2022 Chrysler Voyager Seat Setup 

In the world of automotive design, the 2022 Chrysler Voyager Seat exemplifies the union of style, comfort, and functionality. This vehicle’s inviting and capacious interior, with its modern design and innovative features, makes it an excellent option for families and individuals. As we delve deeper, you’ll see how the Voyager Seat combines modern technology, superior craftsmanship, and a commitment to safety to create an unparalleled driving experience. Whether you’re embarking on a daily commute or a cross-country journey, the 2022 Chrysler Voyager Seat pledges to make every trip an unforgettable experience.

SEATS

Seats are a part of the Occupant Restraint system of the vehicle.

WARNING

1. It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
2. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed.
3. Be sure everyone in your vehicle is in a seat and using a seat belt properly.

MANUAL ADJUSTMENT (FRONT SEATS) — IF EQUIPPED

WARNING

1. Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked.
2. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.

Manual Front Adjuster
If equipped with manual front seats, they are adjustable forward or rearward. The manual seat adjustment handle is located under the seat cushion at the front edge of each seat.

Manual Seat Adjustment

1. Forward/Rearward Adjustment Handle
2. Height Adjustment (if equipped)
3. Recline Lever

While sitting in the seat, pull up on the handle and slide the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.

WARNING

1. Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
2. Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.

Manual Seat Height Adjustment — If Equipped
The seat height can be raised or lowered by using a lever, located on the outboard side of the seat. Pump the lever upward to raise the seat height or pump the lever downward to lower the seat height.

Manual Front Seat Recline Adjustment
For models equipped with manual seats, the recline lever is located on the outboard side of the seat.
To recline, lean forward slightly, lift the lever and push back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position. Using body pressure, lean forward and rearward on the seat to be sure the seatback has latched.

WARNING
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.

MANUAL ADJUSTMENT (REAR SEATS)

WARNING

1. Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked.
2. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision, you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.

Manual Forward/Rearward Adjustment — Quad Seats (If Equipped)
Both second-row seats are adjustable forward or rearward. The manual seat adjustment handle is located under the seat cushion at the front edge of each seat.

WARNING!

• Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
  In a collision, you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.

Manual Forward/Rearward Adjustment — Quad Seats (If Equipped)
Both second-row seats are adjustable forward or rearward. The manual seat adjustment handle is located under the seat cushion at the front edge of each seat.

Manual Rear Seat Adjuster

While sitting in the seat, pull up on the handle and slide the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.

WARNING

1. Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
2. Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.

Manual Recline — Quad Seats

Recline Lever

To recline, lean forward slightly, lift the lever, and push back to the desired position and release the lever. Lean forward and lift the lever to return the seat back to its normal position. Using body pressure, lean forward and rearward on the seat to be sure the seatback has latched.

WARNING
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision, you could slide under the seat belt, which could result in serious injury or death.

Second Row Bench Seat — If Equipped
The second-row bench seat can accommodate two passengers while providing easy access to the third-row seats without any folding of the second-row seats.
To recline the seatback, lean forward slightly, lift the recline lever located on the outboard side of the seat cushion, and push back to the desired position and release the lever. Lean forward and lift the lever to return the seat back to its normal position. Using body pressure, lean forward and rearward on the seat to be sure the seatback has latched.

Recline Lever

The bench seat does not stow in the floor but is removable for added cargo space.

Removing The Bench Seat

1. Adjust the driver and passenger seats forward to allow room for the bench seat removal.
2. Raise the armrest completely, then lift the recline lever located on the outboard side of the seat to fold the seatback flat against the seat cushion.
   Folded Position
3. Pull the release strap located behind the seat, in the center near the floor to release the latches.
   Release Strap Location
4. Once the latches are released, tilt the entire seat toward the front of the vehicle. The seat can now be removed through either sliding side door, or through the liftgate.
5. Tilt Bench Seat Forward

NOTE:

• Due to the weight of the bench seat, it is recommended that two people are utilized for its removal.
• When storing the removed bench seat, it is important to keep the seatback in the folded position.

Reinstalling The Bench Seat

1. To reinstall the bench seat, align the seat’s front attachments into the detent positions on the floor.
2. Tilt seat rearward to lock the seatback into its original position.
   NOTE:
   Push downward to ensure the rear latches are in the locked position.
3. Lift the recline handle and return the seat back to the seating position.

WARNING!
If not properly latched, the seat could become loose. Personal injuries could result.

