2023 Chrysler Pacifica Seat Setup Guide

Introduction

The 2023 Chrysler Pacifica emerges as a true monument to innovation, elegance, and family-focused design in the constantly changing world of automotive perfection. The 2023 Pacifica, the newest model in Chrysler’s famed minivan family, expertly blends style and utility while delivering a superior driving experience for families on the go. The 2023 Pacifica attracts attention on the road with ease because to its eye-catching external design, which features a revamped and streamlined look. In addition to enhancing its curb attractiveness, its slender lines, sculpted profile, and distinctive Chrysler grille help optimize aerodynamics for greater efficiency. The 2023 Pacifica’s engine options, which include hybrid models, give you the freedom to select the one that best satisfies your driving requirements and environmental concerns.

The adaptability of the 2023 Chrysler Pacifica, though, is where its genuine charm lies. The Pacifica adjusts to your needs with ease, whether you’re taking the kids to school, going on a family road trip, or just doing errands. Innovative features like the optional FamCamTM interior video system offer peace of mind by watching over your priceless cargo, while Stow ‘n Go seating makes it simple to configure the interior for people or freight. To keep you and your loved ones safe on the road, the 2023 Pacifica is outfitted with a comprehensive package of driver assistance technologies, including adaptive cruise control, lane-keeping assist, and automated emergency braking. The 2023 Chrysler Pacifica, which expertly combines elegance, adaptability, and innovation, stands as the peak of minivan perfection. It’s more than simply a car; for families that want the best in design, technology, and safety, it’s a mobile haven. The 2023 Chrysler Pacifica ushers in a brand-new age of automotive excellence where every journey is an unforgettable experience.

SEATS

Seats are a part of the Occupant Restraint system of the vehicle.

WARNING

1. It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
2. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed.
3. Be sure everyone in your vehicle is in a seat and using a seat belt properly.

MANUAL ADJUSTMENT FRONT SEATS — IF EQUIPPED

WARNING

1. Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked.
2. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.

Manual Front Adjuster
Both front seats are adjustable forward or rearward. The manual seat adjustment handle is located under the seat cushion at the front edge of each seat.

Manual Seat Adjustment

1. Forward/Rearward Adjustment Bar
2. Height Adjustment
3. Recline Lever

While sitting in the seat, pull up on the handle and slide the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.

WARNING

1. Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
2. Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.

Manual Seat Height Adjustment
The driver’s seat height can be raised or lowered by using a lever, located on the outboard side of the seat. Pump the lever upward to raise the seat height or pump the lever downward to lower the seat height.

Manual Front Seat Recline Adjustment
For models equipped with manual seats, the recline lever is located on the outboard side of the seat.
To recline, lean forward slightly, lift the lever and push back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position. Using body pressure, lean forward and rearward on the seat to be sure the seatback has latched.

WARNING
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.

MANUAL ADJUSTMENT REAR SEATS

WARNING

1. Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked.
2. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.

Manual Forward/Rearward Adjustment — Quad Seats (If Equipped)
Both second row seats are adjustable forward or rearward. The manual seat adjustment handle is located under the seat cushion at the front edge of each seat.

Manual Rear Seat Adjuster

While sitting in the seat, pull up on the handle and slide the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.

WARNING

1. Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
2. Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.

Manual Recline — Quad Seats

Recline Lever

To recline, lean forward slightly, lift the lever, and push back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position. Using body pressure, lean forward and rearward on the seat to be sure the seatback has latched.

WARNING
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.

Second Row Removable 8th Seat — If Equipped
While the 8th seat does not stow in the floor, it is foldable and removable for added cargo space.

Second Row 8th Seat Fold Flat Strap

The release strap is located on the front of the seat, near the floor. To remove the seat, pull the release strap to release the rear latches. The seat assembly can now be removed from the vehicle by moving it in a rearward direction from the detent positions in the floor.

Release Strap

NOTE:
The seat can be removed easier with one outboard seat stowed in the load floor.
To reinstall the seat, align the seat into the detent positions on the floor. Tilt seat rearward to lock the seatback into its original position.

In Floor Detent Guides

WARNING
If not properly latched, the seat could become loose. Personal injuries could result.

Fold-Flat Quad Seats And Stow ‘n Go Seats

NOTE:

1. You may experience deformation in the seat cushion from the seat belt buckles, or wrinkling of the seat fabric if the seats are left folded for an extended period of time. This is normal and by simply unfolding the seats to the open position, over time the seat cushion may return to its normal shape. Having an occupant sit in the seat, or massaging the fabric by hand may smooth away any excess wrinkling.
2. Permanent wrinkles may still result.

