehicle with a Remote Keyless Entry (RKE) transmitter is dangerous and children or others could be seriously injured or killed. They could operate the power windows or other controls or make the vehicle move. The windows will function with the RKE transmitter in the vehicle, and children or others could be caught in the path of a closing window. Do not leave children in a vehicle with an RKE transmitter.

Keyless Unlocking/Locking from the Passenger Door
When the doors are locked and the RKE transmitter is within 1 m (3 ft) of the passenger door handle, pressing the lock/unlock button on the passenger door handle will unlock all doors.
Pressing the lock/unlock button will cause all doors to lock if any of the following occur:

• The lock/unlock button was used to unlock all doors.
• Any vehicle door has opened and all doors are now closed.

If equipped, keyless unlocking of the exterior door handles and trunk can be disabled and enabled.

Disabling Keyless Unlocking:
With the vehicle off, press and hold Q and K on the RKE transmitter at the same time for approximately three seconds. The turn signal lamps will flash four times quickly to indicate access is disabled. Using any exterior handle to unlock the doors or open the trunk will cause the turn signal lamps to flash four times quickly, indicating access is disabled. If disabled, disarm the alarm system before starting the vehicle. Disabling Keyless Unlocking may also be configured under Vehicle Personalization.

Enabling Keyless Unlocking:
With the vehicle off, press and hold Q and K on the RKE transmitter at the same time for approximately three seconds. The turn signal lamps will flash twice quickly to indicate access is enabled. Enabling Keyless Unlocking may also be configured under Vehicle Personalization.

Passive Locking
With Keyless Access the vehicle will lock several seconds after all doors are closed if the vehicle is off and at least one transmitter has been removed or none remain in the vehicle. If other electronic devices interfere with the RKE transmitter signal, the vehicle may not detect the RKE transmitter inside the vehicle. If passive locking is enabled, the doors may lock with the RKE transmitter inside the vehicle. Do not leave the RKE transmitter in an unattended vehicle. To customize the doors to automatically lock when exiting the vehicle.

Temporary Disable of Passive Locking
Temporarily disable passive locking by pressing and holding K on the interior door switch with a door open for at least four seconds, or until three chimes are heard. Passive locking will then remain disabled until Q on the interior door is pressed, or until the vehicle is turned on.

Remote Left In Vehicle Alert
When the vehicle is turned off and an RKE transmitter is left in the vehicle, the horn will chirp three times after all doors are closed.

Remote No Longer In Vehicle Alert
If the vehicle is on with a door open, and then all doors are closed, the vehicle will check for RKE transmitters inside. If an RKE transmitter is not detected, the Driver.

Programming with Recognized Transmitters
A new transmitter can be programmed to the vehicle when there are two recognized transmitters. To program, the vehicle must be off and all of the transmitters, both currently recognized and new, must be with you.

1. Remove the key from the RKE transmitter.
2. Place the two recognized transmitters in the rear cupholder in the center console.
3. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the new transmitter into the key lock cylinder on the driver door handle and turn the key to the unlock position five times within 10 seconds.
4. The DIC displays READY FOR REMOTE #3, 4 5, 6,7, or 8.
5. Replace the recognized transmitters with a new transmitter. Place the new transmitter in the rear cupholder in the center console.
6. Press ENGINE START/STOP. When the transmitter is learned, the DIC will show that it is ready to program the next transmitter.
7. Remove the transmitter from the cupholder and press K or Q. To program additional transmitters, repeat Steps 3–5.
8. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
9. Put the key back into the transmitter.
10. Replace the key lock cylinder cap on the driver door handle. 

Programming without Recognized Transmitters
If two currently recognized transmitters are not available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. This procedure will take approximately 30 minutes to complete. The vehicle must be off and all of the transmitters to be programmed must be with you.

1. Remove the key from the RKE transmitter.
2. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key to the unlock position five times within 10 seconds. The DIC displays REMOTE LEARN PENDING, PLEASE WAIT.
3. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press ENGINE
4. START/STOP. The DIC display will again show REMOTE LEARN PENDING, PLEASE WAIT.
5. Repeat Step 2 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. The remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1.
6. Place the new transmitter into the rear cupholder in the center console.
7. Press ENGINE START/STOP. When the transmitter is learned, the DIC will show that it is ready to program the next transmitter.
8. Remove the transmitter from the cupholder and press K or Q. To program additional transmitters, repeat Steps 4–6.
9. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
10. Put the key back into the transmitter.
11. Replace the key lock cylinder cap on the driver door handle.

Battery Replacement

WARNING:
Never allow children to play with the RKE transmitter. The transmitter contains a small battery, which can be a choking hazard. If swallowed, internal burns can occur, resulting in severe injury or death. Seek medical attention immediately if a battery is swallowed. To avoid personal injury, do not touch metal surfaces on the RKE transmitter when it has been exposed to extreme heat. These surfaces can be hot to the touch at temperatures above 59 °C (138 °F).

CAUTION:
When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter. Always replace the battery with the correct type. Replacing the battery with an incorrect type could potentially create a risk of battery explosion. Dispose of used batteries according to instructions and local laws. Do not attempt to burn, crush, or cut the used battery, and avoid exposing the battery to environments with extremely low air pressures or high temperatures. If the RKE transmitter is not reassembled properly, liquids could enter the housing and damage the circuitry, resulting in an RKE transmitter malfunction and/or failure. To prevent damage, always follow the steps for RKE transmitter reassembly in this manual to ensure the transmitter is sealed properly whenever the RKE transmitter is opened.

FAQ

Useful Link

Chevrolet Colorado 2022 User Guide
Download Manuals: https://www.chevrolet.com/support/vehicle/manuals-guides
2023 CHEVROLET CAMARO Specs, Price, Features, Mileage (Brochure)