2020 Citroen jumper Owner’s Manual

The 2020 Citron Jumper, a commercial van that can do a lot of different things, is a mix of usefulness and modernity. It has a strong exterior design that puts a lot of focus on functionality and adaptability. This makes it good for a wide range of business uses. The Jumper has a large, well-thought-out cabin with plenty of room for cargo and comfortable seats to meet the needs of both drivers and passengers. Advanced technology features, like the ability to connect to the internet and driver-assistance systems, make driving easier and safer. The 2020 Citron Jumper shows that Citron is committed to giving businesses and professionals looking for a reliable work vehicle a reliable and efficient option.

Key

This locks and unlocks the vehicle’s doors opens and closes the fuel filler cap, as well as switching the engine on and off.

2-button remote control

Central unlocking
Pressing this button simultaneously unlocks all of your vehicle’s doors. The interior courtesy lamp comes on briefly and the direction indicators flash twice. If your vehicle has an alarm, pressing this button disarms it. The indicator lamp in the central locking button, located in the dashboard, goes off.

Central locking
Pressing this control allows you to simultaneously lock all your vehicle’s doors. If one of the doors is open or not properly closed, central locking does not work. The direction indicators flash once. If your vehicle is so equipped, pressing this control activates the alarm. The central locking control indicator lamp comes on and flashes.

3-button remote control

Unlocking the cab
Pressing this button unlocks your vehicle’s cab. The interior courtesy lamp comes on briefly and the direction indicators flash twice. The indicator lamp in the central locking button, located in the dashboard, goes off.
Unlocking the load space
Pressing this button unlocks the side door and the rear doors of the load space. The direction indicators flash twice. If your vehicle has an alarm, pressing this button disarms it.
Central locking
Pressing this control allows you to lock all the doors of your vehicle, cab, and loading area. If one of the doors is open or not properly closed, central locking does not work. The direction indicators flash once. If one of the doors is open or not properly closed, central locking does not work. The direction indicators flash once. The central locking control indicator lamp comes on and flashes.

Folding / Unfolding the key
Press this button to unfold/fold the key.
Warning: If you do not press the button, you risk damaging the mechanism.

Deadlocking
Pressing this button twice in succession deadlocks the vehicle. It is then impossible to open the doors from the inside or the outside. The direction indicators flash three times.
Important: Never leave anyone inside the vehicle when it is deadlocked.

Changing the battery
Reference: CR 2032/3 volts.

• Press the button to eject the key.
• Turn screw 1 from the closed padlock to the open padlock, using a fine-tipped screwdriver.
• Lever with the screwdriver to extract the battery holder unit 2.
• Remove the unit and replace the battery 3 respecting the polarities.
• Reclose the battery holder 2 inside the key and lock it by turning the screw 1.

Important: There is a risk of damage if the replacement battery is not of the correct type. Only use identical batteries or batteries of an equivalent type to those recommended by CITROËN dealers. Return used batteries to approved collection points. Using the key in the driver’s door lock does not activate/deactivate the alarm.

Locking/Unlocking from inside
Cab and loading area

• Press this button to lock/unlock the cab doors and the loading area.
• The doors can still be opened from the inside.
  Note: If one of the doors is open or not properly closed, central locking does not work.

The control indicator lamp:

• comes on when the doors are locked and from when the ignition is switched on, – then flashes when the doors are locked when stationary with the engine off.

Caution: This button is inoperative if the vehicle has been locked or deadlocked using an exterior control (depending on the equipment, with the key or the remote control).
Important: Driving with locked doors can make it more difficult for emergency services to access the vehicle in case of an emergency.

Loading area
Press this button to lock/unlock the side door and the rear doors of the cab. The indicator lamp remains illuminated when locking.

Anti-intrusion security
When the vehicle is started, the system locks the cab and load space doors automatically when you reach approximately 12 mph (20 km/h).
If none of the doors is opened during the journey, the locking remains active.

Activation/deactivation of the function
This function can be set using the MODE button: select “ON” or “OFF” in the “Autoclose” menu.

Front doors

• Use the corresponding button on the remote control or use the key in the driver’s door lock to unlock.
• Pull the handle towards you.

Sliding side door
Take care not to block the guide space on the floor to allow the door to slide correctly.

Opening

• From outside: Pull the handle towards you and then towards the rear.
• From inside: To unlock and open, push the handle towards the rear.

Important

• To keep the sliding side door open, open it completely to lock the device at the base of the door.
• Do not drive with the sliding side door open.

Closing

• From outside: Pull the handle towards you and then towards the front.
• From inside: To unlock and close, pull the handle while sliding the door.

Rear doors
Important: With the vehicle stationary, opening the rear doors activates the camera and sends the image to the screen fitted in the cab.

Opening

• From outside: Pull the handle towards you and then pull the lever to open the left-hand door. The two doors open to 96°.
• From inside: Pull the handle located on the door panel towards you, then push to open the right-hand door. Push the lever to open the left-hand door. Do not drive with the rear door open.

Opening to 180°
If the vehicle is so equipped, a retractable check strap system allows the opening to be increased from 96° to 180°. Press the button located on the door panel to extend the angle of the door. The check strap will engage again automatically on closing.

Closing
To close, start with the left-hand door, then close the right-hand door.

Alarm
A system that protects and provides a deterrent against theft and break-ins. If your vehicle is so equipped, it provides the following types of monitoring:

• Perimeter monitoring the system ensures exterior perimeter protection by detectors on the openings (doors, boot, bonnet) and in the electrical power supply,
• Anti-tilt monitoring The system checks for any change in the attitude of the vehicle.

Activation

• Switch off the ignition and exit the vehicle.
• Press this button on the remote control.
• The protections are active after a few seconds.

 

Triggering of the alarm
This is signaled by the siren sounding and flashing of the direction indicators for thirty seconds. The alarm then returns to monitoring mode but the triggering event is stored and is indicated by illumination of the electronic immobiliser warning lamp for about 10 seconds when the ignition is switched on. The alarm is also triggered after the interruption of the electrical supply and when it is reconnected.

Deactivation using the remote control
Press this button. The standby mode is deactivated when the vehicle is unlocked.

Deactivating the anti-tilt monitoring
(Depending on the engine)

• Press this button to deactivate the protection (e.g. when towing the vehicle with the alarm on).
• The protection remains active until the central opening of the doors.

Failure of the remote control

• Unlock the doors using the key in the lock; the alarm goes off.
• Turn the ignition on; the identification of the key code will turn off the alarm.

Locking the doors using the key in the lock does not activate the alarm. To deactivate the siren quickly following a false alarm:

• Switch on the ignition, recognition of the key code stops the alarm,
• Press the unlocking button (cab and key) on the remote control.
• To avoid setting the alarm, when washing the vehicle, for example, lock the vehicle using the key.
• Unlocking the vehicle using the remote control deactivates the siren automatically.

FAQ’s