To fold the seat, lift the recliner lever to the full upward position and push the seatback forward until it rests on the seat cushion.

Fold-Flat Seat Recline Lever

NOTE

1. The seatback may lock into the fold-flat position. Use the recline lever to unlock the seatback.
2. If equipped with Stow ‘n Go seating: when returning the seat to the original position, the headrest must be folded back to the original position.

Stow ‘n Go Seating Head Restraint

Easy Entry
Easy Tilt Seat — With Or Without Child Seat Installed
The second row seats can be tilted forward for easy entry into the third row with or without a child seat installed.

1. Located in the seatback of the second row seat is a lever (or handle for Stow ‘n Go seats) that provides easier access to the third row by tilting the seat forward.
2. Slide the lever upwards, or if equipped, pull the handle forward, to unlock the seatback.
   
3. Push on seatback to slide seat forward to access the third row.
   
4. To put the seat back into original position, just pull back on the seatback and lock the seat into position.

WARNING
Do not use this feature with a child in seat. Serious injury or death may occur.

Easy Entry — With The Seat Folded Flat
The seats can be folded and tilted for more accessibility for passengers to enter and exit the third row.

1. Without a child seat installed, you can fold the seat by pulling the recliner handle on the bottom part of the seat. Before pulling the recliner lever, make sure the arm rests are folded up.
   
2. To put it back into position, pull back on the folded seat and make sure that it locks into position. Then, pull the seatback toward the back and fold down the arm rests.

Exit For Third Row Passengers — Stow ‘n Go Seats Only
If the second row is equipped with Stow ‘n Go, third row passengers can pull on the strap and push the seat forward for folding the seatback down and tilting the seat to the floor for an easy exit.

Pull Strap For Third Row Passengers

NOTE:
This process is for when there is no child seat installed. Use the easy entry lever if a child seat is installed.

Second Row Removable Quad Seat
The second row quad seats, not equipped with the Stow ‘n Go feature, are removable for added cargo space.

Removing Seat

1. Adjust seat to the full rearward position.
2. Lift the recline lever to fold the seatback flat against the seat cushion.
   Lift Recline Lever And Fold Seatback FlatNOTE:
   Push downward on the seatback to make sure it is in the locked position.
3. The release strap is located on the front of the seat, near the floor.
   
4. To remove the seat, pull the release strap to release the rear latches.
5. Tilt the back of the seat to the upward position.
   
6. The seat assembly can now be removed from the vehicle. Grab the front seatback edge located near the head restraint and the grab the bar on the rear side of the seat cushion for easy removal.

Seat Removal

Reinstalling Seat

1. To reinstall the seat: With the seat tilted forward, align the seat’s front attachments into the detent positions on the floor.
   
2. Tilt seat rearward to lock the seat back into its original position.
   NOTE:
   Push downward to ensure the rear latches are in the locked position.
3. Lift the recline handle and return the seat back to the seating position.

WARNING
If not properly latched, the seat could become loose. Personal injuries could result.

Manually Folding Third Row Seats —If Equipped

NOTE:

1. You may experience deformation in the seat cushion from the seat belt buckles, or wrinkling of the seat fabric if the seats are left folded for an extended period of time. This is normal and by simply unfolding the seats to the open position, over time the seat cushion may return to its normal shape. Having an occupant sit in the seat, or massaging the fabric by hand may smooth away any excess wrinkling.
2. Permanent wrinkles may still result.
3. Lower the center head restraint down to the seatback by pushing the button on the guide and pushing the head restraint down.
4. Pull release strap marked “1” to release the anchors.
   
5. Pull release strap marked “2” and tumble the seat rearward into the storage bin.

Strap “2”

Stowed Third Row Seat

To Unfold Third Row Seats

1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch.
   
2. Pulling strap “2” releases the seatback to return to its full upright position.
3. Strap “2”
4. Raise the head restraint to its upright position.

WARNING

1. In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure the seats are fully latched.
2. Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision. Always make sure the head restraints are in their upright positions when the seat is to be occupied.

Stow ‘n Go Seating
On vehicles equipped with Stow ‘n Go seating, the second and third row seats can be folded into the floor for convenient storage.

AUTO ADVANCE ‘N RETURN — IF EQUIPPED

On vehicles equipped with the Auto Advance ‘n Return feature, the front seat will move forward automatically to a location that will allow the second row Stow ‘n Go seat movement, without interference by the front seat. After the second row seat is stowed, the front seat will move back to the previous location once the Auto Advance ‘n Return button is pushed again.
The Auto Advance ‘n Return feature is available to both the front driver and passenger power seats (if equipped).