Second Row Removable 8th Seat — If Equipped
While the 8th seat does not stow in the floor, it is foldable and removable for added cargo space.

Second Row 8th Seat Fold Flat Strap

The release strap is located on the front of the seat, near the floor. To remove the seat, pull the release strap to release the rear latches. The seat assembly can now be removed from the vehicle by moving it in a rearward direction from the detent positions in the floor.

Release Strap

NOTE:
Seat can be removed easier with one outboard seat stowed in the load floor.
To reinstall the seat, align the seat into the detent positions on the floor. Tilt seat rearward to lock the seatback into its original position.

In Floor Detent Guides

WARNING
If not properly latched, the seat could become loose. Personal injuries could result.

Fold-Flat Quad Seats And Stow ‘n Go Seats

NOTE:

1. You may experience deformation in the seat cushion from the seat belt buckles, or wrinkling of the seat fabric if the seats are left folded for an extended period of time. This is normal and by simply unfolding the seats to the open position, over time the seat cushion may return to its normal shape. Having an occupant sit in the seat, or massaging the fabric by hand may smooth away any excess wrinkling.
2. Permanent wrinkles may still result.

To fold the seat, lift the recliner lever to the full upward position and push the seatback forward until it rests on the seat cushion.

Fold-Flat Seat Recline Lever

NOTE

1. The seatback may lock into the fold-flat position. Use the recline lever to unlock the seatback.
2. If equipped with Stow ‘n Go seating: when returning the seat to the original position, the headrest must be folded back to the original position.

Stow ‘n Go Seating Head Restraint

Easy Entry

Easy Tilt Seat — With Or Without Child Seat Installed
The second-row seats can be tilted forward for easy entry into the third row with or without a child seat installed.

1. Located in the seatback of the second-row seat is a lever (or handle for Stow ‘n Go seats) that provides easier access to the third row by tilting the seat forward.
2. Slide the lever upwards, or if equipped, pull the handle forward, to unlock the seatback.
   Lift Easy Tilt Seat Lever (If Equipped)
   Pull Easy Tilt Seat Handle (If Equipped)
3. Push on the seatback to slide seat forward to access the third row.
   Easy Tilt Seat
   Easy Tilt With Child Seat Installed
4. To put the seat back into its original position, just pull back on the seatback and lock the seat into position.

WARNING!
Do not use this feature with a child in a seat. Serious injury or death may occur.

Easy Entry — With The Seat Folded Flat
The seats can be folded and tilted for more accessibility for passengers to enter and exit the third row.

1. Without a child seat installed, you can fold the seat by pulling the recliner handle on the bottom part of the seat. Before pulling the recliner lever, make sure the arm rests are folded up.
   Recliner Lever
2.  To put it back into position, pull back on the folseat and make sure that it locks into position. Then, pull the seat back toward the back and fold down the armrests.

Exit For Third Row Passengers Stown Go Seats Only
If the second row is equipped with Stow ‘n Go, third-row passengers can pull the strap and push the seat forward to fold the seat back down and tilt the seat to the floor for an easy exit.

Pull Strap For Third Row Passengers
NOTE:
This process is for when there is no child seat installed. Use the easy entry lever if a child seat is installed.

Second Row Removable Quad Seat
The second-row quad seats, not equipped with the Stow Go feature, are removable for added cargo space.

Removing Seat

1. Adjust seat to the full rearward position.
2. Lift the recline lever to fold the seatback flat against the seat cushion.
   Fold-Flat Seat Recline Lever
   NOTE:
   Push downward on the seatback to make sure it is in the locked position.
3. The release strap is located on the front of the seat, near the floor.
   To remove the seat, pull the release strap to release the rear latches.
4. Tilt the back of the seat to the upward position.
   Tilt Seat Forward
5. The seat assembly can now be removed from the vehicle. Grab the front seatback edge located near the head restraint and the grab the bar on the rear side of the seat cushion for easy removal.
   Seat Removal

Reinstalling Seat

1. To reinstall the seat: With the seat tilted forward, align the seat’s front attachments into the detent positions on the floor.
   In Floor Seat Detents
   Installing Seat
2. Tilt seat rearward to lock the seat back into its original position.
   NOTE:
   Push downward to ensure the rear latches are in the locked position.
3. Lift the recline handle and return the seat back to the seating position.

