Dashboard Indicators: 2022 Chevrolet Spark 1500 Cluster Guide
The dashboard of the 2022 Chevrolet Spark 1500 is very complete, with many signs that are meant to make driving easier and safer. The cluster guide has an easy-to-use design that lets you see important information quickly. The usual speedometer and tachometer are two of the many indicators. They show real-time information about the vehicle’s speed and engine RPM, giving you the best control over how it runs. The fuel gauge also lets drivers know how much fuel they have left, and the temperature gauge checks the engine water levels, which are very important for keeping the engine healthy. Warning lights, like the check engine light and the tyre pressure monitoring system (TPMS), let you know when repair needs to be done and make sure you stay safe while driving. With its easy-to-use layout and useful collection of gauges, the 2022 Chevrolet Spark 1500’s dashboard cluster is a reliable friend for drivers that makes the whole driving experience better.
2023 Chevrolet Traverse Review, Price, Features And Mileage (Brochure)
Instrument Cluster
English Shown, Metric Similar
- Fuel Gauge
- Tachometer
- Speedometer
- Driver Information Center (DIC)
Speedometer
The speedometer shows the vehicle speed in kilometres per hour (km/h) and miles per hour (mph).
Odometer
The odometer shows how far the vehicle has been driven, in either kilometres or miles.
Trip Odometer
The trip odometer shows how far the vehicle has been driven since the trip odometer was last reset. The trip odometer is accessed and reset through the Driver Information Center (DIC). See Driver Information Center (DIC)
Tachometer
The tachometer displays the engine speed in revolutions per minute (rpm).
Caution
If the engine is operated with the rpm in the warning area at the high end of the tachometer, the vehicle could be damaged, and the damage would not be covered by the vehicle warranty. Do not operate the engine with the rpm in the warning area.
Fuel Gauge
When the ignition is on, the fuel gauge shows how much fuel is left in the
fuel tank.
There is an arrow near the fuel gauge pointing to the side of the vehicle the fuel door is on.
When the indicator is empty, a message in the Driver Information Center (DIC) displays. There still is a little fuel left, but the vehicle should be refuelled soon.
Here are three things that some owners ask about. None of these show a problem with the fuel gauge:
- It takes a little more, or less fuel to fill up than the gauge indicated. For example, the gauge may have indicated the tank was half full, but it took a little more, or less than half the tank’s capacity to fill the tank.
- The gauge moves a little while turning a corner, speeding up or braking.
- The gauge takes a few seconds to stabilize after the ignition is turned on and goes back to empty when the ignition is turned off.
Seat Belt Reminders
Driver Seat Belt Reminder Light
There is a driver seat belt reminder light on the instrument cluster.
When the vehicle is started, this light flashes and a chime may come on to remind the driver to fasten the seat belt. Then the light stays on solid until the belt is buckled. This cycle may continue several times if the driver remains or becomes unbuckled while the vehicle is moving. If the driver seat belt is buckled, neither the chime nor the light comes on.
Front Passenger Seat Belt Reminder Light
The vehicle may have a front passenger seat belt reminder light near the passenger airbag status indicator.
When the vehicle is started, this light flashes and a chime may come on to remind in front of passenger to fasten the seat belt. Then the light stays on solid until the belt is buckled. This cycle may continue several times if the passenger remains or becomes unbuckled while the vehicle is moving.
If the passenger seat belt is buckled, neither the chime nor the light comes on.
The front passenger seat belt reminder light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop, or other electronic device. To turn off the reminder light and/or chime, remove the object from the seat or buckle the seat belt.
Airbag Readiness Light
This light shows if there is an electrical problem with the airbag system. It is located in the instrument cluster. The system check includes the airbag sensor(s), the passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System.
The airbag readiness light comes on for several seconds when the] vehicle is started. If the light does not come on then, have it fixed immediately.
Warning
If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away.
If there is a problem with the airbag system, a Driver Information Center (DIC) message may also come on.
Passenger Airbag Status Indicator
The vehicle has a passenger sensing system. See Passenger Sensing System 0 42 for important safety information. The overhead console has a passenger airbag status indicator.
