2022 Chrysler Pacifica Keys and Smart Key Operations

Introduction

The 2022 Chrysler Pacifica is an exceptional car that skillfully combines contemporary technology with traditional automotive style. At the core of its cutting-edge features are its sophisticated key systems. We’ll look at the keys and smart key technology that set the 2022 Chrysler Pacifica apart from other minivans in this introduction. The 2022 Chrysler Pacifica may look to be a beautiful and roomy family minivan at first appearance, but there’s more to it than meets the eye. This vehicle’s primary systems are created to offer comfort, security, and cutting-edge functionality that genuinely improve the driving experience. Even if it’s still an option, the classic key fob is just the beginning. With its cutting-edge Smart Key system, the 2022 Pacifica offers a plethora of options.

However, innovation does not end there. The Smart Key on the 2022 Pacifica also has a number of features that simplify daily life. In order to ensure your comfort in any conditions, remote start enables you to warm up or cool down the cabin before you even get inside. Additionally, you can operate the liftgate and power sliding doors with only a touch of the key, making it simple to load up people or goods. Additionally, the Smart Key technology adds another level of security. It can detect your approach to the car and will automatically turn on the door handle pockets and exterior lights to provide a friendly and secure atmosphere, especially in low light. In conclusion, the keys and Smart Key system for the 2022 Chrysler Pacifica mark a significant advancement in terms of vehicle comfort, safety, and modernity. The Pacifica’s essential systems are likely to impress and improve your driving experience, whether you’re a busy parent running a family on the go or simply enjoy the newest in automotive technology.

KEYS

KEY FOB
Your vehicle is equipped with a key fob which supports Passive Entry, Remote Keyless Entry (RKE), Keyless Enter ‘n Go™ (if equipped), Remote Start (if equipped), and remote power liftgate operation. The key fob allows you to lock or unlock the doors and liftgate, optional power liftgate, left power sliding door, and right power sliding door, from distances up to approximately 66 ft (20 m). When any button on the key fob is pushed, or when any signal is being transferred between the key fob and the vehicle, an LED light on the key fob will flash as an indicator. The key fob does not need to be pointed at the vehicle to activate the system. The key fob also contains an emergency key, which is stored in the rear of the key fob.

The emergency key allows for entry into the vehicle should the battery in the vehicle or the key fob become depleted. The emergency key is also for locking/unlocking the glove compartment. You can keep the emergency key with you when valet parking.

NOTE:

1. The key fob’s wireless signal may be blocked if the key fob is located next to a mobile phone, laptop, or other electronic device. This may result in poor performance.
2. If your vehicle is equipped with a Wireless Charging Pad, the key fob may not be detected if it is placed within 6 inches (15 cm) of the pad.
3. With the ignition in the ON position and the vehicle moving at 2 mph (4 km/h), all RKE commands are disabled.

Key Fob

1. LED Light
2. Unlock
3. Liftgate
4. Left Power Sliding Side Door
5. Emergency Key
6. Lock
7. Remote Start
8. Right Power Sliding Side Door
9. Panic Alarm

In case the ignition switch does not change with the push of a button, the key fob may have a low or fully depleted battery. A low key fob battery can be verified by referring to the instrument cluster, which will display directions to follow.

NOTE:

1. A low key fob battery condition may be indicated by a message in the instrument cluster display, or by the LED light on the key fob. If the LED key fob light no longer illuminates from key fob button pushes, then the key fob battery requires replacement.
2. The key fob LED light brightness is designed for indoor light viewing, so the LED light may not be visible in direct sunlight Ú page 327.

To Lock/Unlock The Doors And Liftgate
Push and release the unlock button on the key fob once to unlock the driver’s front door and sliding door or twice within five seconds to unlock all doors and the liftgate. Push and release the lock button on the key fob to lock all doors and the liftgate. When the doors are unlocked, the turn signals will flash and the illuminated entry system will be activated. When the doors are locked, the turn signals will flash and the horn will chirp. Settings in the Uconnect system can change to lights only, chirp only, or both.

Vehicles Equipped With Keyless Enter ‘n Go™ — Passive Entry
If one or more doors are open, or the liftgate is open, the doors can be locked. The doors will unlock again only if the key fob is inside the passenger compartment.
All doors can be programmed to unlock on the first push of the unlock button within Uconnect Settings.

Key Left Vehicle Feature
If a valid key fob is no longer detected inside the vehicle while the vehicle’s ignition system is in the ON/RUN or START position, the message “Key Fob Has Left The Vehicle” will be shown in the instrument cluster display along with an interior chime. An exterior audible and visual alert will also be activated to warn the driver. The vehicle’s horn will rapidly chirp three times along with a single flash of the vehicle’s exterior lights.

