Warning Lights Meanings: 2019 Chevrolet Blazer Indicators Guide
Our full guide to understanding the 2019 Chevrolet Blazer’s warning lights and indicators will take you on a trip of illumination. Understanding what your car is trying to say through these lights is very important for keeping you safe and making sure it runs at its best. This guide will explain what each danger light means, so you can quickly figure out what they mean and act accordingly when needed. This guide gives you all the information you need to feel safe driving your Chevrolet Blazer, from important alerts that need your immediate attention to regular maintenance reminders. Come with us as we explain the symbols and signs on your dashboard. This will help you avoid problems and make your driving experience better.
2023 CHEVROLET BLAZER Review, Price, Features And Mileage (Brochure)
Seat Belt Reminders
Driver Seat Belt Reminder Light
There is a driver seat belt reminder light on the instrument cluster.
When the vehicle is started, this light flashes and a chime may come on to remind the driver to fasten their seat belt. Then the light stays on solid until the belt is buckled. This cycle may continue several times if the driver remains or becomes unbuckled while the vehicle is moving.
If the driver seat belt is buckled, neither the light nor the chime comes on.
Front Passenger Seat Belt Reminder Light
The vehicle may have a front passenger seat belt reminder light near the passenger airbag status indicator.
When the vehicle is started, this light flashes and a chime may come on to remind passengers to fasten their seat belts. Then the light stays on solid until the belt is buckled. This cycle continues several times if the front passenger remains or becomes unbuckled while the vehicle is moving.
If the front passenger seat belt is buckled, neither the chime nor the light comes on.
The front passenger seat belt reminder light and chime may come on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop, or other electronic device. To turn off the reminder light and/or chime, remove the object from the seat or buckle the seat belt.
Airbag Readiness Light
This light shows if there is an electrical problem with the airbag system. It is located in the instrument cluster. The system check includes the airbag sensor(s), the passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System.
The airbag readiness light comes on for several seconds when the vehicle is started. If the light does not come on then, have it fixed immediately.
Warning
If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away.
If there is a problem with the airbag system, a Driver Information Center (DIC) message may also come on.
Passenger Airbag Status Indicator
The vehicle has a passenger sensing system. See Passenger Sensing System 0 61 for important safety information. The overhead console has a passenger airbag status indicator.
When the vehicle is started, the passenger airbag status indicator will light ON and OFF, and the symbols for on and off, for several seconds as a system check. Then, after several more seconds, the status indicator will light either ON or OFF, and either the on or off symbol, to let you know the status of the front outboard passenger frontal airbag.
If the word ON, and the on symbol, are lit on the passenger airbag status indicator, it means that the front outboard passenger frontal airbag is allowed to inflate.
If the word OFF, and the off symbol, are lit on the passenger airbag status indicator, it means that the passenger sensing system has turned off the front outboard passenger frontal airbag.
If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service.
Warning
If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness Light 0 134 for more information, including important safety information.
Charging System Light
The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working. The light turns off when the engine is started. If it does not, have the vehicle serviced by your dealer.
If the light stays on or comes on while driving, there may be a problem with the electrical charging system. Have it checked by your dealer. Driving while this light is on could drain the battery.
When this light comes on, the Driver Information Center (DIC) also displays a message.
If a short distance must be driven with the light on, be sure to turn off all accessories, such as the radio and air conditioner.
Malfunction Indicator Lamp (Check Engine Light)
This light is part of the vehicle’s emission control onboard diagnostic system. If this light is on while the engine is running, a malfunction has been detected and the vehicle may require service. The light should come on to show that it is working when the ignition is in Service Mode.
Malfunctions are often indicated by the system before any problem is noticeable. Being aware of the light and seeking service promptly when it comes on may prevent damage.
Caution
If the vehicle is driven continually with this light on, the emission control system may not work as well, the fuel economy may be lower, and the vehicle may not run smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty.
Caution
Modifications to the engine, transmission, exhaust, intake,
or fuel system, or the use of replacement tires that do not meet the original tyre specifications, can cause this light to come on. This could lead to costly repairs not covered by the vehicle warranty. This could also affect the vehicle’s ability to pass an Emissions Inspection/Maintenance test. See Accessories and Modifications 0 259.
If the light is flashing: A malfunction has been detected that could damage the emission control system and increase vehicle emissions. Diagnosis and service may be required.
To help prevent damage, reduce vehicle speed and avoid hard accelerations and uphill grades. If towing a trailer, reduce the amount of cargo being hauled as soon as possible.
If the light continues to flash, find a safe place to park. Turn the vehicle off and wait at least 10 seconds before restarting the engine. If the light is still flashing, follow the previous guidelines and see your dealer for service as soon as possible.
If the light is on steady: A malfunction has been detected. Diagnosis and service may be required.
Check the following:
- If fuel has been added to the vehicle using the capless fuel funnel adapter, make sure that it has been removed. See “Filling the Tank with a Portable Gas Can” under Filling the Tank 0 241. The diagnostic system can detect if the adapter has been left installed in the vehicle, allowing fuel to evaporate into the atmosphere. A few driving trips with the adapter removed may turn off the light.