Manually Folding Third Row Seats —If Equipped

NOTE:

• You may experience deformation in the seat cushion from the seat belt buckles, or wrinkling of the seat fabric if the seats are left folded for an extended period of time. This is normal and by simply unfolding the seats to the open position, over time the seat cushion may return to its normal shape. Having an occupant sit in the seat, or massaging the fabric by hand may smooth away any excess wrinkling.
  Permanent wrinkles may still result.

1. Lower the centre head restraint down to the seatback by pushing the button on the guide and pushing the head restraint down.
2. Pull the release strap marked “1” to release the anchors.
   Release Strap “1”
3. Pull release strap marked “2” and tumble the seat rearward into the storage bin.
   Release Strap “2”

Stowed Third Row Seat
To Unfold Third Row Seats

1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch.
   
   Assist Straps
2. Pulling strap “2” releases the seatback to return to its full upright position.
   Strap “2”
3. Raise the head restraint to its upright position.

To Unfold the Third Row Seats

1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch.
2. Pulling strap “2” releases the seatback to return to its full upright position.
   Strap “2”
3. Raise the head restraint to its upright position.

WARNING

• In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure the seats are fully latched.
• Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision. Always make sure the head restraints are in their upright positions when the seat is to be occupied.

Stow ‘n Go Seating
On vehicles equipped with Stow ‘n Go seating, the second and third-row seats can be folded into the floor for convenient storage.

AUTO-ADVANCE ‘N RETURN — IF EQUIPPED

On vehicles equipped with the Auto Advance ‘n Return feature, the front seat will move forward automatically to a location that will allow the second-row Stow ‘n Go seat movement, without interference by the front seat. After the second-row seat is stowed, the front seat will move back to the previous location once the Auto Advance ‘n Return button is pushed again.
The Auto Advance ‘n Return feature is available to the front driver power seats.

WARNING!
During power seat operation, personal injury or cargo damage may occur. Ensure the front seat is not occupied and the seat travel path is clear when operating the power seat.

A one-touch Auto Advance ‘n Return button is located on the B-pillar trim panel, just in front of the power sliding door.

Auto Advance ‘n Return Button

Using the Auto Advance ‘n Return Feature

NOTE:

• The button is only functional when the power sliding door is open and the vehicle is in PARK. If the door is not open or the vehicle is not in PARK when the button is pushed, the front seat will not move and a message will be displayed in the instrument cluster display.
  If the power sliding door is closing when the button is pushed, the front seat will not move and a message will be displayed in the instrument cluster display.
  The Auto Advance ‘n Return feature will not function if the front doors are open.

1. Push and release the Auto Advance ‘n Return button.
2. Perform the second row Stow ‘n Go seat movement. Refer to “Second Row Stow ‘n Go” in this section for further information.
3. Push and release the Auto Advance ‘n Return button a second time. The front seat cushion and seatback will return to the original starting location.

NOTE:

• To abort seat operation while seat is in motion, push the Auto Advance ‘n Return button, or push the front power seat button to stop the seat movement. Pushing the Auto Advance ‘n Return button again will return the front seat to the original starting location.
  The Auto Advance ‘n Return system includes obstacle detection. When the system detects an obstacle, the seat will stop, reverse direction, and return to the previous location. A message will be displayed in the instrument cluster indicating that an obstacle has been detected.
  If the front seat is already in a location that will allow space for Stow ‘n Go of the second-row seat, the front seat will not move and a message will be displayed in the instrument cluster.
• If calibration of the front seat is lost, the seat will automatically recalibrate when the Auto Advance ‘n Return button is pushed. This may result in the seat cushion moving forward and downward, before moving to the location that will allow space for the second-row Stow ‘n Go seat movement.

SECOND ROW STOW ‘N GO

To stow the seat in the floor, move the front seat all the way forward using the manual seat adjustment bar. Move the seatback all the way forward using the recliner handle located on the outboard side of the cushion. Move the seat height to at least mid-position using the height adjuster handle in the outboard side of the cushion.

1. To access the storage area, remove the floor mat (if equipped) and place the lock rod in the locked position.
   Lock Rod
   NOTE:
   1. Push the lock rod inward for the locked position.
   2. Pull outward on the lock rod for the unlocked position.
   3. For information on storage bin function with the seats rearward.
2. Pull the latch located near the second-row seat to open the floor panel.
   Floor Latch
3. Pull the floor panel and position it toward the front seats while folding the top half down and rest it against the front seats.
   Remove the plastic storage bin from the storage area, and store in a safe location.
4. Fold the armrest upward and stow the seat by grabbing the strap on the lower part of the seatback, and guide the seat into the storage area.
   Pull Strap
5. Push down on the seatback to lock the seat into the storage area. Push To Lock
6. Close the floor by pulling the floor panel backwards by the bottom corner edge of the panel.
   Extend Floor Panel
7. Push down on floor panel to lock into place.
   
