2022 Chrysler Voyager Specifications
The 2022 Chrysler Voyager is a remarkable addition to the Chrysler family, boasting a combination of design, versatility, and performance that is certain to impress auto enthusiasts and families. This MPV has been meticulously designed to provide an exceptional driving experience while meeting the requirements of contemporary family life. In this introduction, we will examine the specifications and amenities that make the 2022 Chrysler Voyager a standout minivan. The 2022 Chrysler Voyager is designed to meet the requirements of today’s on-the-go families, from its potent engine to its spacious interior, cutting-edge technology, and superior safety features.
VEHICLE IDENTIFICATION NUMBER (VIN)
The VIN is on the left front corner of the instrument panel and is visible from outside of the vehicle through the windshield.
Vehicle Identification Number
NOTE:
It is illegal to remove or alter the VIN.
BRAKE SYSTEM
Your vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems lose normal capability, the remaining system will still function. However, there will be some loss of overall braking effectiveness. You may notice increased pedal travel during application, greater pedal force required to slow or stop, and potential activation of the Brake Warning Light.
In the event power assist is lost for any reason (i.e., repeated brake applications with the engine off) the brakes will still function. However, the effort required to brake the vehicle will be much greater.
WHEEL AND TIRE TORQUE SPECIFICATIONS
Proper lug nut/bolt torque is very important to ensure that the wheel is properly mounted to the vehicle. Any time a wheel has been removed and reinstalled on the vehicle, the lug nuts/bolts should be torqued using a properly calibrated torque wrench using a six-sided (hex) deep wall socket.
TORQUE SPECIFICATIONS
| Lug Nut/Bolt Torque | **Lug Nut/Bolt Size | Lug Nut/Bolt Socket Size |
| 100 ft-lb(135 N·m) | M12 x 1.5 | 19 mm |
Use only authorized dealer-recommended lug nuts/bolts and clean or remove any dirt or oil before tightening.
Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles.
Wheel Mounting Surface
Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it halfway).
Torque Patterns
After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly tightened.
WARNING
To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury.
FUEL REQUIREMENTS
While operating on gasoline with the required octane number, hearing a light knocking sound from the engine is not a cause for concern. However, if the engine is heard making a heavy knocking sound, see a dealer immediately. Use of gasoline with a lower than recommended octane number can cause engine failure and may void or not be covered by the New Vehicle Limited Warranty.
Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experience these symptoms, try another brand of gasoline before considering service for the vehicle.
3.6L ENGINE
Do not use E-85 flex fuel or ethanol blends greater than 15% in this engine.
This engine is designed to meet all emissions regulations and provide optimum fuel economy and performance when using high quality unleaded regular gasoline having a posted octane number of 87 as specified by the (R+M)/2 method. The use of higher octane premium gasoline is not required, as it will not provide any benefit over regular gasoline in these engines.
REFORMULATED GASOLINE
Many areas of the country require the use of cleaner burning gasoline referred to as “reformulated gasoline”. Reformulated gasoline contains oxygenates and are specifically blended to reduce vehicle emissions and improve air quality. The use of reformulated gasoline is recommended. Properly blended reformulated gasoline will provide improved performance and durability of engine and fuel system components.
GASOLINE/OXYGENATE BLENDS
Some fuel suppliers blend unleaded gasoline with oxygenates such as ethanol.
CAUTION
DO NOT use E-85, gasoline containing methanol, or gasoline containing more than 15% ethanol (E-15). Use of these blends may result in starting and drivability problems, damage critical fuel system components, cause emissions to exceed the applicable standard, and/or cause the Malfunction Indicator Light to illuminate. Please observe pump labels as they should clearly communicate if a fuel contains greater than 15% ethanol (E-15).
Problems that result from using gasoline containing more than 15% ethanol (E-15) or gasoline containing methanol are not the responsibility of the manufacturer and may void or not be covered under New Vehicle Limited Warranty.
DO NOT USE E-85 IN NON-FLEX FUEL VEHICLES
Non-Flex Fuel Vehicles (FFV) are compatible with gasoline containing up to 15% ethanol (E-15). Use of gasoline with higher ethanol content may void the New Vehicle Limited Warranty.
If a Non-FFV vehicle is inadvertently fueled with E-85 fuel, the engine will have some or all of these symptoms:
- Undesirable lean conditions
- OBD II Malfunction Indicator Light on
- Poor engine performance
- Poor cold start and cold drivability
- Increased risk for fuel system component corrosion
CNG AND LP FUEL SYSTEM MODIFICATIONS
Modifications that allow the engine to run on Compressed Natural Gas (CNG) or Liquid Propane (LP) may result in damage to the engine, emissions, and fuel system components. Problems that result from running CNG or LP are not the responsibility of the manufacturer and may void or not be covered under the New Vehicle Limited Warranty.
METHYLCYCLOPENTADIENYL MANGANESE TRICARBONYL (MMT) IN GASOLINE
MMT is a manganese-containing metallic additive that is blended into some gasolines to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT. Gasoline blended with MMT reduces spark plug life and reduces emissions system performance in some vehicles. The manufacturer recommends that gasoline without MMT be used in your vehicle. The MMT content of gasoline may not be indicated on the gasoline pump; therefore, you should ask your gasoline retailer whether the gasoline contains MMT. MMT is prohibited in Federal and California reformulated gasoline.