- Poor fuel quality can cause inefficient engine operation and poor driveability, which may go away once the engine is warmed up. If this occurs, change the fuel brand. It may require at least one full tank of the proper fuel to turn the light off. See Recommended Fuel 0 240.
If the light remains on, see your dealer.
Emissions Inspection and Maintenance Programs
If the vehicle requires an Emissions Inspection/Maintenance test, the test equipment will likely connect to the vehicle’s Data Link Connector (DLC).
The DLC is under the instrument panel to the left of the steering wheel. Connecting devices not used to perform an Emissions Inspection/Maintenance test or service the vehicle may affect vehicle operation. See Add-On Electrical Equipment 0 268. See your dealer if assistance is needed.
The vehicle may not pass inspection if:
- The light is on when the engine is running.
- The light does not come on when the ignition is in Service Mode.
- Critical emission control systems have not been completely diagnosed. If this happens, the vehicle will not be ready for inspection and might require several days of routine driving before the system is ready for inspection. This can happen if the 12-volt battery has recently been replaced or run down, or if the vehicle has been recently serviced.
See your dealer if the vehicle will not pass or cannot be made ready for the test.
Brake System Warning Light
The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need to be working.
If the warning light comes on, there is a brake problem. Have the brake system inspected right away.
This light should come on briefly when the engine is started. If it does not come on then, have it fixed so it will be ready to warn you if there is a problem. If the light comes on and stays on, there is a brake problem.
Warning
The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service.
Electric Parking Brake Light
This light comes on when the parking brake is applied. If the light continues flashing after the parking brake is released, or while driving, there is a problem with the Electric Parking Brake system. A message may also be displayed in the Driver Information Center (DIC).
If the light does not come on or remains flashing, see your dealer.
Service Electric Parking Brake Light
On some vehicles, the service electric parking brake light should come on briefly when the vehicle is started. If it does not come on, have it fixed so it will be ready to warn if there is a problem. For vehicles with the reconfigurable cluster, this light may not come on when the vehicle is started.
If this light stays on, the vehicle should be taken to a dealer as soon as possible. See Electric Parking Brake 0 206. A message may also be displayed in the Driver Information Center (DIC).
Antilock Brake System (ABS) Warning Light
This light comes on briefly when the engine is started.
If the light does not come on, have it fixed so it will be ready to warn if there is a problem.
If the light comes on while driving, stop as soon as it is safely possible and turn off the vehicle. Then start the engine again to reset the system. If the ABS light stays on or comes on again while driving, the vehicle needs service. A chime may also sound when the light comes on steady.
If the ABS light is the only light on, the vehicle has regular brakes, but the antilock brakes are not functioning.
If both the ABS and the brake system warning light are on, the vehicle’s antilock brakes are not functioning and there is a problem with the regular brakes. See your dealer for service.
See Brake System Warning Light 0 137.
Tow/Haul Mode Light
For vehicles with the Tow/Haul Mode feature, this light comes on when the Tow/Haul Mode has been activated. See Tow/Haul Mode 0 204.
Lane Keep Assist (LKA) Light
This light is green if LKA is available to assist.
LKA may assist by gently turning the steering wheel if the vehicle approaches a detected lane marking without using the turn signal in that direction. The LKA light will turn amber.
This light is amber and flashes as a Lane Departure Warning (LDW) alert, to indicate that the lane marking has been crossed. See Lane Keep Assist (LKA) 0 238.
Vehicle Ahead Indicator
If equipped, this indicator will display green when a vehicle is detected ahead and amber when you are following a vehicle ahead much too closely. See Forward Collision Alert (FCA) System 0 229.
FCA/ACC Following Gap Light
If equipped, this light indicates the following gap setting (near, medium, or far) for FCA, and, if equipped, Adaptive Cruise Control (ACC).
Pedestrian Ahead Indicator
If equipped, this indicator will display amber when a nearby pedestrian is detected in front of the vehicle. See Front Pedestrian Braking (FPB) System 0 233.
Traction Off Light
This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off.
The traction off light comes on when the Traction Control System (TCS) has been turned off by pressing and releasing the TCS/StabiliTrak/ Electronic Stability Control (ESC) button.
This light and the StabiliTrak OFF light come on when StabiliTrak/ESC is turned off.
If the TCS is off, wheel speed will be limited when necessary to protect the driveline from damage. Adjust driving accordingly.
StabiliTrak OFF Light
This light comes on briefly when the vehicle is turned on. If the light does not come on, have the vehicle serviced by your dealer.
This light comes on when the StabiliTrak/ Electronic Stability Control (ESC) system is turned off. If StabiliTrak/ESC is off, the Traction Control System (TCS) is also off. If StabiliTrak/ESC and TCS are off, the system does not assist in controlling the vehicle. Turn on the TCS and the StabiliTrak/ESC systems, and the warning light turns off.