NOTE:

1. The doors have to be open and then closed in order for the vehicle to check for the presence of a key fob; the Key Left Vehicle feature will not activate until all of the doors are closed.
2. These alerts will not be activated in situations where the vehicle’s engine is left running with the key fob inside.

Replacing The Battery In The Key Fob
The recommended replacement battery is one CR2032 battery.

NOTE

1. Customers are recommended to use a battery obtained from Mopar®. Aftermarket coin battery dimensions may not meet the original OEM coin battery dimensions.
2. Batteries contain harmful chemicals. Dispose old batteries by placing them in correct containers according to the law or by taking them to a dealership, where they will be handled appropriately.
3. Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further information.
4. Do not touch the battery terminals that are on the back housing or the printed circuit board.
5. Remove the emergency key by pushing the mechanical release button on the side of the key fob with your thumb and then pulling the key out with your other hand.
   
6. Insert a coin or a flat blade screwdriver into the now exposed slot and carefully pry on both sides to disengage the snaps. Gently remove the back cover from the fob, being careful not to damage any of the snaps.
7. Remove the battery by sliding the battery rearward in its pocket until the battery lifts up. Remove the depleted battery from the battery pocket and dispose appropriately.
8. Fit a new battery ensuring that the positive (+) side is facing upwards. Push the battery into the pocket until it is firmly seated in place and secured under both tabs.
9. Align the back cover into its original position and snap it back in place by pushing it against the fob until it is seated all around.

WARNING

1. The integrated key fob contains a coin cell battery. Do not ingest the battery; there is a chemical burn hazard. If the coin cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.
2. If you think a battery may have been swallowed or placed inside any part of the body, seek immediate medical attention.
3. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.

Programming And Requesting Additional Key Fobs
Programming the key fob may be performed by an authorized dealer.

NOTE:

1. Once a key fob is programmed to a vehicle, it cannot be repurposed and reprogrammed to another vehicle.
2. Only key fobs that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a key fob is programmed to a vehicle, it cannot be programmed to any other vehicle.

CAUTION

1. Always remove the key fobs from the vehicle and lock all doors when leaving the vehicle unattended.
2. Always remember to place the Keyless Enter ‘n Go™ Ignition in the OFF position.

Duplication of key fobs may be performed at an authorized dealer. This procedure consists of programming a blank key fob to the vehicle electronics. A blank key fob is one that has never been programmed.

NOTE:

1. When having the Sentry Key Immobilizer system serviced, bring all vehicle keys with you to an authorized dealer.
2. Keys must be ordered to the correct key cut to match the vehicle locks.

KeySense Features — If Equipped
This feature provides the vehicle owner with the ability to customize vehicle settings that can be applied to determine the driving experience for other drivers of the vehicle. The vehicle settings are protected by a unique 4-digit PIN, which the vehicle owner creates when accessing the specific settings for the first time. KeySense also has additional features that are always enabled when the specific key fob is in use that cannot be set by the vehicle owner. While this specific key fob is in use, the vehicle will respond accordingly to the customized vehicle settings and mandatory features. This includes enhanced driving assistance features, increased driver alerts, and the locking of certain optional features. These settings can be selected within the Uconnect system.

KeySense Unique Splash Screen
At vehicle start-up, the KeySense splash screen should inform the driver that the vehicle will be functioning in KeySense mode when the KeySense key is in use.

Start Up Display Features

1. Unique splash screen graphic
2. Telltale illuminated
3. After unique splash screen, and after stored messages are cycled, then start-up KeySense messages (Range & Max Speed) are displayed

The following features are always enabled when this key fob is in use:

1. Entertainment audio muted if front occupied seat belts are not fastened
2. Consistent seat belt unfastened chime
3. Maximum radio volume limited to 15 out of 39
4. Daytime Running Lights
5. Headlights On With Wipers
6. Rain Sensing Wipers
7. Automatic High Beams

SENTRY KEY

The Sentry Key Immobilizer system prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses a key fob, keyless push button ignition and a Radio Frequency (RF) receiver to prevent unauthorized vehicle operation. Therefore, only key fobs that are programmed to the vehicle can be used to start and operate the vehicle. The system cannot reprogram a key fob obtained from another vehicle.
After placing the ignition in the ON/RUN position, the Vehicle Security Light will turn on for three seconds for a bulb check. If the light remains on after the bulb check, it indicates that there is a problem with the electronics. In addition, if the light begins to flash after the bulb check, it indicates that someone attempted to start the engine with an invalid key fob. In the event that a valid key fob is used to start the engine but there is an issue with the vehicle electronics, the engine will start and shut off after two seconds. If the Vehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 seconds), it indicates that there is a fault in the electronics. Should this occur, have the vehicle serviced as soon as possible by an authorized dealer.