WARNING
During power seat operation, personal injury or cargo damage may occur. Ensure the front seat is not occupied and the seat travel path is clear when operating the power seat. A one-touch Auto Advance ‘n Return button is located on the B-pillar trim panel, just in front of the power sliding door.

Auto Advance ‘n Return Button (Left Side Shown)

Using the Auto Advance ‘n Return Feature

NOTE:

1. The button is only functional when the power sliding door is open and the vehicle is in PARK. If the door is not open or the vehicle is not in PARK when the button is pushed, the front seat will not move and a message will be displayed in the instrument cluster display.
2. If the power sliding door is closing when the button is pushed, the front seat will not move and a message will be displayed in the instrument cluster display.
3. The Auto Advance ‘n Return feature will not function if the front doors are open.
   1. Push and release the Auto Advance ‘n Return button.
   2. Perform the second row Stow ‘n Go seat movement.
   3. Push and release the Auto Advance ‘n Return button a second time. The front seat cushion and seatback will return to the original starting location.

NOTE:

1. To abort seat operation while seat is in motion, push the Auto Advance ‘n Return button, or push the front power seat button to stop the seat movement. Pushing the Auto Advance ‘n Return button again will return the front seat to the original starting location.
2. The Auto Advance ‘n Return system includes obstacle detection. When the system detects an obstacle, the seat will stop, reverse direction, and return to the previous location. A message will be displayed in the instrument cluster indicating that an obstacle has been detected.
3. If the front seat is already in a location that will allow space for Stow ‘n Go of the second row seat, the front seat will not move and a message will be displayed in the instrument cluster.
4. If calibration of the front seat is lost, the seat will auto-matically recalibrate when the Auto Advance ‘n Return button is pushed. This may result in the seat cushion moving forward and downward, before moving to the location that will allow space for the second row Stow ‘n Go seat movement.

SECOND ROW STOW ‘N GO

For Manual Seats: To stow the seat in the floor, move the front seat all the way forward using the manual seat adjustment bar. Move the seatback all the way forward using the recliner handle located on the outboard side of the cushion. Move the seat height to at least mid position using the height adjuster handle in the outboard side of the cushion.
For Power Seats: Push the Auto Advance ‘n Return button located on the B-pillar trim (if equipped).

1. To access the storage area, remove the floor mat (if equipped) and place the lock rod in the locked position.
   Lock Rod
   NOTE:
   1. Push the lock rod inward for the unlocked position.
   2. Pull outward on the lock rod for the locked position.
   3. For information on storage bin function with the seats rearward.
2. Pull the latch located near the second row seat to open the floor panel.
   
3. Pull the floor panel and position it toward the front seats while folding the top half down, and rest it against the front seats.
   
4. Remove the plastic storage bin (if equipped) from the storage area, and store in a safe location.
5. Fold the armrest upward and stow the seat by grabbing the strap on the lower part of the seatback, and guide the seat into the storage area.
   
6. Push down on the seatback to lock the seat into the storage area.
   
7. Close the floor by pulling the floor panel backwards by the bottom corner edge of the panel.
   Extend Floor Panel
8. Push down on floor panel to lock into place.
9. Readjust the front seat as needed, and replace the floor mat (if equipped).

WARNING
In a collision, serious injury could result if the seat storage bin covers are not properly latched:

1. Do not drive the vehicle with the storage bin covers open.
2. Keep the storage bin covers closed and latched while the vehicle is in motion.
3. Do not use a storage bin latch as a tie down.

CAUTION

1. The storage bin cover must be latched and flat to avoid damage from contact with the front seat tracks, which have minimal clearance to the cover.
2. Do not sit on the second row seat when it is in the stowed position with the seatback upright otherwise damage to the seat may occur.

TO UNSTOW SECOND ROW SEATS

For Manual Seats: To unstow the seat from the floor, move the front seat all the way forward using the manual seat adjustment bar.
For Power Seats: Push the Auto Advance ‘n Return button located on the B-pillar trim (if equipped).

1. To access the storage area, remove the floor mat (if equipped) and place the lock rod in the unlocked position.
   Lock Rod
   NOTE:
   1. Push the lock rod inward for the unlocked position.
   2. Pull outward on the lock rod for the locked position.
2. Pull the latch located near the second row seat to open the floor panel.
   
3. Pull the floor panel and position it toward the front seats while folding the top half down and rest it against the front seats.
   