When the vehicle is started, the passenger airbag status indicator will light ON and OFF, or the symbols for on and off, for several seconds as a system check. Then, after several seconds, the status indicator will light either ON or OFF, or the on or off symbol to let you know the status of the front outboard passenger frontal airbag and knee airbag.
If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the front outboard passenger frontal airbag and knee airbag are allowed to inflate.
If the word OFF or the off symbol is lit on the passenger airbag status indicator, it means that the passenger sensing system has turned off the front outboard passenger frontal airbag and knee airbag.
If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service.
Warning
If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness Light 0 73 for more information, including important safety information.
Charging System Light
The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working. It should go out when the engine is started.
If the light stays on or comes on while driving, there may be a problem with the electrical charging system. Have it checked by your dealer. Driving while this light is on could drain the battery.
When this light comes on or is flashing, the Driver Information Center (DIC) also displays a message.
If a short distance must be driven with the light on, be sure to turn off all accessories, such as the radio and air conditioner. Find a safe place to stop the vehicle.
Malfunction Indicator Lamp (Check Engine Light)
This light is part of the vehicle’s emission control onboard diagnostic system. If this light is on while the engine is running, a malfunction has been detected and the vehicle may require service. The light should come on to show that it is working when the ignition is on with the engine not running for Key Access or in Service Mode for Keyless Access. See Ignition Positions (Keyless Access) or Ignition Positions (Key Access).
Malfunctions are often indicated by the system before any problem is noticeable. Being aware of the light and seeking service promptly when it comes on may prevent damage.
Caution
If the vehicle is driven continually with this light on, the emission control system may not work as well, the fuel economy may be lower, and the vehicle may not run smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty.
Caution
Modifications to the engine, transmission, exhaust, intake, or fuel system, or the use of replacement tyres that do not meet the original tyre specifications, can cause this light to come on. This could lead to costly repairs not covered by the vehicle warranty. This could also affect the vehicle’s ability to pass an Emissions Inspection/Maintenance test. See Accessories and Modifications.
If the light is flashing: A malfunction has been detected that could damage the emission control system and increase vehicle emissions. Diagnosis and service may be required.
To help prevent damage, reduce vehicle speed and avoid hard accelerations and uphill grades.
If the light continues to flash, find a safe place to park. Turn the vehicle off and wait at least 10 seconds before restarting the engine. If the light is still flashing, follow the previous guidelines and see your dealer for service as soon as possible.
If the light is on steady: A malfunction has been detected. Diagnosis and service may be required.
Check the following:
- A loose or missing fuel cap may cause the light to come on. See Filling the Tank 0 156. A few driving trips with the cap properly installed may turn the light off.
- Poor fuel quality can cause inefficient engine operation and poor driveability, which may go away once the engine is warmed up. If this occurs, change the fuel brand. It may require at least one full tank of the proper fuel to turn the light off. See Recommended Fuel.
If the light remains on, see your dealer.
Emissions Inspection and Maintenance Programs
If the vehicle requires an Emissions Inspection/Maintenance test, the test equipment will likely connect to the vehicle’s Data Link Connector (DLC).
The DLC is under the instrument panel to the left of the steering wheel. Connecting devices that are not used to perform an Emissions Inspection/Maintenance test or to service the vehicle may affect vehicle operation. See Add-On Electrical Equipment 0 158. See your dealer if assistance is needed.
The vehicle may not pass inspection if:
- The light is on when the engine is running.
- The light does not come on when the ignition is on with the engine not running for Key Access or in Service Mode for Keyless Access.
- Critical emission control systems have not been completely diagnosed. If this happens, the vehicle will not be ready for inspection and might require several days of routine driving before the system is ready for inspection. This can happen if the 12-volt battery has recently been replaced or run down, or if the vehicle has been recently serviced.
See your dealer if the vehicle will not pass or cannot be made ready for the test.
Service Vehicle Soon Light
For vehicles with this light, it comes on if a condition exists that may require the vehicle to be taken in for service. If the light comes on, take the vehicle to your dealer for service as soon as possible.