CAUTION
The Sentry Key Immobilizer system is not compatible with some aftermarket Remote Start systems. Use of these systems may result in vehicle starting problems and loss of security protection.

All of the key fobs provided with your new vehicle have been programmed to the vehicle electronics.

IGNITION SWITCH

KEYLESS ENTER ‘N GO™ IGNITION
If applicable, refer to the “Hybrid Supplement” for additional information. This feature allows the driver to operate the ignition switch with the push of a button as long as the key fob is in the passenger compartment. The START/STOP ignition button has four operating positions; three of which are labeled and will illuminate when in position. The three positions are OFF, ACC, and ON/RUN. The fourth position is START. During START, RUN will illuminate.

START/STOP Ignition Button

1. OFF
2. ACC
3. ON/RUN

The push button ignition can be placed in the following modes:

OFF

1. The engine is stopped
2. Some electrical devices (e.g. power locks, alarm, etc.) are still available

ACC

1. The engine is stopped
2. Some electrical devices are available (e.g. power windows)

ON/RUN

1. Driving position
2. All electrical devices are available (e.g. climate controls, etc.)

START

1. The engine will start (when foot is on the brake pedal)

The engine only runs with the ignition in the ON/RUN ignition position, or from a Remote Start request.
In case the ignition switch does not change with the push of a button, the key fob may have a low or depleted battery. In this situation, a backup method can be used to operate the ignition switch. Put the nose side (side opposite of the emergency key) of the key fob against the START/STOP ignition button and push to operate the ignition switch.

Backup Starting Method

WARNING

1. When leaving the vehicle, always remove the key fob from the vehicle and lock your vehicle.
2. Never leave children alone in a vehicle, or with access to an unlocked vehicle.
3. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector.
4. Do not leave the key fob in or near the vehicle, or in a location accessible to children, and do not leave the Keyless Enter ‘n Go™ Ignition in the ON/RUN position. A child could operate power windows, other controls, or move the vehicle.
5. Do not leave children or animals inside parked vehicles in hot weather. Interior heat buildup may cause serious injury or death.

CAUTION
An unlocked car is an invitation. Always remove the key fobs from the vehicle and lock all doors when leaving the vehicle unattended.

NOTE

1. The key fob may not be detected by the vehicle Keyless Enter ‘n Go™ system if it is located next to a mobile phone, laptop or other electronic device; these devices may block the key fob’s wireless signal and prevent the Keyless Enter ‘n Go™ system from starting the vehicle.
2. For the proper engine starting procedure,

REMOTE START — IF EQUIPPED

If applicable, refer to the “Hybrid Supplement” for additional information.
This system uses the key fob to start the engine conveniently from outside the vehicle while still maintaining security. The system has a range of 328 ft (100 m). Remote Start is used to defrost windows in cold weather and to reach a comfortable climate in all ambient conditions before the customer enters the vehicle.

NOTE:
Obstructions between the vehicle and key fob may reduce this range.

WARNING

1. Do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon monoxide which is odorless and colorless. Carbon monoxide is poisonous and can cause serious injury or death when inhaled.
2. Keep key fobs away from children. Operation of the Remote Start system, windows, door locks or other controls could cause serious injury or death.

HOW TO USE REMOTE START

Push and release the Remote Start button on the key fob twice within five seconds. The vehicle doors will lock, the parking lights will flash, and the horn will chirp twice (if programmed). Then, the engine will start, and the vehicle will remain in the Remote Start mode for a 15 minute cycle. Pushing the Remote Start button a third time shuts the engine off. To drive the vehicle, push the unlock button, and place the ignition in the ON/RUN position.

NOTE:

1. With Remote Start, the engine will only run for 15 minutes.
2. Remote Start can only be used twice.
3. If an engine fault is present or fuel level is low, the vehicle will start and then shut down after 10 seconds.
4. The parking lights will turn on, and remain on, during Remote Start mode.
5. For security, power window and power sunroof (if equipped) operation are disabled when the vehicle is in the Remote Start mode.
6. The ignition must be placed in the ON/RUN position before the Remote Start sequence can be repeated for a third cycle.