4. Pull the strap located on the seat and pull the seat out of the storage area. Push the seat rearward making sure that it locks into the floor. Fold the seatback into the upright position and pull the headrest up.
   NOTE:
   The seatback may be locked, if it is, it will be necessary to use the recliner handle to unlock the back before folding into the upright position.
   
5. Replace the plastic storage bin into the storage area.
6. To position the floor panel back into its original state, grab the bottom corner and extend it outward.
   
7. Lay the floor panel flat and push down until it clicks into position.
   
8. Readjust the front seat as needed, and replace the floor mat (if equipped).

WARNING

1. In a collision, you or others in your vehicle could be injured if seats are not properly latched to their floor attachments. Always be sure the seats are fully latched.
2. Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision. Always make sure the head restraints are in their upright positions when the seat is to be occu-pied.

POWER ADJUSTMENT FRONT SEATS — IF EQUIPPED

Some models may be equipped with eight-way power seats for the driver and front passenger. The power seat switches are located on the outboard side of the seat. The switches control the movement of the seat cushion and the seatback.

Driver Power Seat Switches

1. Seat Switch
2. Seatback Switch
3. Lumbar Switch

WARNING

1. Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
2. Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
3. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.

CAUTION
Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path.

Adjusting The Seat Forward Or Rearward
The seat can be adjusted both forward and rearward by using the seat switch. The seat will move in the direction of the switch. Release the switch when the desired position has been reached.

Adjusting The Seat Up Or Down
The height of the seats can be adjusted up or down. Pull upward or push downward on the rear of seat switch, the seat will move in the direction of the switch. Release the switch when the desired position has been reached.

Tilting The Seat Up Or Down
The angle of the seat cushion can be adjusted in two directions. Pull upward or push downward on the front of the seat switch, the front of the seat cushion will move in the direction of the switch. Release the switch when the desired position has been reached.

Reclining The Seatback
The angle of the seatback can be adjusted forward or rearward. Push the seatback switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position is reached.

WARNING

1. Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
2. Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
3. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.

CAUTION
Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path.

Power Lumbar — If Equipped

Power Lumbar Switch Location

The front driver’s seat may be equipped with a four way lumbar adjustment. The power lumbar switch is located on the outboard side of the equipped power seat. Push the switch forward or rearward to increase or decrease the lumbar support. Push the switch upward or downward to raise or lower the lumbar support. The front passenger’s seat may be equipped with either a two way or a four way lumbar adjustment. Push the switch forward or rearward to increase or decrease the lumbar support, and if equipped, push the switch upward or downward to raise or lower the lumbar support.

Easy Entry/Exit Seat — If Equipped
This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle.
The distance the driver seat moves depends on where you have the driver seat positioned when you place the vehicle’s ignition in the OFF position.

1. When the ignition is placed in the OFF position, the driver seat will move about 2.4 inches (6.8 cm) rear-ward if the driver seat position is greater than or equal to 2.7 inches (6 cm) forward of the rear stop. The seat will return to its previously set position when the igni-tion is cycled out of the OFF position.
2. When the ignition is placed in the OFF position, the driver seat will move to a position 0.3 inches (0.7 cm) forward of the rear stop if the driver seat position is between 0.9 – 2.7 inches (2.3 – 6.8 cm) forward of the rear stop. The seat will return to its previously set posi-tion when the ignition is cycled out of the OFF position.
3. The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than 0.9 inches (2.3 cm) forward of the rear stop. At this position, there is no benefit to the driver by moving the seat for Easy Exit or Easy Entry.

When enabled within Uconnect Settings, Easy Entry and Easy Exit positions are stored in each memory setting profile (if equipped).

NOTE:
The Easy Entry/Exit feature is enabled or disabled within the Uconnect system.

POWER ADJUSTMENT REAR SEATS —IF EQUIPPED

WARNING

1. Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
2. Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
3. Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.
4. Do not place the seat belt webbing behind the third row stow clip when using the seat belt to restrain an occupant. The seat belt will not be positioned prop-erly on the occupant and they could be more seri-ously injured in an accident as a result.

CAUTION
Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path.

Third Row Power Recline — If Equipped
The power recline feature, located on the trim panel next to the seat, adjusts the seatback angle forward/rearward for occupant comfort.

Reclining The Seatback
The angle of the seatback can be adjusted forward or rearward. Push and hold the forward or rearward button, the seat will move in the direction of the button push. Release the button when the desired position is reached.

Third Row Power Seat Switch

NOTE:
The third row power recline buttons can be locked out using the Third Row Lockout setting within the Uconnect system.

Third Row Power Stow ‘n Go Seat — If Equipped
A one-touch power folding seat switch is located in the right rear trim panel as part of a switch bank.