Owner Manual Indicator
This symbol is shown when you need to see the owner’s manual for additional instructions or information
Brake System Warning Light
This light should come on briefly when the vehicle is turned on. If it does not come on then, have it fixed so it will be ready to warn you if there is a problem.
When the vehicle is on, the brake system warning light also comes on when the parking brake is set. The light stays on if the parking brake does not fully release. If it stays on after the parking brake is fully released, there is a brake problem. Have the brake system inspected right away.
If the light comes on while driving, pull off the road and stop carefully. The brake pedal might be harder to push, or the brake pedal may go closer to the floor. It could take longer to stop. If the light is still on, have the vehicle towed for service. See Towing the Vehicle.
Warning
The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash.
If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service.
Antilock Brake System (ABS) Warning Light
This warning light should come on briefly when the vehicle is turned on. If the light does not come on, have it fixed so it will be ready to warn if there is a problem.
If the light comes on while driving, safely stop as soon as it is possible and turn off the vehicle. Then turn on the vehicle again to reset the system.
If the ABS warning light stays on or comes on again while driving, the vehicle needs service. A chime may also sound when the light stays on.
If the ABS warning light is the only light on, the vehicle has regular brakes, but ABS is not functioning.
If both the ABS warning light and the brake system warning light are on, ABS is not functioning and there is a problem with the regular brakes. See your dealer for service.
2023 Chevrolet Traverse Review, Price, Features And Mileage (Brochure)
Operate Pedal Light
This light comes on when the clutch or brake pedal needs to be applied to start the vehicle.
Up-Shift Light
The vehicle may have an up-shift light. When this light comes on, shift to the next higher gear if weather, road, and traffic conditions allow.
Power Steering Warning Light
This light comes on briefly when the ignition is turned on as a check to show it is working.
If it does not come on have the vehicle serviced by your dealer. If this light stays on or comes on while driving, the system may not be working. If this happens, see your dealer for service.
Lane Departure Warning (LDW) Light
This light is green if LDW is on and ready to operate. This light changes to amber and flashes to indicate that the lane marking has been crossed without using a turn signal in that direction.
Vehicle Ahead Indicator
If equipped, this indicator will display green when a vehicle is detected ahead and amber when you are following a vehicle ahead much too closely.
Ultrasonic Parking Sensor Light
If equipped, this light comes on briefly while starting the vehicle. If it does not come on, have the vehicle serviced. This light indicates a malfunction in the system. See your dealer for service.
Traction Off Light
This light comes on briefly when the vehicle is turned on. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off.
The traction off light comes on when the Traction Control System (TCS) has been turned off. If StabiliTrak/Electronic Stability Control (ESC) is turned off, TCS is also turned off. To turn TCS and ESC off and on, see Traction Control/Electronic Stability Control.
If TCS is off, wheel spin is not limited unless necessary to help protect the driveline from damage. Adjust driving accordingly.
StabiliTrak OFF Light
This light comes on briefly when the vehicle is turned on. If the light does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off.
This light comes on when the StabiliTrak/ Electronic Stability Control (ESC) system is turned off. If StabiliTrak/ESC is off, the Traction Control System (TCS) is also off. To turn ESC off and on, see Traction Control/ Electronic Stability Control 0 145.
If ESC and TCS are off, the systems do not assist in controlling the vehicle. Adjust driving accordingly.
Traction Control System (TCS)/ StabiliTrak Light
This light comes on briefly when the vehicle is turned on. If the light does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off.
If the light is on and not flashing, the TCS and potentially the StabiliTrak/ESC system are not fully operational and may not assist in maintaining control. Adjust driving accordingly. If the condition persists, see your dealer as soon as possible. A Driver Information Center (DIC) message may be displayed.
The light flashes when the TCS and/or the StabiliTrak/ESC system is actively working. See Traction Control/Electronic Stability Control.
Engine Coolant Temperature Warning Light
This light comes on briefly while starting the vehicle. If it does not, have the vehicle serviced by your dealer. If the system is working normally the indicator light goes off.
Caution
The engine coolant temperature warning light indicates that the vehicle has overheated. Driving with this light on can damage the engine and it may not be covered by the vehicle warranty. See Engine Overheating.