MATERIALS ADDED TO FUEL
Besides using unleaded gasoline with the proper octane rating, gasoline that contains detergents, corrosion and stability additives are recommended. Using gasolines that have these additives will help improve fuel economy, reduce emissions, and maintain vehicle performance. Designated TOP TIER Detergent Gasoline contains a higher level of detergents to further aide in minimizing engine and fuel system deposits. When available, the usage of TOP TIER Detergent gasoline is recommended. Visit www.toptiergas.com for a list of TOP TIER Detergent Gasoline retailers. Indiscriminate use of fuel system cleaning agents should be avoided. Many of these materials intended for gum and varnish removal may contain active solvents or similar ingredients. These can harm fuel system gasket and diaphragm materials.
FUEL SYSTEM CAUTIONS
CAUTION
Follow these guidelines to maintain your vehicle’s performance:
- The use of leaded gasoline is prohibited by Federal law. Using leaded gasoline can impair engine performance and damage the emissions control system.
- An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service. Contact an authorized dealer for service assistance.
- The use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle performance problems resulting from the use of such fuels or additives is not the responsibility of the manufacturer and may void or not be covered under the New Vehicle Limited Warranty.
FLUID CAPACITIES
| US | Metric | |
| Fuel (Approximate) | ||
| 3.6L Engine | 19 Gallons | 71 Liters |
| Engine Oil With Filter | ||
| 3.6L Engine | 5 Quarts | 4.7 Liters |
| Cooling System* | ||
| 3.6L Engine | 13.1 Quarts — Standard Duty Cooling 13.4 Quarts — Heavy Duty Cooling |
12.4 Liters — Standard Duty Cooling 12.7 Liters — Heavy Duty Cooling |
| * Includes heater and coolant reservoir filled to MAX level. | ||
ENGINE FLUIDS AND LUBRICANTS
| Component | Fluid, Lubricant, or Genuine Part |
| Engine Coolant | We recommend you use Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of the manufacturer Material Standard MS.90032. |
| Engine Oil – 3.6L Engine | We recommend you use Mopar® SAE 0W-20 Full Synthetic Engine Oil which meets the requirements of the manufacturer Material Standard MS-6395. Equivalent full synthetic SAE 0W-20 engine oil can be used but must have the API Starburst trademark |
| Engine Oil Filter | We recommend you use a Mopar® Engine Oil Filter. If a Mopar® Engine Oil Filter is unavailable only use filters that meet or exceed SAE/USCAR-36 Filter Performance Requirements. |
| Fuel Selection – 3.6L Engine | 87 Octane (R+M)/2 Method, 0-15% ethanol (Do not use E-85). |
| CAUTION! |
|
CHASSIS FLUIDS AND LUBRICANTS
| Component | Fluid, Lubricant, or Genuine Part |
| Automatic Transmission | Use only Mopar® ZF 8 & 9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. |
| Brake Master Cylinder | We recommend using Mopar® DOT 3 Brake Fluid, SAE J1703 should be used. |
FAQs
What is the engine specification for the 2022 Chrysler Voyager?
A 3.6-liter V6 engine produces 287 horsepower and 262 lb-ft of torque in the 2022 Chrysler Voyager.
The estimated fuel economy range for the Voyager is between 19 and 28 miles per gallon, depending on city and highway travel conditions.
The Voyager offers seating for up to seven passengers, providing ample space for both passengers and cargo.
When properly outfitted, the Voyager has a towing capacity of up to 3,600 pounds.
The Voyager is equipped with a 9-speed automatic transmission for efficient and smooth gear adjustments.
Standard safety features on the 2022 Chrysler Voyager include adaptive cruise control, blind-spot monitoring, and rear cross-traffic alert.
The Voyager includes an intuitive Uconnect infotainment system with a 7-inch touchscreen, Apple CarPlay and Android Auto compatibility.
Yes, the Voyager is offered in LX and LXi trim levels, each of which comes with a variety of features and options.
Yes, the available rear-seat entertainment system with dual 10.1-inch touchscreens is an option.
The Voyager provides ample cargo space, with up to 32,3 cubic feet of space behind the third-row seating and even more with the rear seats folded down.
Color options vary by trim level but typically include Brilliant Black, Granite Crystal, and Ocean Blue, among others.
No, the 2022 Voyager is only offered with front-wheel drive.
The Voyager includes a 3-year/36,000-mile standard basic warranty and a 5-year/60,000-mile standard powertrain warranty.
The standard starting price for the 2022 Chrysler Voyager is approximately $28,700, though this may vary based on trim and options.
Yes, Chrysler offers a variety of upgrade packages and standalone options, allowing you to personalize your Voyager with features such as leather seating, advanced safety packages, and more.
Useful Link
View Full PDF: 2022 Chrysler Voyager Owner’s Manual| Auto User Guide
2022 Chrysler Voyager Engine Oil and Fluids