See Traction Control/Electronic Stability Control 0 208.
Traction Control System (TCS)/ StabiliTrak Light
This light comes on briefly when the engine is started. If the light does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off.
If the light is on and not flashing, the TCS and potentially the StabiliTrak/ ESC system have been disabled. A Driver Information Center (DIC) message may be displayed. Check the DIC messages to determine which feature(s) are no longer functioning and whether the vehicle requires service.
If the light is on and flashing, the TCS and/or the StabiliTrak/ESC system is actively working.
Tire Pressure Light
For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the vehicle is started. It provides information about tyre pressures and the TPMS.
When the Light Is On Steady
This indicates that one or more of the tyres are significantly underinflated.
A Driver Information Center (DIC) tyre pressure message may also be displayed. Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label.
When the Light Flashes First and Then Is On Steady
If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on at every ignition cycle.
2023 CHEVROLET BLAZER Review, Price, Features And Mileage (Brochure)
Engine Oil Pressure Light
Oil pressure can vary with engine speed, outside temperature, and oil viscosity.
On some models, the oil pump will vary engine oil pressure according to engine needs. Oil pressure may change quickly as the engine speed or load varies. This is normal. If the oil pressure warning light or Driver Information Center (DIC) message indicates oil pressure outside the normal operating range, check the vehicle’s oil as soon as possible.
Caution
Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil low can also damage the engine. The repairs would not be covered by the vehicle warranty. Check the oil level as soon as possible. Add oil if required, but if the oil level is within the operating range and the oil pressure is still low, have the vehicle serviced. Always follow the maintenance schedule for changing engine oil.
This light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer.
If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem. See your dealer.
Low Fuel Warning Light
A Low Fuel Warning Light near the fuel gauge comes on briefly when the ignition is turned on as a check to show it is working.
It also comes on when the fuel gauge indicator is empty. The light turns off when fuel is added. If it does not, have the vehicle serviced.
Security Light
The security light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off.
If the light stays on and the engine does not start, there could be a problem with the theft-deterrent system.
High-Beam On Light
This light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer.
IntelliBeam Light
This light comes on when the IntelliBeam system, if equipped, is enabled. See Exterior Lamp Controls.
Lamps On Reminder
This light comes on when the exterior lamps are in use. See Exterior Lamp Controls
Cruise Control Light
The cruise control light is white when the cruise control is on and ready, and turns green when the cruise control is set and active.
Adaptive Cruise Control Light
This light is white when the Adaptive Cruise Control (ACC, if equipped) is on and ready, and turns green when the ACC is set and active.
Door Ajar Light
This light comes on when a door is open or not securely latched. Before driving, check that all doors are properly closed.
FAQs
The “Check Engine” light typically indicates a problem with the engine or emissions system. It could range from something minor to something more serious.
The “Oil Pressure Low” warning light indicates that the engine’s oil pressure is below the recommended level, which could lead to engine damage if not addressed promptly.
The “Battery Charging System” light indicates a problem with the vehicle’s charging system, which could mean a faulty alternator or battery.
The “Brake System” light indicates a problem with the vehicle’s braking system, such as low brake fluid or a malfunctioning brake system component.
The “Traction Control System” light indicates a problem with the vehicle’s traction control system, which helps maintain traction during acceleration on slippery surfaces.
The “Tire Pressure Monitoring System (TPMS)” light indicates that one or more tires have low air pressure, which could affect vehicle handling and fuel efficiency.
The “ABS Warning” light indicates a problem with the vehicle’s anti-lock braking system, which helps prevent the wheels from locking up during hard braking.
The “Service Vehicle Soon” light indicates a problem with one of the vehicle’s systems.
The “StabiliTrak Off” light indicates that the vehicle’s stability control system has been turned off manually or there is a problem with the system.
The “Lane Keep Assist” light indicates that the vehicle’s lane-keeping assist system is active and helps keep the vehicle within its lane.
The “Forward Collision Alert” light indicates that the vehicle’s forward collision warning system has detected a potential collision with a vehicle or object ahead.
The “Fuel Level Low” light indicates that the vehicle’s fuel level is low and the driver should refuel as soon as possible.
The “Adaptive Cruise Control” light indicates that the vehicle’s adaptive cruise control system is active and automatically adjusting the vehicle’s speed to maintain a safe distance from vehicles ahead.
The “Lane Departure Warning” light indicates that the vehicle is drifting out of its lane without signalling, alerting the driver to take corrective action.
The “Blind Spot Monitoring” light indicates that a vehicle is detected in the blind spot of the 2019 Chevrolet Blazer, warning the driver of potential hazards during lane changes.
The “Hill Descent Control” light indicates that the vehicle’s hill descent control system is active, assisting the driver when descending steep grades.
Useful Links
View Full PDF: Chevrolet Blazer 2019 User Manual | Auto User Guide
2023 CHEVROLET BLAZER Review, Price, Features And Mileage (Brochure)
2019 Chevrolet Blazer Display Warning Messages | TouchScreen Guide