All of the following conditions must be met before the engine will remote start:

1. Gear selector in PARK
2. Doors closed
3. Hood closed
4. Liftgate closed
5. Hazard switch off
6. Brake switch inactive (brake pedal not pressed)
7. Battery at an acceptable charge level
8. Panic button not pushed
9. System not disabled from previous Remote Start event
10. Vehicle Security Light flashing
11. Ignition in OFF position
12. Fuel level meets minimum requirement
13. Vehicle Security system is not signaling an intrusion
14. Malfunction Indicator Light (MIL) is not illuminated

WARNING

1. Do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon monoxide (CO) which is odorless and colorless. Carbon monoxide is poisonous and can cause serious injury or death when inhaled.
2. Keep key fobs away from children. Operation of the Remote Start system, windows, door locks or other controls could cause serious injury or death.

TO EXIT REMOTE START MODE

To drive the vehicle after starting the Remote Start system, either push and release the unlock button on the key fob to unlock the doors, or unlock the vehicle using Keyless Enter ‘n Go™ — Passive Entry via the door handles, and disarm the Vehicle Security system (if equipped). Then, prior to the end of the 15 minute cycle, push and release the START/STOP ignition button. The Remote Start system will turn the engine off with another push and release of the Remote Start button on the key fob, or if the engine is allowed to run for the entire 15 minute cycle. Once the ignition is placed in the ON/RUN position, the climate controls will resume previously set operations (temperature, blower control, etc.).

NOTE

1. For vehicles equipped with the Keyless Enter ‘n Go™ — Passive Entry feature, the message “Remote Start Active — Push Start Button” will show in the instrument cluster display until you push the START/STOP ignition button.
2. To avoid unintentional shutdowns, the system will disable for two seconds after receiving a valid Remote Start request.

REMOTE START FRONT DEFROST ACTIVATION — IF EQUIPPED

When Remote Start is active, and the outside ambient temperature is 40°F (4.5°C) or below, the system will automatically activate front defrost for 15 minutes or less. The time is dependent on the ambient temperature. Once the timer expires, the system will automatically adjust the settings depending on ambient conditions. See “Remote Start Comfort Systems — If Equipped” in the next section for detailed operation.

REMOTE START COMFORT SYSTEMS — IF EQUIPPED

When Remote Start is activated, the front and rear defrost will automatically turn on in cold weather. The heated steering wheel and driver heated seat feature will turn on if selected in the Comfort menu screen within Uconnect Settings Ú page 164. In warm weather, the driver vented seat feature will automatically turn on when Remote Start is activated, if programmed in the Comfort menu screen. The vehicle will adjust the climate control settings depending on the outside ambient temperature.

Automatic Temperature Control (ATC) — If Equipped
The climate controls will be automatically adjusted to the optimal temperature and mode settings depending on the outside ambient temperature. This will occur until the ignition is placed in the ON/RUN position where the climate controls will resume their previous settings.

Manual Temperature Control (MTC) — If Equipped

1. In ambient temperatures at 40°F (4.5°C) or below, the climate settings will default to maximum heat, with fresh air entering the cabin. If the front defrost timer expires, the vehicle will enter Mix Mode.
2. In ambient temperatures from 40°F (4.5°C) to 78°F (26°C), the climate settings will be based on the last settings selected by the driver.
3. In ambient temperatures at 78°F (26°C) or above, the climate settings will default to MAX A/C, Bi-Level mode, with Recirculation on.

For more information on ATC, MTC, and climate control settings.

NOTE:
These features will stay on through the duration of Remote Start until the ignition is placed in the ON/RUN position. The climate control settings will change, and exit automatic operation, if manually adjusted by the driver while the vehicle is in Remote Start mode. This includes the OFF button on the climate controls, which will turn the system off.

REMOTE START WINDSHIELD WIPER DE-ICER ACTIVATION — IF EQUIPPED

When the Remote Start system is active and the outside ambient temperature is less than 33°F (0.6°C), the Windshield Wiper De-Icer will activate. Exiting Remote Start will resume its previous operation. If the Windshield Wiper De-Icer was active, the timer and operation will continue.

REMOTE START CANCEL MESSAGE

One of the following messages will display in the instrument cluster if the vehicle fails to remote start or exits Remote Start prematurely:

1. Remote Start Canceled — Door Open
2. Remote Start Canceled — Hood Open
3. Remote Start Canceled — Fuel Low
4. Remote Start Canceled — Liftgate Open
5. Remote Start Canceled — Too Cold
6. Remote Start Canceled — Time Expired
7. Remote Start Disabled — Start Vehicle To Reset

The message will stay active until the ignition is placed in the ON/RUN position.

FAQs

Useful Link

Download Link: 2022 Chrysler Pacifica Owner’s Manual
2022 Chrysler Pacifica Keys and Smart Key Operations