The engine coolant temperature warning light comes on when the engine has overheated.
Tire Pressure Light
If equipped with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the vehicle is started. It provides information about tyre pressures and the TPMS.
When the Light Is On Steady
This indicates that one or more of the tyres are significantly underinflated.
A Driver Information Center (DIC) tyre pressure message may also be displayed. Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label.
When the Light Flashes First and Then Is On Steady
If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on every time the vehicle is started. See Tire Pressure Monitor Operation.
Engine Oil Pressure Light
Caution
Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil low can also damage the engine. The repairs would not be covered by the vehicle warranty. Check the oil level as soon as possible. Add oil if required, but if the oil level is within the operating range and the oil pressure is still low, have the vehicle serviced. Always follow the maintenance schedule for changing engine oil.
This light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem. See your dealer.
Low Fuel Warning Light
A Low Fuel Warning Light near the fuel gauge comes on briefly when the ignition is turned on as a check to show it is working.
It also comes on when the fuel gauge indicator is empty. The light turns off when fuel is added. If it does not, have the vehicle serviced.
Immobilizer Light
The immobilizer light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light stays on and the engine does not start, there could be a problem with the immobilizer system. See Immobilizer Operation (Key Access) 0 19 or Immobilizer Operation (Keyless Access).
Reduced Engine Power Light
The reduced engine power light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer.
This light, along with the malfunction indicator lamp, displays when a noticeable reduction in the vehicle’s performance occurs.
The vehicle can be driven at a reduced speed when the reduced engine power light is on but acceleration and speed might be reduced. If this light stays on, see your dealer as soon as possible for diagnosis and repair.
High-Beam On Light
This light comes on when the high-beam headlamps are in use.
Front Fog Lamp Light
For vehicles with fog lamps, this light comes on when the fog lamps are turned on. The light goes out when the fog lamps are turned off. See Fog Lamps.
Lamps On Reminder
This light comes on when the exterior lamps are in use, except when only the Daytime Running Lamps (DRL) are active.
Cruise Control Light
The cruise control light is white when the cruise control is on and ready, and turns green when the cruise control is set and active.
The light goes out when the cruise control is turned off. See Cruise Control 0 147.
Hood Ajar Light
This light comes on when the hood is open or not securely latched. Before driving, check that the hood is properly closed.
Door Ajar Light
This light comes on when a door is open or not securely latched. Before driving, check that all doors are properly closed.
FAQs
The “Check Engine” light indicates a potential issue with the engine or emissions system.
The “Oil Pressure” warning light alerts you to low oil pressure, which can be detrimental to the engine’s health.
The “Battery” light illuminates when there’s a problem with the vehicle’s charging system.
The “Brake System” warning light indicates a potential issue with the braking system, such as low brake fluid or a malfunction.
The “ABS” light indicates a problem with the Anti-lock Braking System, which may affect the vehicle’s braking performance.
The “Traction Control” light illuminates when there’s a problem with the vehicle’s traction control system.
The “Airbag” warning light indicates a potential issue with the airbag system, and it may not deploy properly in the event of a collision.
The “TPMS” light comes on when one or more tyres have low air pressure, potentially affecting vehicle handling and safety.
The “Engine Temperature” warning light indicates that the engine is overheating, which can cause severe damage if not addressed promptly.
The “Fuel Level” indicator lights up when the fuel level in the tank is low, reminding you to refuel.
The “High Beam” indicator light illuminates when the vehicle’s high beam headlights are engaged.
The “Low Fuel” warning light activates when the fuel level drops to a predetermined level, indicating the need for refuelling soon.
The “Seat Belt” warning light reminds occupants to fasten their seat belts for safety.
The “Cruise Control” indicator light comes on when the cruise control system is active and engaged.
The “Door Ajar” warning light indicates that one or more doors are not fully closed.
Useful Links
View Full PDF: 2022 Chevrolet Spark 1500 User Manual | Auto User Guide
2023 Chevrolet Traverse Review, Price, Features And Mileage (Brochure)
2022 Chevrolet Spark 1500 Display Screen | Warning Messages Guide