NOTE:
The third row outboard seat belts may interfere with the power folding of the seat. Place the seat belt webbing behind the stow clip before stowing or opening the seat. When the seat is in the desired position, remove the webbing from the stow clip so that it is ready for use. Never leave the seat belt in the stow clip when it is used to restrain an occupant.

NOTE:

1. The outer head restraints will lower automatically as necessary when the power seat begins to move.
2. The center head restraint raises and lowers manually but will not lower automatically.
3. The head restraint can also be lowered manually using the pull strap located at the back of the seat.

The switch is only functional when the liftgate is open and the vehicle is in PARK.
The rear switch bank allows multiple power folding and unfolding positions for the third row seats. Left and right third row seats can be folded individually or together. The third row power folding seat adjusts to the following positions using the switch bank located on the left rear trim panel:

Rear Panel Power Switch Bank

1. Open To Normal
2. Stow
3. Fold Forward/Rearward
4. Right/Left Seats/Both Seats

To move the selected seat(s) to the normal (seated) position, push and release the “Normal” button. The seat will automatically stop when the Normal position is reached. To move the selected seat(s) to the stow position, push and release the “Stow” button. The seat will automatically stop when the Stow position is reached. To move the selected seat(s) back in the forward or reverse direction, push and hold the “Fold Forward/Back” button. Release the button when the desired position is reached.

1. Disconnect the center shoulder belt from the mini-buckle before attempting to fold/stow the power third row seats.
2. Before pushing the “Normal” or “Stow” button, place the outboard seat belt webbing behind the stow clips, located on the rear trim panel. When the seat reaches the desired position, remove the webbing from the clip so it is ready for use to restrain an occupant.
3. To abort seat operation while seat is in motion, push a different seat position selector switch to stop the seat. Once the seat stops moving, then the desired position can be selected.
4. The third row power seat system includes obstacle detection. When the system detects an obstacle, the motors will stop and reverse direction. Should this occur, remove the obstacle before pushing the button again.

NOTE

1. You may experience deformation in the seat cushion from the seat belt buckles, or wrinkling of the seat fabric if the seats are left folded for an extended period of time. This is normal and by simply unfolding the seats to the open position, over time the seat cushion may return to its normal shape. Having an occupant sit in the seat, or massaging the fabric by hand may smooth away any excess wrinkling.
2. Permanent wrinkles may still result.

HEATED SEATS

Front Heated Seats — If Equipped
The front heated seats control buttons are located in the touchscreen. You can choose from HI, LO or off heat settings. The indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for HI, one for LO and none for off.

1. Press the heated seat button once to turn the HI setting on.
2. Press the heated seat button a second time to turn the LO setting on.
3. Press the heated seat button a third time to turn the heating elements off.

The level of heat selected will stay on until the operator changes it.

NOTE:

1. Once a heat setting is selected, heat will be felt within two to five minutes.
2. The engine must be running for the heated seats to operate.

For information on use with the Remote Start system,

WARNING

1. Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time.
2. Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat.

Rear Heated Seats — If Equipped
On some models, the second row seats are equipped with heaters. There are two heated seat switches that allow the second row passengers to operate the seats independently. The heated seat switches are located on the sliding side door handle trim panels.

Second Row Heated Seat Switch (Left Side Shown)

You can choose from HI, LO or off heat settings. Amber indicator lights in each switch indicate the level of heat in use. Two indicator lights will illuminate for HI, one for LO and none for off.
Push the switch once to select HI-level heating. Push the switch a second time to select LO-level heating. Push the switch a third time to shut the heating elements off.

NOTE:
Once a heat setting is selected, heat will be felt within two to five minutes. When the HI-level setting is selected, the heater will provide a boosted heat level during the initial stages of operation. Then, the heat output will drop to the normal HI-level. The level of heat selected will stay on until the operator changes it.

VENTILATED SEATS — IF EQUIPPED

Located in the first row seat cushions are small fans that draw the air from the passenger compartment and move air through fine perforations in the seat cover to help keep the driver and front passenger cooler in higher ambient temperatures. The fans operate at two speeds: HI and LO. The front ventilated seats control buttons are located in the touchscreen.

1. Press the ventilated seat button once to choose HI.
2. Press the ventilated seat button a second time to choose LO.
3. Press the ventilated seat button a third time to turn the ventilated seat off.

NOTE:
The engine must be running for the ventilated seats to operate.
For information on use with the Remote Start system,

FAQs

Useful Link

Download Link: 2021 Chrysler 300 Owner’s Manual
2023 Chrysler Pacifica Seat Setup Guide