8. Readjust the front seat as needed, and replace the floor mat (if equipped).

WARNING
In a collision, serious injury could result if the seat storage bin covers are not properly latched:

1. Do not drive the vehicle with the storage bin covers open.
2. Keep the storage bin covers closed and latched while the vehicle is in motion.
3. Do not use a storage bin latch as a tie-down.

CAUTION

1. The storage bin cover must be latched and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover.
2. Do not sit on the second-row seat when it is in the stowed position with the seatback upright otherwise damage to the seat may occur.

TO UNSTOW SECOND ROW SEATS

To unstow the seat from the floor, move the front seat all the way forward using the manual seat adjustment bar.

1. To access the storage area, remove the floor mat (if equipped) and place the lock rod in the locked position.
   Lock Rod
   NOTE:
   1. Push the lock rod inward for the locked position.
   2. Pull outward on the lock rod for the unlocked position.
2. Pull the latch located near the second-row seat to open the floor panel.
   
3. Pull the floor panel and position it toward the front seats while folding the top half down and rest it against the front seats.
   
4. Pull the strap located on the seat and pull the seat out of the storage area. Push the seat rearward making sure that it locks into the floor. Fold the seatback into the upright position and pull the headrest up.
   NOTE:
   The seatback may be locked, if it is, it will be necessary to use the recliner handle to unlock the back before folding into the upright position.
   
5. Replace the plastic storage bin into the storage area.
6. To position the floor panel back into its original state, grab the bottom corner and extend it outward.
   
7. Lay the floor panel flat and push down until it clicks into position.
   
8. Readjust the front seat as needed, and replace the floor mat (if equipped).

WARNING

1. In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure the seats are fully latched.
2. Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision. Always make sure the head restraints are in their upright positions when the seat is to be occupied.

POWER ADJUSTMENT (FRONT SEATS) — IF EQUIPPED

Some models may be equipped with an eight-way power seat for the driver. The power seat switches are located on the outboard side of the seat. The switches control the movement of the seat cushion and the seatback.

Driver Power Seat Switches

1. Seat Switch
2. Seatback Switch
3. Lumbar Switch

WARNING

1. Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
2. Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
3. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision, you could slide under the seat belt, which could result in serious injury or death.

CAUTION
Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path.

Adjusting The Seat Forward Or Rearward
The seat can be adjusted both forward and rearward by using the seat switch. The seat will move in the direction of the switch. Release the switch when the desired position has been reached.

Adjusting The Seat Up Or Down
The height of the seats can be adjusted up or down. Pull upward or push downward on the rear of seat switch, the seat will move in the direction of the switch. Release the switch when the desired position has been reached.

Tilting The Seat Up Or Down
The angle of the seat cushion can be adjusted in two directions. Pull upward or push downward on the front of the seat switch, the front of the seat cushion will move in the direction of the switch. Release the switch when the desired position has been reached.

Reclining The Seatback
The angle of the seatback can be adjusted forward or rearward. Push the seatback switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position is reached.

WARNING

1. Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
2. Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
3. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.

CAUTION
Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path.

Power Lumbar — If Equipped

Power Lumbar Switch Location

The front driver’s seat may be equipped with a four-way lumbar adjustment. The power lumbar switch is located on the outboard side of the equipped power seat. Push the switch forward or rearward to increase or decrease the lumbar support. Push the switch upward or downward to raise or lower the lumbar support.

HEATED SEATS

Front Heated Seats — If Equipped
The front heated seats control buttons are located in the touchscreen. You can choose from HI, LO or off heat settings.
The indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for HI, one for LO and none for off.

1. Press the heated seat button once to turn the HI setting on.
2. Press the heated seat button a second time to turn the LO setting on.
3. Press the heated seat button a third time to turn the heating elements off.

The level of heat selected will stay on until the operator changes it.

NOTE:

1. Once a heat setting is selected, heat will be felt within two to five minutes.
2. The engine must be running for the heated seats to operate.

For information on use with the Remote Start system,

WARNING

1. Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time.
2. Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat.

FAQs

Useful Link

View Full PDF: 2022 Chrysler Voyager Owner’s Manual| Auto User Guide
2022 Chrysler Voyager Dashboard Warning and Indicator Lights